Roller bearing lubrication - Import export

New concept! Maintenancefree track surface! Track surface doesn't require lubrication over long term use! IKO CLube Unit for Cam Followers is a lubrication part to mount into Cam Followers. Regular lubrication is not required as lubrication oil is supplied onto the outside diameter surface of the cam follower outer ring and track surface. Long term maintenance free track surface achieved.

As a tapped hole is prepared for the centralized piping on the stud head, this is optimal for applications where centralized oil piping is necessary.

These bearings consist of a cage made from a steel plate, which is precisely press formed and surfacehardened, and needle rollers with a diameter variation within 2μm. They have a rigid structure and a high lubricantretaining capacity. As they have the lowest sectional height compared with other thrust bearings, they can be used instead of conventional thrust washers and can withstand highspeed rotations with a low coefficient of friction.

Race body steel. Wipers plastic/felt. Longitudinal sealing lips rubber. Rollers steel 1.3505. Note Roller carriage with lifetimelubrication roller bearings and wipers which lubricate the system when moving. By simply moving the centre cam roller, the roller carriage can be adjusted so that it is free of play or has the desired pretension in the rail. High travel speeds up to 7 m/s and extremely quiet (faster and quieter than systems that use recirculating balls). The wipers are fitted with an oilsoaked felt. This felt is in constant contact with the track to ensure perfect lubrication. The felts can be recharged using an oil pump through the lubrication points on the front. On request Roller carriages with 4 or 5 rollers.

Lityum EP grease is yellow colored grease containing lithium soap, rust, oxidation, AW and high amount of EP additives and qualified mineral oils. It is especially intended for roller lubrication, however, also used in chassis lubrication processes. It is used in rollers, sliding bearings, central lubrication systems and general industrial applications. It is especially intended for roller lubrication, however, also used in chassis lubrication processes. • It reduces grease kinds and thus provides cost-savings in wide purpose applications of vehicle fleets and factories. • It provides high resistance against rusting and corrosion. • It provides operating performance between -20 °C and +130 °C. • It reduces abrasions and thus maintenance costs with the help of high amount of EP and high pressure additive it contains. • It forms tampon oil film in vibrating medium, and thus extends bearing’s life.

Lithium grease is yellow colored product containing lithium soap, rust, oxidation additives and qualified mineral oils. It has general purpose application areas. It can also be used in roller and chassis lubrication processes. It is used in rollers, sliding bearings, central lubrication systems and general industrial applications. It is especially intended for roller lubrication, however, also used in chassis lubrication processes. • It reduces grease kinds and thus provides cost-savings in wide purpose applications of vehicle fleets and factories. • It provides high resistance against rusting and corrosion. • It provides operating performance between -20 °C and +130 °C. • It reduces abrasions and thus maintenance costs with the help of high amount of EP high pressure additive it contains. • It forms tampon oil film in vibrating medium, and thus extends bearing’s life.

It is used in rollers, sliding bearings, central lubrication systems and general industrial applications. It is especially intended for roller lubrication, however, also used in chassis lubrication processes. • It reduces grease kinds and thus provides cost-savings in wide purpose applications of vehicle fleets and factories. • It provides high resistance against rusting and corrosion. • It provides operating performance between -20 °C and +130 °C. • It reduces abrasions and thus maintenance costs with the help of high amount of EP high pressure additive it contains. • It forms tampon oil film in vibrating medium, and thus extends bearing’s life

For lubrication points of all kinds as slide ways, spindles, geared parts of the electronic, precision engineering and optical equipment, temporarily or permanently exposed to extreme low temperatures like in arctic climates or cold storages Roller bearing lubrication of high-speed bearings, e.g. spindle bearings, miniature or precision bearings in machine-tools or textile machines, measuring equipment, electric motors of control technology and precision mechanics Advantages and benefits Dynamic light noise proofed long-term lubrication grease Best use at arctic conditions and very high speed High efficiency through optimal formulation Multifunctional application beside the regular range of performance for greases Efficient through economical application No nameable change of consistency at low temperatures or high speeds and accordingly temperatures

Arga Super EP 00, is a semi-fluid lithium soap automotive grease that is used in roller bearings, and sliding bearings, central lubrication systems and applications operating under high loads up to 120°C.

Grease lubrication of plain and roller bearings with low bearing play as well as bearings with low coasting moments Lubrication for fast-running roller bearings Sealing lubrication of mating surfaces, for example ground-in parts such as taper plugs, dosing plungers and valves Maintenance lubrication of plastic and rubber parts with embrittlement protection and good frictional characteristics, particularly on metal surfaces Advantages and benefits Temperature range from -60°C to 120°C Resistant to all alkali and acid cleaning agents and disinfectants Good wear protection through PTFE NSF H2 registration

Lubrication of highly stressed and relatively slowly running gears where due to leakage a grease must be used instead of oil For drives under high and shock load Chain lubrication of e.g. hollow pins, chains in the conveyor and transport field, under the influence of water and vapour and at higher operation temperatures Bearing lubrication of roller and plain bearings at annealing furnaces and drying equipments, manipulators and robots, conveyor and cooling systems, machines of preserve industry, steam sterilizers, etc. Advantages and benefits Best use in corrosive operation conditions with high operation temperatures and high pressure and shock load Economically due to optimum formulation Reduces wear and thereby downtime and enables long-term lubrication Ropy, strongly adhesive, temperature and water resistant, noise dampening, high-load and shock absorbing

The B80 KGK G1 series (with closed impeller) is a powerful and robust centrifugal submersible pump with plain bearings, drive lantern on roller bearings and IEC standard motor. The pumped liquid is conveyed from the tank via the radial pump outlet and the vertical riser pipe. Power is transmitted from the motor to the pump by means of a torsionally flexible, positive-locking coupling and is designed for continuous operation. * Suitable for flow rates up to 30 m³/h * equipped with a suction strainer as standard * suction pipe extension up to 2000 mm is possible * available in immersion depths from 500 - 4000 mm Features & advantages * No screws in contact with the medium * Vibration and oscillation-free operation * Long service life and operational reliability * Lifetime grease-lubricated roller bearings * Independent bearings for motor and pump * External flushing to protect the plain bearings with media containing solids

Lubrication of rolling bearings at operating temperatures of -50°C to +180°C For long-term lubrication of temperature-stressed electric motor bearings, e.g. in household appliances or of bearings which are to start up easily at low temperatures Initial lubrication of roller bearings, such as ball bearings that are open, closed on one side, or sealed off on both sides Advantages and benefits Broad range of uses outside normal grease performance areas Reduces wear and friction High resistance to oxidation Wide operating temperature range and good low-temperature properties Very good corrosion protection Very good compatibility with most plastics and elastomers

The B80 KGK G2 series (with open impeller) is a powerful and robust centrifugal submersible pump with plain bearings, drive lantern with roller bearings and IEC standard motor. The pumped liquid is conveyed from the tank via the radial pump outlet and the vertical riser pipe. Power is transmitted from the motor to the pump by means of a torsionally flexible, positive-locking coupling and is designed for continuous operation. *Suitable for flow rates up to 80 m³/h * equipped with a suction strainer as standard * suction pipe extension up to 2000 mm is possible * available in immersion depths from 500 - 4000 mm Features & advantages * No screws in contact with the medium * Vibration and oscillation-free operation * Long service life and operational reliability * Lifetime grease-lubricated roller bearings * Independent bearings for motor and pump * External flushing to protect the plain bearings with media containing solids

Special grease for the long-term lubrication of ball and plain bearings where electrical charge is possible, e.g. in electric engines, foil- stretching and foil-printing machines, etc. Advantages and benefits Long-term lubrication grease with a wide temperature range and good corrosion protection The special lubricating concept makes sure that electrostatic charges in roller bearing applications are destaticized through the grease, so that local discharges are avoided Proven especially for the lubrication of roller bearings below 1 ampere

Maintenance-Free Roller Bearings with Extended Service Life. Turmocomp HD 150 is a lubrication concept enabling effective lubrication of roller bearings even in complex operating conditions. The lubricating compound is a composition of molecular polymers and synthetic base oils. For applications in the food industry, H1-approved oils are being used. A subsequent heat treatment hardens the compound to a firm, open-porous matrix structure. It completely fills the bearing cavities and cannot be displaced easily. Due to its structure, a significantly greater amount of lubricant can be stored in comparison to conventional grease. This compound is suitable for almost any geometry of roller bearings. Turmocomp HD 150 is the perfect solution in applications where re-lubrication with conventional grease or oil is not possible or where bearing failures occur regularly after a very short time due to harsh operating conditions.

Rotary Hoes with 3 Wheels, Steel Rod, 6 Rollers, 110kg, 3 Grease Bearing of Lubricating,

These bearings are doublerow, full complement with a low cross sectional height designed for use in sheaves. There are two types, sealed and shield type. They can withstand heavy radial loads and shock loads at comparatively lowspeed rotations, and can also withstand axial loads. It is easy to fix them axially to sheaves using the stop rings of the outer ring. The width of the inner ring is designed to be larger than that of the outer ring, so they require no spacer between sheaves. The structure is stable because the doublerow of rollers can withstand the moment loads caused by rope transition. The surfaces of these bearings are also treated to provide high corrosion resistance.

IKO Roller Bearings are heavy duty bearings with rollers incorporated in a double row. They are nonseparable bearings with a high load rating. They can withstand not only radial loads but axial loads as well, which are supported at the contacts between the shoulders of the inner and outer rings and the end faces of the rollers. They should be used at the fixing side of a shaft. Like needle roller bearings, they are also compact. Roller bearing types include caged, full complement and the type for sheaves, and they can be selected based on the operating conditions. These bearings are used in heavyduty machinery such as construction equipment, and industrial machines.

A lever clamping permits a simple, fast and exact adjusting of different working levels, without any efforts to adapt the devices. The swivel unit is available for the rotary tables RT2A075, RT2A100, RT2A150 und RT2A200. Field of applications: Assembly technologies, measuring and testing equipments, laser writing, welding, cutting, as well as special mechanical engineering. Features (RT2A100, RT2A200): Individually adjustable swiveling range from -5° to +95°. Fixed stop iin the 0° and 90°. Other positions possible by customer request. Clamp and locking effect through laterally installed, adjustable clamping lever. On one side appropriate scaling in 1° steps. Fixing of the swivel unit through four countersinking holes in the base plate.

Rotary tables with direct drive series RT3 The rotary tables with direct drive are available in different types: RT3A100x100, RT3A100x155, RT3A080x130, RT3A150x100, RT3A150x130, RT3A250x170, RT3A200x060 und RT3G630x225 Rotary tables RT3G630 – high dynamics, high precision, high loading capacity This direct driven rotary table RT3G630 has particularly been developed for machine tool industry and assembly machines. It is characterised by its high precision, highdynamics and its high loading capacity. The rotary table is driven by a permanently excited 3-phase synchronous motor. The rotary plate and the housing are made of gray cast iron.

While the conventional drives are dependent on an external controller unit, for the compact drives no additional controller is needed. The complete electrical parts, including the drive controller and encoder, are integrated on the motor board. Programming is done via standard PC using free software. The operation can be done without a PC, the created driving programs are stored in the compact drive and can be accessed via a separate input. Compact design Integrated motor controller and encoder RS485 or CANopen Interface Operating modes: positioning, speed, flag-position, clockdirection, analog, analog position, torque Position monitoring with automatic error correction up to 0,9° Step resolution max. 1/64 Integrated temperature monitoring Step frequency 0-50 kHz at clock-direction-mode and 0-25 kHz at the other modes

The series of RT2A distinguishes by compact design with integrated precision roller bearing and worm drive. The rotary tables are sealed, IP 50 and can be driven in all fitted positions. For the mounting, standard drilling plans and special mounting flange and clamps can be used. Different limit switches are available: Standard: reference impulse, PNP-NC, 2 channel.

This multisided applicable precision rotary table is available in installation size of 300 mm of rotary plate diameter. The rotation plate is stored by a tempered roller-bearing. This enabled high moment rigidity within the radial and axial range as well as free positioning at less friction moments. The drive takes place alternatively via stepper- or AC servomotors by a hardened and polished precision worm with a worm wheel of bronze. The rotary table is horizontal and vertically applicable by standard drilling plan and bolting face.

The new designed rotary swivel unit RT2A is the ideal solution for retrofitting your machine with a 4th and 5th axis. It is based on the proven and robust rotary tables of the RT2A series. The design is kept very compact to ensure the best possible use of space with high load capacity. The rotary tables are equipped with an integrated precision roller bearing, which ensures high torque capacity, radial and axial run-out accuracy. The rotary swivel unit RT2A is available in the size variants RT2A150/200 and RT2A100/150. Various stepper or servo motors can be used as drives. In addition, various types of end or reference point switches are available. The swivel range of the swivel axis can be individually defined, the rotary axis can be rotated without limit. Thus the RT2A rotary swivel unit combines all the advantages of a field-proven standard product with the flexibility of a special version.

Franke bearing asseblies type LVG are bearing assemblies made of aluminum, designed as double row angular contact roller bearings with integrated bearing elements. LVG bearing assemblies are suitable for the highest load ratings. They convince by high rigidity, low rotational resistance and low weight. Designed as roller bearings, they can support high loads from all directions and are insensitive to shocks and vibrations. Franke LVG are sealed on both sides and are set with preload. By using aluminum, Franke beaing assemblies type LVG are 60% lighter than comparable steel bearings.

Non-standard Nylon Bearing, Special Bearing, Bearing, Nylon Bearing

Roller Bearings, Bearings

Beader tooling can be manufactured for any machine, such as CEVOLANI, FMI, SIGKRUPP, Soudronic and more.