Quick connection - Import export

Our 3E inlay connector can be directly fastened to existing fittings with DIN 8063 male threads and is immediately ready for use with both flexible tubes and pipes. The inlay component of the 3E connector is manufactured as one piece with the connector integrated. This saves not only time and work, it helps to ensure that the connector is tight and thus safe to use.

Goodridge G-Link quick disconnect couplings (otherwise known as dry-breaks) are a lightweight coupling that can be disconnected and reconnected by hand/ lanyard in seconds; without the need to re-bleed the system. Perfect for brake lines, fuel lines, oil lines and pneumatics. There are two types of G-Link available, ‘bayonet’ and ‘pull type'; with a range of seals to suit different applications.

Pogo connectors are used for charging purposes or for signal transmission between detachable devices or within products.

Use: Built-in couplings for assembly with panel kits into complete miniature panels. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Single built-in sockets for installation in front plates, measuring device housings, etc. Attachment with two screws M 2.5. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.

Application: Panel insert for thermocouple and RTD citcuits. Mounting by means of a stainless steel bracket and two screws. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different pin thicknesses. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

GLOBUS Quick-fit ball float valve made of pressed brass, complete with inlet pipe and quick-fit connection. The chemical nickel plating of the components provides corrosion protection for all valves.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. The third contact for ground or continuous shield or for three wire RTD´s. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

Use: Panel insert for thermocouple and RTD circuits. Mounting by means of stainless steel bracket and two screws or with a stainless steel clip-spring. Ideal panelinsert for instrument cases. Mechanical design: Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.

Use: Built-in couplings for assembly with panel kits into complete miniature panels. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP- and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Conductor guides for prevention of short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Single built-in couplings for installation in front plates, housings, etc. Attachment with two screws M 2.5. Third connection for ground or continuous shield or three wire RTD. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Tube clamps are best suited for a quick and safe connection of two tubes that can be plugged into one another.

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Jab-in cover allow easy connection without need cover removal. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Panel insert for thermocouple and RTD circuits. Designed to used together with panel sets for assembly to complete standard panels. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different pin thicknesses. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous media with and without fiber or solids content up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packages. The pump meets the requirements of hygienic design and is certified according to the "3-A Sanitary Standards". * also available in special immersion depths * equipped as standard with a carrying handle and a Motor * Media examples: liquid foodstuffs and semi-luxury foods, pharmaceutical agents and cosmetic products Features & Benefits * Threadless, manually releasable quick connections in the wetted area * Quick and easy disassembly * Simple and fast cleaning * Gentle, low-pulsation product conveying * Certified and approved according to the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10".

The B70V SanitaryPlus food pump is a powerful positive displacement pump for highly sensitive, viscous media with and without fibres or solids up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packs. The pump fulfils the requirements of hygienic design and is certified in accordance with the "3-A Sanitary Standards". With reduction gear for electric motors up to 230 volts * Also available in special immersion depths * Examples of media: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products * Threadless, manually detachable quick connections in the wetted area * Gentle, low-pulsation product conveyance * Certified and approved in accordance with the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10"

PU timing belts with easy joint as strong as a welded joint The easy joint timing belt fastener is the perfect solution, for a quick and easy mechanical endless connection of PU timing belts. Assemble without disassembling, without stopping your production line Replace your belts in few minutes without disassemble your hoods, pulleys, axis. Reduce your production downtimes. The method of mechanical assembly and fastening system easy joint offers unique solutions for easy and fast repairs of power transmission belts or conveyor belts. Pitches: H / T10 / AT10 / T20 / AT20 / 8M / 14M Standard: Polyurethane 90° Shore A grey Versions: Standard, PAZ, PAR Cords: reinforced with a Polymercord around the Pin in each tooth joint, arranged in parallel Width: from 10 to 150mm, (wide belts possible on request)

Hollow core belts for nipple connections when quick and easy installation is needed. Standard stock program: 75° Sh.A red, smooth 80° Sh.A sky-blue, smooth, FDA 85° Sh.A green, smooth Available diameters: 4.8mm - 15mm Available lengths: starting from 110mm Available hardness: 75° Sh.A – 85° Sh.D Temperature resistance: -30°C - +70°C Coefficient of friction: 0.3µ - 0.7µ

Foam spray systems, for direct connection to high pressure washing equipment, for dense, highly effective foam without the need for separate low pressure equipment. Foam lances with and without quick coupling, for quick and efficient connection to the high pressure machine via the rear segment of the gun. Double lance system with injector and stainless steel dosing valve, which allows, using the same equipment connected to high pressure, spraying foam with one lance and rinsing at high pressure with the other lance.

[Easy to use] The lergth of hose is 19", come with clear gauge for viewing. R-134a quick coupler can oe easily connected to the R-12 / R-22 1/4" SAE port side. Perfectly fit for R-134a, R-12, and R-22 refrigerant. [Applicaoility] BPV-31 Pullet piercing valve compatiPle with 3 different sizes of tuDing: 1/4", 5/16', 3/8* (outside diameter pipes). The gauge with 3 type scale readings for R134, R12 and R22. [High Quality] Made of corrosion-resistant metal and the hose adopted quality ruooer material, high pressure resistance and sturdy [Repalcement Part] AP4502525, BPV31D, MPV31, GPV14, GPV31, GPV38. GPV56 [Package including] 1 x charging hose with gauge. 1 x r134a low skje quick coupler, and 3PV-31 piercinq tap valve kits (1 x piercinq valve, 1 x hex key and 2

LumiLife are one of the leading names in LED trade lighting, offering a range of products including LED panels, tube lights, floodlights and downlights that are designed to provide long-lasting illumination while helping customers save on energy costs. For indivudual product details please see below the product description which includes a downloadable product data sheet. Reduce installation time with the new 3P push-in terminal block, also known as 'quick connector'. With the new and updated GU10 fitting, the quick connector is included to make installation even easier. The connector gives you easy access with large terminals and fast connection. Cut-out: 85mm 30º Tilt (one direction) Part B (Fire Safety) Part C (Resistance to Moisture) Part E (Resistance to Sound) compliant