Reduction - Import export

Reduction made of polyamide for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -40 °C / + 100 °C — Protection grade dependent on the combination with other components

Reduction made of nickel-plated brass for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -60 °C / + 200 °C — Protection grade dependent on the combination with other components

Effective NOx reduction systems offered by INSTAL-FILTER SA are combination of proven technologies based on long-term experiences and innovative technology. They are characterized by low cost consumption and great availability. To meet the binding law, INSTAL-FILTER SA offers the following NOx technologies: --> SNCR Selective, non-catalytic reduction method applied in high fumes temperatures of gases 850 – 1080 °C --> SCR Selective, catalytic reduction method applied in low temperatures of gases 180 – 470 °C --> COMBINED METHOD Combination of SNCR and SCR methods As an agent, which reduces the NOx, there are applied: --> Urea - (NH2) 2CO --> Ammonia - NH3 --> Ammonia water - NH4OH Taking economic aspect into accounts it is important to reduce the NOx level also on the grounds of primary methods.

SAMSYS offers Spindle Liner for draw tube diameters from 38mm to 100mm. The length of the reduction tube depends on the length of the draw tube, as well as the clamping device and the type of clamping cylinder. The reduction tube consists of a precision steel tube as support tube (1). In order to ensure optimum guidance, the rear (2) and the front (3) guide are adapted to the lathe. Mounting as well as dismounting can be done in a very short time with a few simple steps, as the reduction tube is only attached to the clamping cylinder with two screws. The POM bushings (4) can be flexibly adapted to the material diameter. Since you do not need to store a reduction tube for every diameter, you save valuable storage space. A Water pan extension (5) is also available as an option for safe covering and splash protection.

What you can expect from APROVIS silencers: - Standard versions for selected engines - Individual design and construction for every application - Assured sound reduction even with high requirements - Cost- and installation space-optimised design that makes use of the pressure drop

What you can expect from APROVIS oxidation and three-way catalytic converters: - Individual design for each specific application - Also special production for special applications - Short delivery times - Compliance with the limits over the warranty period - Use of soldered metal supports to withstand high thermal and mechanical loads - No telescoping of the catalytic converter elements

What you can expect from APROVIS SCR catalytic converters: - SCR housing with insulation - Optimised design of the catalytic converter honeycombs - Injection section with static mixers - Daily service tank - Dosing station for exact dosing of the reducing agent - Continuous measurement of nitrogen oxides (NOx) - Controlled urea injection at measured NOx values - High conversion rate and long service life

ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These economical pumps need no lubrication and no daytoday maintenance. A unique design allows parts to adjust automatically for wear. Highest efficiency is maintained for a very long time. Installation is simple as no chain or belt drives or gear reduction motors are required. Pumps can be directly connected to standard speed lowcost electric motors. By simply changing the shaft rotation, pumps can be used to pump in or out through the same piping.

Dr. Paul Lohmann® offers LomaSalt 2.0 Basis as crystalline powder in food grade. Compared to conventional table salt, LomaSalt® contains 50 % less sodium and is therefore used to reduce the sodium content in nutrition.

Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction)

Whitening Complex Intensive Care Reduction of discoloration hand and body cream SPF 15 An effective hand and body cream that lightens discolorations: hormonal, post-inflammatory, sun, and age-related. Neuropeptide from Sand Lily in combination with vitamin C evens out the skin tone – reduces and brightens pigmentation spots, prevents the formation of new ones, blocks the synthesis and secretion of melanin. Sunscreens provide immediate protection against UV radiation. Shea butter creates a protective barrier, and the composition of natural oils regenerates the hydrolipid coat of the skin. As a result, the skin becomes soft, smooth and nourished.

Novelis Fusion™ 6HF – e200 is a heat treatable product for applications with extremely demanding formability requirements. This product is recommended for outer applications such as body sides and decklid outers. This product has an excellent balance of properties for forming and strength. In addition, it offers a unique advantage in the hemming process enabling sharp feature lines and rope hem designs that permit the reduction in perceived gap between adjacent panels. All values are typical.

As one of the largest independent contract manufacturers in Germany, the Pritzwalk gear factory based in Brandenburg undertakes the following production: Ring gears, gears, planetary gears, sun gears and shafts with internal gearing. Due to our generous outdoor storage area, ZWP can store the raw material for long-term procurement projects. This means that there are no lead times for special materials, so that a waiting time of e.g. 3-6 months can be avoided. Immediate access to materials is possible and production can take place immediately. The rising raw material prices, long waiting times or availability of the material used make warehousing and production according to defined lot sizes interesting again. Delivery call-offs can be made with immediate delivery capability and cost savings. Finished parts are of course preserved inside. We are looking for a conversation with you for a holistic solution.

The B70V SanitaryPlus food pump is a powerful positive displacement pump for highly sensitive, viscous media with and without fibres or solids up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packs. The pump fulfils the requirements of hygienic design and is certified in accordance with the "3-A Sanitary Standards". With reduction gear for electric motors up to 230 volts * Also available in special immersion depths * Examples of media: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products * Threadless, manually detachable quick connections in the wetted area * Gentle, low-pulsation product conveyance * Certified and approved in accordance with the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10"

The eccentric worm-drive pump B70V-SR (with reduction gear) in PURE design is suitable for pumping water-like to highly viscous media with and without fibres or solids. Depending on the application, various electric and compressed air motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Also available in special immersion depths * Examples of media: viscous cosmetic products, foodstuffs, etc. * Uniform volume flow * Gentle, low-pulsation product conveyance * Low wear and tear * Ideal for mobile use * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2

Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use

AUTONOX - CTP's regnerative SCR system. The perfect CTP solution for the reduction of NOx. A special feature about the CTP AutoNOx is the fact that it can be adapted to meet a wide variety of special customer requirements: Innovative SCR concept Highest thermal efficiency Highest flexibility Possibility for extension

Silicon nitride magnetic rings are mainly used to protect high voltage electrodes and are widely used in the photovoltaic industry.Heat shields and magnetic rings, as well as ceramic rings, are collectively referred to as electrode shields.Silicon nitride electrode protection cover mainly uses silicon nitride insulation, heat resistance and corrosion resistance.Compared with the protective cover of quartz and alumina which is still in use today, the service life of the silicon nitride electrode shield is more than 10 times, and it will not be electrically broken down during use, and will not be heated, nor will it be heated. Will be eroded away. Due to its own stability, in the use of photovoltaic reduction furnaces, the collapse rate of non-human factors is greatly reduced. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

- metal mount - for permanent mounting of the screen under the worktop - paint color is agreed upon additionally - for screens with a length of 600-1400 mm, 2 pieces are required - for screens with a length of 1600-1800 mm, 3 pieces are required Dimension, mm 130x50х250 Н

- available in several color combinations - minimalist design - adapting the office to different work scenarios - eco-friendly material made of recycled plastic bottles Material Acoustic panel RE:QUIET, thickness 9mm Rope fastening system Dimension, mm 1520х20х2250 Н Weight 7,0 kg

All steel fitting products up to the diameter 48” in accordance with the standard TS EN 448 and fittings of other pipe types as special production can be manufactured as pre-insulated fittings.

3/4″ x 1/2″ 1″ x 1/2″ 1″ x 3/4″ 5/4″ x 1/2″ 5/4″ x 3/4″ 5/4″ x 1″ 6/4″ x 1/2″ 6/4″ x 3/4″ 6/4″ x 1″ 6/4″ x 5/4″ 2″ x 1/2″ 2″ x 3/4″ 2″ x 1″ 2″ x 5/4″ 2″ x 6/4″ 2 1/2″ x 2″

DN 20 x DN 15 (G1″M x G3/4″F) DN 25 x DN 20 (G5/4″M x G1″F) DN 32 x DN 25 (G6/4″M x G5/4″F) DN 40 x DN 25 (G2″M x G5/4″F) DN 40 x DN 32 (G2″M x G6/4″F)

We offer planetary gearboxes with varied backlash degrees such as normal (only needs torque output), precision (max backlash 13 or 15 arcmins), high precision (max backlash 8 or 9 arcmins), and super-high precision (max backlash 4 or 5 arcmins).

Barriersorba sound reduction sheet is made of high density synthetic thermoplastic polymer mat loaded with naturally occurring minerals. The product is free of lead, unrefined oils and bitumen. It s black/dark grey in colour and the product is recyclable which makes it very eco friendly. Designed to improve the sound reduction performance of walls, floors, ceilings, enclosure constructions, either as a single sound barrier such as a noise curtain, or part of a composite combined with mass and/or sound absorbing materials. Acoustic Performance Installation Barriersorba sheet used to reduce noise transmission across ceiling and floor voids. Barriersorba sheets are flexible and can be hung as noise barrier sheets between ceiling soffits and suspended ceilings to reduce sound transmission between adjacent areas to elevate room to room sound problems via a common ceiling voids. As Barriersorba sheet is quick and simple to install, it can be used in new build as well as refurbishment....

Do you have highly precise and very sensitive equipment, such as a microscope, an inspection device, an imaging system or a polishing machine and is the use of an active or passive isolation platform , insufficient? It may be that local/global resonances are degrading the performance of the isolation system, because it is not stiff enough or because perturbation sources are located on the isolated part. In such a case, our Active Damping Devices provide a solution by introducing structural damping into most of the unwanted mechanical resonances. Up to 15% structural damping can be achieved, without any major redesign effort. Compared to passive dampers, the ADD are lighter and not sensitive to changes in the supporting structure dynamics.Structural vibration reduction of isolated machines for performance improvement (microlithography, microscope, chip manufacturing or inspection machines, etc.)

The TYC2RT compression press allows the production of rubber mouldings with compression moulding or vacuum compression. The twoplate in/out with 45° inclination of the upper plate is suitable for various options. They are particularly suitable for moulding Orings, pharmaceutical stoppers, syringe plungers, and many other rubber parts. They are available in 2RT or 3RT series depending on the number of plates in the mould. Equipped with a 4post clamping system with high precision parallelism, their adjustable opening stroke allows different mould heights. The vacuum bell system reduces the curing time, thus increasing productivity.