Quick connection - Import export

Our 3E inlay connector can be directly fastened to existing fittings with DIN 8063 male threads and is immediately ready for use with both flexible tubes and pipes. The inlay component of the 3E connector is manufactured as one piece with the connector integrated. This saves not only time and work, it helps to ensure that the connector is tight and thus safe to use.

Goodridge G-Link quick disconnect couplings (otherwise known as dry-breaks) are a lightweight coupling that can be disconnected and reconnected by hand/ lanyard in seconds; without the need to re-bleed the system. Perfect for brake lines, fuel lines, oil lines and pneumatics. There are two types of G-Link available, ‘bayonet’ and ‘pull type'; with a range of seals to suit different applications.

Pogo connectors are used for charging purposes or for signal transmission between detachable devices or within products.

Application: Panel insert for thermocouple and RTD citcuits. Mounting by means of a stainless steel bracket and two screws. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different pin thicknesses. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Built-in couplings for assembly with panel kits into complete miniature panels. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Single built-in sockets for installation in front plates, measuring device housings, etc. Attachment with two screws M 2.5. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.

GLOBUS Quick-fit ball float valve made of pressed brass, complete with inlet pipe and quick-fit connection. The chemical nickel plating of the components provides corrosion protection for all valves.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. The third contact for ground or continuous shield or for three wire RTD´s. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Panel insert for thermocouple and RTD circuits. Designed to used together with panel sets for assembly to complete standard panels. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different pin thicknesses. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Jab-in cover allow easy connection without need cover removal. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Panel insert for thermocouple and RTD circuits. Mounting by means of stainless steel bracket and two screws or with a stainless steel clip-spring. Ideal panelinsert for instrument cases. Mechanical design: Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.

Use: Built-in couplings for assembly with panel kits into complete miniature panels. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP- and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Conductor guides for prevention of short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Single built-in couplings for installation in front plates, housings, etc. Attachment with two screws M 2.5. Third connection for ground or continuous shield or three wire RTD. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.

Tube clamps are best suited for a quick and safe connection of two tubes that can be plugged into one another.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous media with and without fiber or solids content up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packages. The pump meets the requirements of hygienic design and is certified according to the "3-A Sanitary Standards". * also available in special immersion depths * equipped as standard with a carrying handle and a Motor * Media examples: liquid foodstuffs and semi-luxury foods, pharmaceutical agents and cosmetic products Features & Benefits * Threadless, manually releasable quick connections in the wetted area * Quick and easy disassembly * Simple and fast cleaning * Gentle, low-pulsation product conveying * Certified and approved according to the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10".

The B70V SanitaryPlus food pump is a powerful positive displacement pump for highly sensitive, viscous media with and without fibres or solids up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packs. The pump fulfils the requirements of hygienic design and is certified in accordance with the "3-A Sanitary Standards". With reduction gear for electric motors up to 230 volts * Also available in special immersion depths * Examples of media: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products * Threadless, manually detachable quick connections in the wetted area * Gentle, low-pulsation product conveyance * Certified and approved in accordance with the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10"

PU timing belts with easy joint as strong as a welded joint The easy joint timing belt fastener is the perfect solution, for a quick and easy mechanical endless connection of PU timing belts. Assemble without disassembling, without stopping your production line Replace your belts in few minutes without disassemble your hoods, pulleys, axis. Reduce your production downtimes. The method of mechanical assembly and fastening system easy joint offers unique solutions for easy and fast repairs of power transmission belts or conveyor belts. Pitches: H / T10 / AT10 / T20 / AT20 / 8M / 14M Standard: Polyurethane 90° Shore A grey Versions: Standard, PAZ, PAR Cords: reinforced with a Polymercord around the Pin in each tooth joint, arranged in parallel Width: from 10 to 150mm, (wide belts possible on request)

Hollow core belts for nipple connections when quick and easy installation is needed. Standard stock program: 75° Sh.A red, smooth 80° Sh.A sky-blue, smooth, FDA 85° Sh.A green, smooth Available diameters: 4.8mm - 15mm Available lengths: starting from 110mm Available hardness: 75° Sh.A – 85° Sh.D Temperature resistance: -30°C - +70°C Coefficient of friction: 0.3µ - 0.7µ

The Jacob Cable Joint is ideal for quickly and safely connecting two cables. • flexible to use and reuse multiple times • robust design for use in harsh environment conditions • connection CAGE CLAMP®, WAGO Inline splicing technology with lever, approved as per EN 60998-2-2 and UL 486C • Rated voltage 450 V • Rated current 32 A • Conductor material Copper • Conductor solid and fine stranded conductor 0,2 - 4 mm², • Type and cross stranded conductor 0,2 - 2,5 mm² • Temperature range -25 °C / +85 °C • Protection grade IP68

The 501/RCG can be used for quick field connection of cables to equipment where historically hard wiring methods are used. This solution offers cost savings when carrying out essential inspectionand maintenance activities, including the capability to quickly swap out equipment on-site. Material: Nickel-plated brass Types of Protection: Ex II 2 GD, Ex eb IIC T6/T5 Gb, Ex tb IIIC T80°C/95°C Db Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. 4 or 6 Pins Cross section from 0,75 to 6,0 mm² Maximum voltage 300VAC/212 VDC Maximum power dependent on conductor size, max. 30 Ampère Temperature range: -60 °C / +60 °C Protection grades IP66, IP67, Deluge Protected DTS01

Is testing of large industrial hose or long hydraulic hose possible in a safe and practical manner? Our new P 350 test bench unifies our years of experience with your advanced requirements for special hose equipment. The extra-large test chamber gives you the space you need for your challenge. Pallets with hoses as well as large, heavy hose coils can be easily supplied to the chamber by forklift. Hose samples are connected easily with adapter hose and quick connection to pressure ports. The P 350 comes with a number of standard features such as internal lighting and a portable power aggregate, and caters to individual test logging.