Rubber elastomers - Import export

In the cryogenic blasting process, an enrichment of rubber and plastic waste powder takes place due to fine abrasion during the treatment procedure. Thus the performance and processing time of the blasting-media will deteriorate and decrease its jet-energy. In our cryognic deflashing machines, the blasting-media is primary screened by the treatment drum perforation, however, after a long operating time the amount of rubber and plastic waste powder increases. In order to guarantee a constant, statistically secure and economic processing, this powder has to be removed periodically from the blasting-media. Our automatically working blasting-media recovery machine consists of a suction & drying system and a vibrating-screen unit. The used blasting-media has to be aspirated manually from the deflashing machine. The drying of the polluted wet and cold media takes place in the suction tank and the cleaning by screening with final separation into waste powder, waste media & re-usable media,

This high performance computer-controlled machine provides maximum economic efficiency at treatment of big batch volumes at high throughput! The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. At any time, this machine is ready for upgrade to automated application, from the automatic loading & deloading of the machine up to a complete full automated feeding & forwarding system. For industry 4.0 demands, the E90 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control via OPC-UA server is possible, too. Furthermore, this machine is able to perform cryogenic deburring without need of blasting media (drum-only deflashing), suitable for special applications only.

This high performance computer-controlled machine is the optimal solution for mid-sized batch demands at fast throughput times! The E 40 is, like any of our machines, designed for high performance at low consumption of nitrogen, blasting media and electric energy. The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. For industry 4.0 demands, the E40 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control OPC-UA server is possible, too. Furthermore, this machine is able to perform cryogenic deburring without need of blasting media (drum only deflashing), suitable for special applications only. mid-sized batches > fast throughput times > E40

This small sized computer controlled deflashing machine can be integrated into the production line easily. This saves temporary storage or extra transports and finally corresponding time loss and costs. The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. Alternatively the E30 is available with quick-exchange basket system. This basket is compatible to our high-pressure washing machine W30 and furthermore optimally suited for a linear in-line-processing →production →deflashing →washing →termpering, as this charge-baskets may be used compatible for each machine. For industry 4.0 demands, the E30 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control via OPC-UA server is possible.

This machine provides high efficiency cleaning of medical and technical elastomers and is construed for big sized batch demands at high throughput. The comfortable touchscreen panel allows a fast and easy operation of all parameters as well as administration of your washing recipes. Depending on water quality or rather cleanliness requirements, a treatment with de-ionized, de-mineralized or ultrapure water is possible by add-on module on option. For industry 4.0 demands, the W90 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. By special request, siliconisation of rubber parts or coating with other glide agents is additionally possible. The W90 offers maximum economic efficiency on treatment of big batch volumes at high throughput!

This machine offers high efficiency cleaning of medial & technical elastomers and is construed for mid sized bach demands. The W40 is, like any of our machines, designed for high performance with economic efficiency. The comfortable touchscreen panel allows a fast and easy operation of all parameters as well as administration of your washing recipes. Depending on water quality or rather cleanliness requirements, a treatment with de-ionized, de-mineralized or ultrapure water is possible by add-on module on option. For industry 4.0 demands, the W40 is best prepared. On option, the control of the machine via OPC-UA server can be installed additionally. By special request, siliconisation of rubber parts or coating with other glide agents is additionally possible. The W40 is the optimal solution for mid-sized batch demands at high througput!

This small-sized machine can be integrated into the production line easily. This safes temporary storage or extra transports and finally corresponding time loss and costs. The comfortable touchscreen panel allows a fast and easy operation of all parameters as well as administration of your washing recipes. Depending on water quality or rather cleanliness requirements, a treatment with de-ionized, de-mineralized or ultrapure water is possible by add-on module on option. By special request, siliconisation or coating with other glide agents is also possible. The W30 uses exchangeable bastekts for the (un)loading. These baskets are also compatible to our cryogenic deflashing machine E30W, and furthermore, optimally suited for a linear in-line processing → production → deflashing → washing → postcure tempering, The W30 is best pepared for industrie 4.0 demands. (on option with OPC UA server) With this small-sized machine, your treatment capacity is at best cost-performance ratio!

This automatic washing & drying system provides high efficient cleaning of elastomers in through-feed method (on option washing with de-ionized, de-mineralized or ultra-pure water possible). Starting from the loading station, the washing drums are conveyed automatically to each washing station (→ station pre-washing → station rinsing → station high pressure cleaning → station high pressure drying) and are finally conveyed to the unloading station after treatment. The dimensions of this system depend on the drum dimensions desired (perforation from 3 - 15 mm possible by choice). Set as our default, the models WD3, WD5 and WD9 are available with different sizes. For industry 4.0 demands, this system is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control of the machine via OPC-UA server can be installed additionally. Siliconisation or other coating of elastomers is possible on option.

We manufacture customer-specific molded parts made of rubber, silicone and elastomer composite parts in small and large series production according to your sample or drawing. Molded rubber parts are generally characterized by their good formability, chemical resistance, pressure and abrasion resistance and good electrical properties. We advise you in detail on the selection of the suitable material, with a view to the functional description, temperature resistance, chemical requirements, weather influences and resilience. Our molded parts are used in all industries, such as the automotive industry, medical technology, mechanical engineering and electronics industry. We offer customized parts: Protective covers for input devices, Rubber seals and rings, Grommets, flanges, bellows, Form Tubes, Rubber damper, PU molded parts (e.g. wheels and rollers) Combined rubber-metal parts / rubber-plastic parts, etc.

Siegling Extremultus live roller belts are energy-saving, durable components of driven live rollers. The quality and performance of the belts determine how quickly and reliably items our customers’ items are distributed. The belt’s tension member plays a key role in this process. Today’s standard is polyester fabric (E). But polyamide sheet (P) or aramide fabric (A) are also used. The tension member is embedded in a thermoplastic intermediate layer. Rubber elastomer or urethane coat the two friction layers, which are the top face of the belt (towards the roller) and the underside of the belt (towards the drive and in some cases to the idler roller). The combination of tension member and coating lends the belt its special characteristics – tailored to conveyor type and purpose. The splice requires no extra adhesives (in the Aramid and Polyester line) and can be made quickly, easily and cleanly on site.

Cost effective slab support with dimpled base for an ideal drainage of surface water. More than 60 versions available for different joint sizes and bond types. Choose VOLFI Basic Supports made from rubber-coated high performance elastomer for additional benefits.

Metal parts, steel grade 5.6. Elastomer, natural rubber, medium hardness, Shore 60. Version: Steel electro zinc-plated. Note: These machine feet have proven themselves to be universally applicable elements for the elastic support of all types of machine. They are commonly used wherever large horizontal movements are to be avoided. The horizontal rigidity is higher in all directions than the vertical rigidity. If used correctly they are excellent at preventing the transfer of vibration and noise. Machine feet with shear protection are available for situations where tensile forces are to be expected. The indicated load data are reference values for static loads by rubber hardness of Shore 60A. In contrast to those in the drawing, the holes D2 can also be elongated holes.

We produce expansion joints for all industrial sectors to take up vibrations, for noise absorption, or to compensate distortion by axial, lateral or angular movements. Our expansion joints are available in various versions and numerous elastomers variants in inner diameters from 25 mm to 1600 mm. Testing certificates of all well-known testing institutes are at hand. TYPE II Single or multiple flutes with rubber/fabric flange. Various elastomers qualities. ND 32 to ND 1600, Standard length n 250, 300 und 350 mm, Standard pressure stage 10 bar. TYPE V and TYPE VII Single wave with rubber sealing bead. Various elastomers qualities. ND 32 to ND 600. Standard pressure stage 10 bar. TYPE V Standard length 100 mm TYPE VII Standard length 130 mm HKS and HKA Per heating standard DIN 4809. COUPLING EXPANSION JOINT Single or multiple flutes, in various elastomers qualities. ND 25 – ND 750, any length for pressures from –0,8 to +15 bar, with clamping band. RUBBER-METAL PIPE...

100% ozone friendly solvent - meaning zero ODP. Excellent removal of greases, oils and flux residues and acrylic protective coatings from printed circuit boards (PCBs) Leaves a perfectly clean, dry surface – traditional solvents often leave it greasy. It is harmless to most plastics, rubbers, elastomers and surface coatings. NDD is compatible with a wide range of plastics.

Components in small volumes, replacement parts which are difficult to source or have even become obsolete, requirements and customer demands that fluctuate substantially (and are therefore effectively unplannable) All these are challenges in the day-to-day life of OEMs and TIER-X manufacturers in off-highway, commercial vehicles, mechanical engineering and many other industries when it comes to delivery performance towards end-customers. Our solution: for every case the most suitable manufacturing technology combined with our own experienced engineering team – everything from a single source. Technologies: Additive Manufacturing / 3D printing Casting Parts (sand casting, pressure casting and many more) CNC Parts Technical Plastics Parts Rubber and Elastomer Parts (gaskets) Assembly of Modules and Systems and many more

Electric horizontal machine, ultra compact for an optimized productivity! Suitable for the injection of many elastomers (rubber, silicones, etc.) Compact & ergonomic 33% smaller footprint compared to other presses on the market All features and production capacity in less than 4 meters length Productive & electric powered performance Productivity +20% 60% reduction in injection time 30% decrease in cure time Sustainable & Ecofriendly 50% power consumption 100% Water consumption 14% Waste reduction Oil free The “SmartWire” technology allows production to become autonomous and connected.

NEDEX secondary sealant MELTEX hotmelt butyl (hot melt sealant) is a 100% solids, single-component sealant designed for the sealed insulating glass industry. It is formulated from butyl rubber, synthetic polymers and elastomers to give outstanding adhesion to glass and aluminum when fabricated manually or reactivated in semi- automatic equipment. The product is resistant to degradation from ultraviolet light, temperature extremes and water immersion. MELTEX hotmelt butyl is is compatible with inner sealants of NEDEX such as KU-83B and PIB-996. They can be used together, there will be no chemical reactions. Before using MELTEX together with other inner sealants chemical compatibility tests should be done. MELTEX is a secondary sealant for Insulating Glass Unit with specifications according to EN 1279.

Single component injection moldings Shaping silicone to mold perfect injection parts – This is starlim//sterner's area of expertise. The term single-component injection molding describes the processing of the elastomer substance silicone rubber. This material is processed into small and miniature parts for the auto industry , the life science industry and for the manufacturing industry . Silicone is an elastomer substance with attractive properties. We process exclusively addition and high-temperature curing silicones. Here you find more information on the types of silicone used by starlim//sterner. We can combine your silicone component with a different material, too. Read more on our two component injection molding process. SHARE:

Material / Construction: Textile reinforced rubber with elastomer cover Temperature range:- 40 degrees to 100 degrees

At DLR Elastomer, we pride ourselves on offering a bespoke custom rubber moulding service, understanding application requirements, designing the parts, tooling & process to deliver the product to the clients’ exact and demanding performance needs. Our technical team is happy to advise on materials best suited for your application. Where necessary, we can modify the existing compound and/or develop new compounds keeping the service performance conditions of your product in mind. In addition, we monitor and apply current developments in polymer technology and we use this knowledge to develop even more advanced materials which will benefit our customers. Dlr Elastomer Engineering Rubber component design can be critical to its performance. We offer advice on all aspects of product design, helping to enhance performance & service life. Working from a sample, sketch or drawing, we can quickly select the materials required to provide a quotation for parts and associated tooling.

This talc is a fine powder formulated specifically for thermoplastics, thermoplastic elastomers and rubber. This talc allows manufacturers to significantly reduce the weight of materials and improve their rigidity at a lower density. It provides high cellular nucleation and increases cell density without compromising mechanical properties.

Warehousing and logistics have been our core business since 1977. Our service includes all things related to the storage, transloading, and handling of plastics (both granulate and regrind), rubber, elastomers, paper, phosphates, and animal nutrition. We also have a recycling department for the storage, transloading, and mechanical processing of both dangerous and non-dangerous solids. We do all our work with a strong focus on you, the customer: top-notch quality, a customer-oriented approach, and bend-over-backwards flexibility to effectively meet all your logistics challenges! Warehousing Management System (WMS): A crucial component for success Our warehouse management system is an indispensable link in our service chain. It adds significant value for our customers, who profit from optimal management information in every phase of the process, from transport and storage to handling and upgrading. We work with a proven, comprehensive WMS that not only gives us maximum control over ou

Politubes release liners for rubber and elastomer blends are designed to be used in the processing of rubber compounds and to roll up and separate coils of rubber waiting to be vulcanized. This separation service liner is used by tire producers as inner liner, side wall and rubber compounds separator. Main advantages are: •Excellent release qualities of the tire rubber thanks to its special embossed surface, preventing deformations •Optimal preservation of shapes and surfaces, without creases or deformation of the rubber •Reduction in machine downtime costs and related waste; this translates into an increase in productivity and a reduction of hidden production costs •High mechanical strength and tear resistance. •Superior ability to preserve the fresh rubber sheet. •Reduction in costs compared to products used for the same purpose, as it can be re-used 30-35 times more than conventional products. •Absence of any polluting substances, fraying or bagging •Less costs of disposal

Mainly used as a monomer unit for synthetic rubber, thermoplastic elastomer and other polymers or as raw materials for medicine, pesticide, spices etc. REACH registration certificate available.

For compounding and reactive process, JSW propose “TEX-αⅢ” series. TEX-αⅢ has the world’s highest level torque (Td = 18.2 Nm/cm3) with deeper Do/Di ratio (1.57). The highest torque of TEX-αⅢ makes it possible to operate the extruder with lower screw speed comparing with the existing extruder. As a result, TEX-αⅢ can realize the lower energy consumption and lower discharge temperature. TEX-αⅢ has 9 line-up from TEX25αⅢ(screw dia. 26.5 mm) to TEX120αⅢ (129.5 mm). For the isolation process after polymerization, we provide devolatilization extruder which has multi vacuum vent ports in order to remove residual solvent and/or monomer in the material polymers. JSW also provides the mechanical dewatering twin screw extruder for plastics, rubber and elastomer.

Elastomers are macro-molecular, organic substances with little cross-linked structure. As a result, they do not melt, are insoluble, partly subject to swelling and are elastic. Elastomers are based on rubber which is processed into various kinds of synthetic rubber, depending on the monomer. The various kinds of synchetic rubberdiffer slightlys in their properties so that they are used for different applications with regard to temperature, hardness, elasticity etc. In addition to generally common mouldings such as Orings, our delivery range also includes customized mouldedarticles, profi le cords, punched or cut seals manufactured to specifi cations or to drawings, plates or rollers. Elastomer materials: - NBR - EPDM - CR - CSM - FPM - VQM - NR - EPDM