Results for
SITEMA GMBH & CO KG
Germany
Securing vertically moving masses Safety for oblique and vertical axes Typical applications include oblique-angled and vertical axes in the automation industry to provide vital protection of personnel and machinery. Series KSP For small to medium-sized loads DGUV-approved One load direction
Request for a quotePLUS SAFETY
Turkey
It is a consumable used in perfusor devices to give a drug to the patient at a certain time and at a certain rate. Since its tip can be locked in the form of a luer lock, it minimizes drug leakage and wrong drug delivery. There are two types, transparent and light sensitive. It is available in 2/3ml,5ml,10ml,20ml,50/60ml transparent and light sensitive (orange) sizes according to needs. Manufactured according to DIN EN ISO 7886. Our perfuser injectors, which have been used for a long time throughout Turkey with their wide product range, are compatible with all devices. Sterile, non-toxic, apyrogenic It has a latex-free double sealed piston with a special safety brake. With luer-lock connector. It has 15Gx1″ needles. PVC-free blister pack, Gamma(R) and/or E.O. has been sterilized. Opaque injectors are available in Black and Orange color options. Air bubbles and possible particles in the fluid can be easily observed in the orange injector.
Request for a quoteGEDA GMBH
Germany
Two in one: construction hoist with 500 kg loading capacity and transport platform for 3 persons max. Very innovative is the new foldable platform and a fork take-up point is included as standard. The GEDA 300 Z/ZP lift is perfect for operation in narrow driveways and backyards as the flat cable bin is saving even more space. There are different reasons to decide in favour of the GEDA 300 Z/ZP: The usage as construction hoist or transport platform (possible by using two separate controls), safety devices (limit switches, speed dependent safety brake, overload switch-off) and the using of the GEDA UNI-MAST are only a few convincing arguments for the GEDA 300 Z/ZP.
Request for a quoteGEDA GMBH
Germany
The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.
Request for a quoteGEDA GMBH
Germany
The GEDA 2 PK is a rack and pinion hoist with aluminium ladder segments. Its flexible system allows for the hoist to be installed to any kind of crane up to a standard height of 150 m (higher heights on request). This makes it a safe and quick transport system for crane conductors and maintenance personnel and materials. Its overspeed safety brake guarantees safe transport. Electrical safety devices prevent faulty operation. You can control the hoist from the control board in the car. (option: control to be changed to the outside or to the car). When the car is opened, a small ramp with lateral protection will open, too, forming a safe transition to the car together with the access enclosure. In order to put on the mast segments, the roof has to be opened. The lightweight ladder segments can be easily installed in a safe way. These are connected without bolts, with the help of a patented quick lock system.
Request for a quoteGEDA GMBH
Germany
The GEDA PH personnel and material hoist is now as a complete series available. Three standard versions have been developed up to now. All adjustable to desired specifications or conditions at construction site. Lifting height up to 400 m and three different lifting speeds and different car sizes are available. Both mast systems enable single and twin usage. You can choose between three standard control systems: stop next landing, single automatic or fully automatic. Different door systems in combination with the electrically and mechanically interlocked landing level gates round off the profile of the new PH range. The well-known engineered safety features like the over speed safety brake and overload protection or limit switches at the upper and lower level are of course part of the standard equipment. Of course the PH range is configurated according the new EN machinery directive 2006/42/EG or to national valid regulations.
Request for a quoteUNIFLEX-HYDRAULIK GMBH
Germany
The EM 115 is a highly productive hose cutting machine. The machine is best suited for high volume manufacturing of 2" hoses along with workshop capability for 3" high pressure hose and 3" industrial hose. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield
Request for a quoteUNIFLEX-HYDRAULIK GMBH
Germany
For each type of workshop: This cutting machine with its 3 kW drive is also available as an ecoline or DC variant. For hydraulic hoses up to 2”. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield
Request for a quoteUNIFLEX-HYDRAULIK GMBH
Germany
The new 2" 4SH + SAE R 15 hose cutting machine for workshops (also as a 3" industrial machine available). Designed to perfection. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield
Request for a quoteUNIFLEX-HYDRAULIK GMBH
Germany
For each type of workshop: This cutting machine with its 3 kW drive is also available as an ecoline or DC variant. For hydraulic hoses up to 1 ¼”. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield
Request for a quoteUNIFLEX-HYDRAULIK GMBH
Germany
The safe high-quality cutting machine for the production process. All cutting blades are made of carefully tested material which ensures optimum cutting quality. 7.5 kW drive max. For hydraulic hose assemblies up to 3” and industrial hose assemblies up to 4”. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield
Request for a quoteUNIFLEX-HYDRAULIK GMBH
Germany
This production cutting machine is available as a manual and as a pneumatic variant. Its cutting motors ensure optimum cutting results thanks to their unique minimum vibration. 4.6 kW drive. For hydraulic hose assemblies up to 2” and industrial hose assemblies up to 4”. Unique drive motor with double bearings and oversized shafts •Reduce scrap with straight cuts •More cuts between sharpening while increasing profits •Less contamination in the shop and in the end product will result in more parts out the door and a better environment in the building •Maximizes motor life, giving you the lowest cost of ownership in the market •Cut faster and generate a more saleable product Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield
Request for a quoteUNIFLEX-HYDRAULIK GMBH
Germany
The small, light-weight cutting machine for workshops. 1-phase drive, 1.2 kW. For hydraulic hoses up to 1”. Quality steel blade •Long lasting German quality steel blades, lowering the cost of ownership Compact design •Ideal for a mobile service CE compliant •Brake motor for safety •Security shield
Request for a quoteBEITO
Belgium
Off road it is tenacious and reliable. On road it provides comfort, excellent traction and resistance to wear. A versatile and safe tyre, the SCORPION™ ATR features a tread with a specific self-cleaning pattern. It facilitates the most demanding off-road driving and resists the hardest shocks on uneven surfaces. Once back on the road it provides safety when braking and whilst cornering. It delivers a high resistance to aquaplaning and low rolling noise, which enhances the acoustic comfort in the cabin. Excellent traction in all road conditions. Characterisation as an all terrain tyre, this is confirmed by its ability to provide a safe and controlled performance on the most diverse surfaces, from gravel to mud, it offers a reassuring grip. Scorpion™ ATR features the M+S marking engraved on the sidewall.
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
The Elevation Line includes both DC spring-pressure single-disc brakes as well as spring-pressure double-disc brakes which comply with EN 81 (Safety Regulations Concerning the Design and Installation of Elevators). Integrated micro-switches allow for remote inquiry of the brake condition (armature position, wear, armature bearing). Owing to the patented safety concept, the otherwise mandatory testing of the dual-circuit braking system of the spring-pressure brake at the approval of the elevator system can be dropped. The brake can be used in places where short construction lengths with respective system components like motor, gear and brake must be realized. The Elevation Line is primarily used for elevators, but can be used wherever the brake must meet demanding safety requirements. Electromagnetic spring-pressure brakes build up the braking torque when the current is switched off.
Request for a quoteKENDRION (VILLINGEN) GMBH
Germany
The spring-applied brakes which are ideally suited for robotics is designed for robotics solutions and loads of up to appr. 20 kg, but it can also be used in other applications requiring small geometrical dimensions. With regard to their power density the slim single-disc brakes are flatter and lighter than the market standard, and due to their large inner diameter they are well suited for hollow-shaft drives. This makes them perfect for applications in lightweight robots with integrated drives. There is a growing demand for safety technology in order to avoid injuries by collisions, especially if the control technology or even the power supply fails. In this case electromagnetic brakes are usually the method of choice. As safety brakes they bring moving masses to a stop, keep loads in position and therefore prevent humans and material assets from being affected.
Request for a quoteAHN BIOTECHNOLOGIE GMBH
Germany
AHN's comprehensive Benchtop Equipment range includes a variety of centrifuges, such as small benchtop, universal, clinical, hematocrit, and refrigerated options, multiple vortex mixer options, rollers and rotators, and magnetic stirrers with and without heating. This range offers impressive user-friendly and safety features, making it easy and safe to use. Every instrument is extremely robust, designed for extended runs, and operates quietly. They also have a small footprint, taking up minimal benchtop space. Safety features include an electronic safety brake system to prevent the lid from opening during operation and suction pads for stable operation. The instruments are equipped with brushless DC motors that require no maintenance, making them ideal for extended runs. The equipment is designed with the user experience in focus, featuring large displays and intuitive interfaces for increased comfort. The equipment comes with a two-year warranty.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
POUGET
France
The POUGET VT.3 Vibrating Tamping Set is supplied with : 1 Generating Set (petrol or diesel) three phase 220/380 V-50 Hz with an automatic safety brake, mounted on 2 rubber wheels. Fuel Motor Power (KVA) Weight (Kg) Essence HONDA LOMBARDINI 6 7 100 106 Diesel HATZ LOMBARDINI 6 112 4 Portable Vibrating Tampers at individual drive with automatic safety brake switch, and 10 meters insulated protective cable. . - Multiple vibrating directions - Unit power = 0,77 KW - Vibrations/min. : 50 Hz - Vibrating strength of tamping-blade : 660 Kg - Hardeness of tips = 63/68 Rockwell C - Unit weight of each tamper : 32 Kg The Portable Vibrating Tamping Machine is equipped with an operating adjustable handle in height and one safety brake switch. 1 Distributor Panel with : - 1 cable reel comprising 50 m. - 1 emergency stop button - 4 security connection - 1 general brake - weight = 32 Kg Noise level for the Workmen in operation : 90 dB (A) Vibrating level on Workmen handles : 5 m/s² IMPORTANT :
Request for a quotePOUGET
France
USE : Renewal of rails and Crossings, (Lifting and Lining of Track). Loading and Unloading Switches and Crossings on Track Motor Car. ADVANTAGES : Highly Safety Equipment. Easily to carry and to transport . Horizontal Beams made from reinforced aluminium alloy. Hoists equipped with a safety brake. Steel Legs with Wheels and Handles for carrying on rails. Length Horizontal Beam (m) Lifting Capacity Kg) Quantities Ref. Hoist Control Weight Gantry Crane alone (kg) Fixed Leg Adjust. Leg Hoist and Tong 1.2 990 1 1 1 559/1 Crank Handle 49 Small 1.8 990 990 1 1 2 1 1 560/2 560/23 Crank Handle Crank Handle 75 86 Medium 3 1600 1980 1600 1980 2 2 2 2 1 2 1 2 560/3 560/31 560/32 560/33 Crank Handle Crank Handle with Chain with Chain 120 Large ( *) 3.5 3200 2 2 560/34 with Chain 130 Super-large SNCF AGREEMENTS Agreed Models Nos. Agreements 560/2 and 560/23 IMT 07131 560/3 IMT 07132 OPTIONS : - ( * ) The Ref. 560/34 with Pivoting Transport Wheels Device allowing to circulate on auxiliary la
Request for a quotePOUGET
France
USE : Lifting of the rail for various purposes. Lifting and lining of the track. ADVANTAGES : Lightweight and durable Equipment (all-aluminium construction) - Reinforced Aluminium Body - Aluminium Legs with handles - Lifting Stroke = 55 cm - Footing = 45 cm - Lifting Capacity = 990 Kg / 1000 Kg - Chain Hoist with Safety retaining brake and standard Rail Tong - Weight = 23 Kg (with full Hoist) - Reference : 560/6 OPTIONS : - Lifting Capacity 2000 Kg - Ref. 560/7 - Tong for Tramway (Grooved rail) - Ref. 662-T - Tong with Rollers for moving the rail - Ref. 61
Request for a quoteWÖHLER GMBH
Germany
APPLICATION * For sweeping chimneys, ventilation systems or pipes ADVANTAGES * Adjustable brake and safety lock * Can be used standing upright or in horizontal position * Integrated holder for up to 3 stars * GRP Rod with resistant coat and length marking
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer hard treads Type – H WITHOUT SAFETY BRAKE: Code 758 WITH SAFETY BRAKE: Code 756 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 755 WITH SAFETY BRAKE: Code 765 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Black Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n.125 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer hard treads Type – H WITHOUT SAFETY BRAKE: Code 470 WITH SAFETY BRAKE: Code 480 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 696 WITH SAFETY BRAKE: Code 614 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Black Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 200 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer hard tread Type – H WITHOUT SAFETY BRAKE: Code 750 WITH SAFETY BRAKE: Code 760 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 766 WITH SAFETY BRAKE: Code 768 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Black Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 125 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer hard treads Type – H WITHOUT SAFETY BRAKE: Code 710 WITH SAFETY BRAKE: Code 720 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 701 WITH SAFETY BRAKE: Code 707 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Black Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 150 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer hard treads Tipo – W WITHOUT SAFETY BRAKE: Code 759 WITH SAFETY BRAKE: Code 757 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE Code 775 WITH SAFETY BRAKE Code 785 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n.125 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer soft treads Type – W WITHOUT SAFETY BRAKE: Code 430 WITH SAFETY BRAKE: Code 440 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 424 WITH SAFETY BRAKE: Code 647 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS: Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 200 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer with chromed die-cast zamak hood WHEELS: Reinforced copolymer hard treads Type – H WITHOUT SAFETY BRAKE: Code 457 WITH SAFETY BRAKE: Code 433 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 266 WITH SAFETY BRAKE: Code 462 BODY STANDARD SURFACE FINISH: Bright chromed Code 470 WHEELS STANDARD COLOUR: Black Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 200 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteEMILSIDER MECCANICA S.P.A.
Italy
BODY: Reinforced copolymer WHEELS: Reinforced copolymer soft tread Type – W WITHOUT SAFETY BRAKE: Code 770 WITH SAFETY BRAKE: Code 780 THESE CASTORS ARE AVAILABLE ALSO IN CONDUCTIVE VERSION WITHOUT SAFETY BRAKE: Code 767 WITH SAFETY BRAKE: Code 769 BODY STANDARD COLOUR: Black Code 440 WHEELS STANDARD COLOUR: Wheel centre black with dark grey tread Code 305 CONDUCTIVE CASTORS Wheels standard colour: Wheel centre black with black tread Code 310 daN 35 STANDARD PACKAGING: Cardboard box cm. 40x27x48 h. Content: n. 125 castors Plastic foil wrapped pallet holding 16 cardboard boxes cm. 120x80x110h
Request for a quoteResults for
Safety brakes - Import exportNumber of results
64 ProductsCountries
Company type