Reduction - Import export

Reduction made of nickel-plated brass for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -60 °C / + 200 °C — Protection grade dependent on the combination with other components

Reduction made of polyamide for the reduction of threaded or clearance holes to smaller thread sizes. Features: — Temperature range -40 °C / + 100 °C — Protection grade dependent on the combination with other components

SAMSYS offers Spindle Liner for draw tube diameters from 38mm to 100mm. The length of the reduction tube depends on the length of the draw tube, as well as the clamping device and the type of clamping cylinder. The reduction tube consists of a precision steel tube as support tube (1). In order to ensure optimum guidance, the rear (2) and the front (3) guide are adapted to the lathe. Mounting as well as dismounting can be done in a very short time with a few simple steps, as the reduction tube is only attached to the clamping cylinder with two screws. The POM bushings (4) can be flexibly adapted to the material diameter. Since you do not need to store a reduction tube for every diameter, you save valuable storage space. A Water pan extension (5) is also available as an option for safe covering and splash protection.

What you can expect from APROVIS silencers: - Standard versions for selected engines - Individual design and construction for every application - Assured sound reduction even with high requirements - Cost- and installation space-optimised design that makes use of the pressure drop

What you can expect from APROVIS oxidation and three-way catalytic converters: - Individual design for each specific application - Also special production for special applications - Short delivery times - Compliance with the limits over the warranty period - Use of soldered metal supports to withstand high thermal and mechanical loads - No telescoping of the catalytic converter elements

What you can expect from APROVIS SCR catalytic converters: - SCR housing with insulation - Optimised design of the catalytic converter honeycombs - Injection section with static mixers - Daily service tank - Dosing station for exact dosing of the reducing agent - Continuous measurement of nitrogen oxides (NOx) - Controlled urea injection at measured NOx values - High conversion rate and long service life

Dr. Paul Lohmann® offers LomaSalt 2.0 Basis as crystalline powder in food grade. Compared to conventional table salt, LomaSalt® contains 50 % less sodium and is therefore used to reduce the sodium content in nutrition.

Novelis Fusion™ 6HF – e200 is a heat treatable product for applications with extremely demanding formability requirements. This product is recommended for outer applications such as body sides and decklid outers. This product has an excellent balance of properties for forming and strength. In addition, it offers a unique advantage in the hemming process enabling sharp feature lines and rope hem designs that permit the reduction in perceived gap between adjacent panels. All values are typical.

As one of the largest independent contract manufacturers in Germany, the Pritzwalk gear factory based in Brandenburg undertakes the following production: Ring gears, gears, planetary gears, sun gears and shafts with internal gearing. Due to our generous outdoor storage area, ZWP can store the raw material for long-term procurement projects. This means that there are no lead times for special materials, so that a waiting time of e.g. 3-6 months can be avoided. Immediate access to materials is possible and production can take place immediately. The rising raw material prices, long waiting times or availability of the material used make warehousing and production according to defined lot sizes interesting again. Delivery call-offs can be made with immediate delivery capability and cost savings. Finished parts are of course preserved inside. We are looking for a conversation with you for a holistic solution.

The B70V SanitaryPlus food pump is a powerful positive displacement pump for highly sensitive, viscous media with and without fibres or solids up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packs. The pump fulfils the requirements of hygienic design and is certified in accordance with the "3-A Sanitary Standards". With reduction gear for electric motors up to 230 volts * Also available in special immersion depths * Examples of media: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products * Threadless, manually detachable quick connections in the wetted area * Gentle, low-pulsation product conveyance * Certified and approved in accordance with the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10"

The eccentric worm-drive pump B70V-SR (with reduction gear) in PURE design is suitable for pumping water-like to highly viscous media with and without fibres or solids. Depending on the application, various electric and compressed air motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Also available in special immersion depths * Examples of media: viscous cosmetic products, foodstuffs, etc. * Uniform volume flow * Gentle, low-pulsation product conveyance * Low wear and tear * Ideal for mobile use * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2

Eccentric screw pump tube B70V-SR Industrywith reduction gear for electric motors For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator. The Eccentric screw pump B70V-SR 12.1 (with reduction gear) in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources. * PTO shaft versions also available in special immersion depths of 500 - 2000 mm * Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials * Uniform volume flow * Easy and fast cleaning * Gentle, low-pulsation product delivery * Low wear * Ideal for mobile use

The blind rivet nut Light Weight saves up to 50% weight by optimizing the material and design! Customer benefits: • Reduced space requirement on the closing head side • Fast processing • Process monitoring and process control are possible • Independent of surface properties • Accessibility from one side • Mechanical strength properties identical to conventional blind rivet nut • No third party materials (e.g. adhesive) required

- Reduced friction - Reduced fuel consumption - Reduced wear on parts THE EFFECT Friction leads to wear and increases fuel consumption. ERC Gear Oil Power Additive is highly effective at reducing friction and wear by laying flake-like MoS2 particles on the metal surface; the particles then smoothly slide over each other on their parallel surfaces, reducing wear on the metal parts. Additional polymers add to the low-friction dynamics. THE ADVANTAGES AT A GLANCE: - Special product with MoS2 low friction formula - Highly effective at reducing friction and wear - Decreases fuel consumption - Decreases frequency of repairs - Ensures easy gear change and noise reduction - Increases endurance of the gearbox oil base and enhances dry-running properties

Your benefits Better fuel quality for combustion Blend fuel improvement Prevent sludge in case of fuel incompatibility Increases amount of burnable fuel Less wear and tear on engine components Optimization of combustion process Fuel treatment / conditioning Less clogged filters Areas of application The Homogenizer is a dynamic milling machine which can be used in the fuel system on board ships. It is designed to improve your fuel quality which will lead to a better combustion and less maintenance. Furthermore it can reduce sludge in case of fuel incompatibility. Increase the amount of burnable fuel in case of bad fuel quality. The Homogenizer has a high saving potential.

Our cable protection program for noise reduction / vibration protection impresses with its high flexibility and high mechanical strength. It enables fast cable pulling and reliable protection of the cable in areas with strong vibrations. The corresponding, wide range of accessories can also be found in our product portfolio.

Desk partition in solid colors: Design your own modern, high-quality and functional partition to match your corporate design. For better room acoustics! Sound absorber class A and fire protection class B1! - Sound absorber class A according to DIN EN ISO 11654 - high-performance absorber - Fire protection class B1 according to DIN 4102 - Desk partition 40 cm high: Brilliant textile print can be replaced quickly and easily - Select format or request your format - 44 mm construction depth of the sound absorbers - Digital textile printing environmentally friendly with water-based inks - Acoustic material Öko-TEX® 100 certified,100% recyclable - Acoustic fleece: high-performance absorber or sound absorber - Colours: light grey (Pantone 420 EC), dark grey (Pantone 424 EC), steel construction (Pantone 644 EC), light green (Pantone 366 EC), beige (Pantone 7500 EC), light "mud" (Pantone 7535 EC), orange (Pantone 165 EC)

Reduction Sleeves with Flange for MAZAK

Collet Reduction Sleeves with Cap Nut UF

Collet Reduction Sleeves with Standard Nut

Reduction Sleeves with Flange for MORI SEIKI

Reduction Sleeves with Flange for INDEX

Reduction Sleeves with Flange

Collet Reduction Sleeves for Collets Type 600