Signal converters - Import export

The 9206 USB sensor interface series is ideally suited to Notebook-based mobile use for high-precision, traceable calibration jobs that must be performed on-site for equipment such as presses, torque measurement facilities and pressure control systems. A factory calibration certificate or German-accredited DAkkS calibration certificate can optionally be provided for the USB interface plus relevant sensors, ensuring compliance even with the stringent traceability requirements of quality assurance standards. Specific characteristics: —Cost effective "Plug&Measure" concept —24-bit resolution —Practical and convenient DigiCal calibration and data acquisition software —Pt100 as option —Free LabView driver DLL for integrating in your own software environment —Multipurpose reference measurement chain with optional factory calibration certificate or Germanaccredited DAkkS calibration certificate —6-wire connection technology

This device is used for converting standardized analog signals (0(4)-20mA, 0-10V, 0-5V) for example 4-20mA input to 0-10V output. The device has to be ordered for the specific conversion and can not be changed afterwards.

• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Accuracy 0.1%

• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Small dimensions • Accuracy 0.1%

• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Minimal range: 50 °C • Accuracy 0.1%

Supported Analog Outputs: - voltage: 0 .. ± 10 V, 0 .. ± 5 V, 5 .. ± 5 V - current: 4 .. 20 mA, 12 .. ± 8 mA 24 VDC Power supply Built-In Electronic Filter DIN Rail Mounting

Portable display unit for force (weight, torque, pressure) measurement with ability to record data. Communication with PC via USB interface.

The amplifier module model 9243 is used wherever measurement signals from strain gauges, potentiometric sensors or DC/DC sensors have to be converted into standard signals. Simply by mounting on conventional DIN-mount rails, it is possible to position the amplifier module on location, in the proximity of the sensor. Especially for rough environments a IP65 version is available. The broad auxiliary power range and the choice between AC or DC permits operation on standard power supplies used in switch gear cabinets. A highly precise reference voltage source is built-in for calibration purposes. A calibrating shunt can also be connected via two separate terminals. This permits deliberate detuning of a strain gauge sensor for calibration or merely to check the measuring chain.

Adjustable pressure switch type PR as a robust standard model in the pressure range 1 - 10 bar. For converting pneumatic signals into electrical signals. Please also note our separate pressure/temperature/level product range.

The RS422/USB converts digital signals from up to 4 optical sensors into a USB data packet. The new converter has 4 trigger inputs and a trigger output for connecting additional converters.The data are output via an USB interface. The converter as well as the connected sensor are parametrisable by software.

The interface and signal processing units extend the field of application of Micro-Epsilon sensors. The interface modules are used to convert sensor signals into digital or bus-compatible interfaces. This enables interfaces such as USB, RS422, Ethernet/IP, Profinet and EtherCAT for numerous sensors. The signal processing units are also used to record several sensor signals, to calculate and output them together. This is necessary, for example, for planarity measurement or thickness measurement.

In practice the requirement often arises to convert the measurement signals of a sensor into a standard signal in the simplest possible manner in the immediate proximity of the sensor. This permits trouble-free, low-loss transmission of measured values over longer distances to an instrument board or plant controls. Ideally suited for this purpose is the in-line measuring amplifier, which is inserted in between in the connection cable by means of plug contacts. Owing to its compact, robust design and low weight, it finds use in almost any application. Even movable locations subject to forces of acceleration, for example manipulators, present no problems. It is intended mainly for use of control cabinets in just about any location and is matched to a specific sensor. The aluminium housing is extremely sturdy and affords the greatest possible protection even in harsh environments.

With its rugged housing and a stainless steel sensor element, the transducer is particularly robust and ideally suited to the harshest environments. This also means that the sensor can be installed anywhere with no effect on the measurement signal. The built-in instrumentation amplifier converts the sensor signals into noise-immune voltage signals or current signals that can be transmitted over relatively long distances. For high viscose materials, a front-level membrane M12 x 1 is available, and with this disruptive dead volumes can be expelled. The sensor has a small protected hole on the rear to allow measurement of atmospheric pressure (measurement type relative). For the absolute measurement option, the applied pressure is measured with respect to an enclosed vacuum. As an electrical connection, a DIN 43650A valve connector or an M12 x 1, 4-pin connection is available.

The IEC 6185092 LE Merging Unit is the optimal solution for process bus interfacing. It allows the consolidation of measurements made in the switchyard, feeding protection relays, meters and fault recorders located in the control room. The use of fiberoptical communications makes it inherently safe. By eliminating the majority of copper wiring, the CSN® Merging Unit addresses key technical and logistic challenges affecting the cost of substation design, construction and maintenance. The simple and disturbancefree architecture of the open IEC 6185092 process bus allows operation of relay, meter and faultrecording equipment of different manufacturers on the same bus. The IEC 6185092 LE Merging Unit collects data from conventional instrument transformers and converts the analog signals into a digital protocol

The sensor model 8228 with its measuring accuracy of 0.05% F.S. (for the measuring ranges ≤ 1 bar, the measuring accuracy is 0.1% F.S.) ideally suited as a reference sensor. The compact dimensions, the robust housing and the industrial-grade output signal result in a very wide range of applications. All components in contact with media are made of stainless steel. An integrated measuring amplifier converts the measuring signals directly into interference-free voltage signals or current signals that can be transmitted over long distances. With the „gage“ measurement type, the pressure measurement is carried out against the ambient pressure, the sensor has a bore that is protected against ambient influences to compensate for the ambient pressure. With the „Absolute“ measurement type, the applied pressure is measured against an enclosed vacuum; this measurement type is available from the measuring range 0 ... 250 mbar. The electrical connection is made via an M12 x 1 connector.

The decentralized module µCAN.6.ai-SNAP is designed to acquire up to 6 analogue current / voltage signals and converts them into digital CAN signals.

LMP 307T for continuous level and temperature measurement . Advantage: simultaneous recording of level and temperature with separate independent signal amplification. In addition to classical signal processing of the level, an additional signal circuit independent of the level which converts the temperature signal into a 4 … 20 mA analogue signal in 2-wire technology is provided. For drinking water purification, monitoring of rainwater overflow basins and river courses, in addition to level measurement in containers or tank batteries. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0,35 % (opt. 0,25 %) FSO — diameter 26,5 mm — separate output signals for pressure and temperture ranges — easy handling — low maintenance and wiring costs Optional Features: — drinking water certificate acc. to DVGW and KTW — different kinds of cables and elastomers — customer specific versions

Magtrol’s line of Displacement Transducers provide contactless measurement of absolute piston position in hydraulic and pneumatic cylinders and other applications. Their robust construction, large insensitivity to shocks and very long life (due to no moving parts and therefore no wear of components) make them both cost effective and very reliable. Magtrol transducers offer a wide range of operational temperatures and admissible pressure resistance for even the most demanding applications. The transducer provides a direct 4 - 20 mA output signal corresponding to the measuring range, as well as VDC temperature output. As an option Magtrol offers the CST 113 Signal Converter, which allows the complete chain to be calibrated according to the specific needs, either in current or voltage output. The DI Series of displacement transducers were developed principally for OEM applications in the hydraulic industry.

The OPTIFLUX 6000 is an electromagnetic flow sensor for hygienic applications. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 6050, OPTIFLUX 6100 and OPTIFLUX 6300 electromagnetic flowmeters.

The OPTIFLUX 2000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 2050, OPTIFLUX 2100 and OPTIFLUX 2300 electromagnetic flowmeters for basic to advanced water and wastewater applications.

The OPTIFLUX 5000 is an electromagnetic flow sensor. Combined with the IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 5100 and OPTIFLUX 5300 electromagnetic flowmeters for aggressive and abrasive media and other demanding applications with conductive liquids.

The OPTIMASS 2000 is a Coriolis mass flow sensor. Combined with the MFC 400 signal converter it forms the OPTIMASS 2400 high-performance Coriolis mass flowmeter for bulk mass and high volume flow measurement of gases and (non-)conductive liquids.

The OPTIMASS 3000 is a Coriolis mass flow sensor. Combined with the MFC 010 and MFC 400 signal converters it forms the OPTIMASS 3010 and OPTIMASS 3400 Coriolis mass flowmeters for demanding low flow and dosing applications with gases and (non-) conductive liquids.

The OPTIMASS 6000 is a Coriolis mass flow sensor. Combined with the MFC 400 signal converter it forms the OPTIMASS 6400 high performance Coriolis mass flowmeter for all process applications including cryogenic or high temperature media as well as high pressure fluids.

The OPTIFLUX 1000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 1050, OPTIFLUX 1100 and OPTIFLUX 1300 electromagnetic flowmeters for water and other conductive, non-abrasive media and OEM machinery applications.

The OPTIFLUX 4000 is an electromagnetic flow sensor. Combined with the IFC 050, IFC 100 or IFC 300 signal converters it forms the OPTIFLUX 4050, OPTIFLUX 4100 and OPTIFLUX 4300 electromagnetic flowmeters for basic to advanced applications with aggressive and abrasive media or other conductive liquids.

The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. The OPTISONIC 6300 P consists of a combination of one or two clamp-on sensors and one handheld electronic signal converter. The robust clamp-on rail can be easily attached to almost any pipe up to DN1500/160". The readings of the meter are shown on the handheld LCD and are stored in the integrated memory for data logging. In addition, all readings can be transferred to a PC via the included USB stick in order to further analyse or store the data.

NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces the expense of installation and maintenance

Stainless-steel stick-in sensor, Pt100, integrated measuring amplifier. Compact and robust design up to protection class IP68. High accuracy, with integrated signal converter (standard industrial signals). Available in various immersion depths. Over voltage and overload protection. In 2-wire or 3-wire version. Can be used universally; suitable for long line lengths. Measuring ranges can be customised.