Results for
KENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way Proportional Valve Type 68P with 15 mm width and two different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way proportional valves, 10 mm width, three different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way proportional valves, 10 mm width, three different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way proportional valves, 15 mm width, two different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way proportional valves, 15 mm width, two different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision
Request for a quoteSTAIGER
Germany
Proportional regulation and control of high flow rates • Frictionless movement; • High flow rates; • Small footprint and size; • Low power consumption; • Pressure-balanced; • High dynamics; This valve combines the advantages of the Spider-μProp technology with the benefits of a pressurebalanced valve. Due to its large orifice, high flow rates are possible. Furthermore, the valve is distinguished by a high reproducibility of the lift-off point. The electrical power consumption lies thereby in the lowest range of the Plate Armature Technology. The compact design of the valve provides a variety of assembly options for different areas of application.
Request for a quoteSTAIGER
Germany
• Seat principle, direct actuated; • Frictionless movement Spider µProp-valves are real proportional valves, in which the armature stroke is proportionally defined by the infinitely-variable current applied. The constant ratio between armature stroke and flow rate thus allows variation of the flow rate by way of the applied current. Spider µProp-valves are like Spider on/off valves microvalves The anchors installed in the micro valves have the shape of a disk. In energized status, this so-called flat armature is pulled against the magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. These valves have a capacity of up to 4 billion actuations, depending upon operation mode.
Request for a quoteCLIPPARD EUROPE SA
Belgium
EVP Series Proportional Valves The EVP series Proportional Control Valves combine the features of the existing EV series valve - long life, low power, and Clippard's reputation for high quality components - with the additional capability for proportional control. The EVP series valve provides air or gas flow control, and varies the output flow based on the current input to the solenoid. The consistent gain of this valve provides a high degree of control for many applications. Controllability and overall value are the main features of the EVP Proportional Valve series. The valve may be controlled using DC current, open or closed-loop control, and even PWM (Pulse Width Modulation) to cover a broad range of applications. Optional Valve Driver below. Read More about the EVP Series View Tips for Selecting the Right EVP Valve View Products • Flow proportional to input current • Fast response • Long life • Single moving part • Low friction and wear • Three connection styles • Two...
Request for a quoteLAWECO MASCHINEN- UND APPARATEBAU GMBH
Germany
The versatility and and capability of LAWECO products is most notably shown in coil processing systems. In the infeed and outfeed areas, coil lifting carriages primarily handle the coil. In conjunction with various rack systems even complete solutions can be realised. In the stack areas, stationary and movable scissor lift platforms provide the required handling. Here, it is also our goal to respond to the wishes and requirements of our customers and to provide individual solutions. Load bearing capacity up to 150 t Hydraulics with switching or proportional valve technology Movable or stationary With coupling facility With installed materials handling technolog With or without synchronous run control
Request for a quoteELKON GMBH
Germany
Being produced in ELKON’s latest tech production facilities, stationary continuous mixing plants (pugmills) are mainly used for subbase (stabilization) material with / without cement production and RCC concrete for dam or road pavement projects. Equipped with 5000/2500 l. capacity ELKON continuous twinshaft mixer, there two models of pugmill plants, 300 tons/h and 500 tons/h capacity. In this mixing plants, thanks to aggregate bins equipped with dosing belts, it’s possible to adjust material flow rate by means of frequency inverters. Cement flow rate can also be precisely adjusted by a screw equipped with frequency inverter whilst the water flow by a proportional valve. All materials are mixed passing through ELKON C200 mixer continuously according to the recipe and flow speed.
Request for a quoteFERPLAST SNC
Italy
STAINLESS STEEL MANUAL PALLET TRUCK MOD. FPGS25-I - CAPACITY 2500 Kg. The FPGS25-I hand pallet truck is built with an electropolished AISI 304 stainless steel structure and is therefore suitable for use in the food, pharmaceutical or chemical industry or in humid or saline environments. The internal pump is made of brass with excellent resistance to humidity and oxidation. It is a robust and versatile model that is suitable for handling pallets and pallets even with heavy weight. This model is characterized by: - Structure in AISI 304 stainless steel sheet - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm mounted on ball bearings.
Request for a quoteFERPLAST SNC
Italy
GALVANIZED MANUAL PALLET TRUCK MOD. FPGS25-G - CAPACITY 2500 Kg. The FGS25-G hand pallet truck is built with a galvanized structure and is therefore suitable for use in the pharmaceutical or chemical industry or in humid or saline environments such as fish markets and fishmongers. The internal pump is made of brass with excellent resistance to humidity and oxidation. This model is characterized by: - Structure in galvanized steel sheet -- Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm. mounted on ball bearings. - Double nylon loading roller diameter mm.
Request for a quoteFERPLAST SNC
Italy
The reinforced pallet trucks of the Ferplast FPGS 30 series, with a capacity of 3000 Kg. Are extremely robust and suitable for heavy applications in the industrial and logistic sectors. They are characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Directional wheels diameter 200 mm, in polyurethane. - Ergonomic tiller with 3D design for optimal grip Available in the following models: Pallet truck with forks mm. 800x400 Pallet truck with forks mm. 800x525 Pallet truck with forks mm. 1150x525 - the most requested Pallet truck with forks mm. 1500x525 Pallet truck with forks mm. 1800x525 Pallet truck with forks mm. 2000x525
Request for a quoteFERPLAST SNC
Italy
FPGS PRO MANUAL PALLET TRUCK LOAD 2500 Kg The manual pallet trucks of the FPGS PRO 2500 series, with a load of 2500 kg, are professional models, robust and suitable for handling pallets in industrial and logistic environments. They are also characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Directional wheels diameter 200 mm, in polyurethane. - Ergonomic tiller with 3D design for optimal grip The FPGS PRO 2500 models are equipped with a double loading roller but on request they can also be equipped with a single loading roller. The rollers are made of polyurethane with a diameter of mm. 82 and with ball bearings.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Thanks to a wide range of accessories, Hense operators can be individually configured for a wide variety of applications and optimally matched to the function of the overall system. To ensure perfect and safe operation, we are on hand to help you select and optimally coordinate all components.Servo valves, proportional valves and switching valves with different nominal sizes Pulsation damper for smoothing vibrations and uneven flow rates Subplates for positioning valves and pulsation accumulators close to the motor High-resolution rotation angle sensors that are coupled directly to the swivel motor shaft by means of a torsionally rigid coupling Pressure sensors Torque measuring shafts or reference torque measuring disks Clamping sets, shrink disks or profiled hubs for torque transmission Torsionally rigid couplings for reliable torque transmission with simultaneous shaft displacement Angled flanges for mounting the swivel motors parallel to the axis
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.
Request for a quoteHENSE SYSTEMTECHNIK GMBH & CO. KG
Germany
Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.
Request for a quoteTECNIDRO
Italy
The valve maintains downstream pressure to a constant and pre-set rate of upstream value. No pilots needed. The valve chamber is directly exposed to the downstream pressure and this varying pressure value modulates the valve to open or close according to upstream pressure.
Request for a quoteTECNO IMPIANTI SRL
Italy
STRAIGHTENING AND CUTTING MACHINE Model EvoCUT6012 The new Tecno Impianti straightening & cutting machines model EvoCUT are a concentrate of strength, technology and design. They are used for straightening and cutting of smooth wires made of mild steel, stainless steel, brass, copper, bronze etc.; for the latter ones, we have developed tooling with specific geometries and materials. The use of brushless servomotors and very high quality planetary gearboxes for the management of the axes ensure an excellent performance in dynamic, dimensional and quality terms on the finished product. Proportional valves for pressure control allow the operator to store the settings regarding pulling and position transducer for each single application, ensuring the constancy of the set values over the time.
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
In addition to pressure, temperature, rotational speed and flow measurements, the Hydraulic Testers can measure and evaluate different signals from other or third-party sensors. Measuring electrical signals from third-party sensor (e.g. 4 ... 20 mA, 0 ... 10 V, ...) with the PPC-06/12-A/V-A Adaptor. The PPC-06/12-A/V-A Current/ Voltage Adaptor is used, for example, for measuring current at proportional valves or for determining the switching states of motors or pumps and to evaluate and process measurements from third-party sensors. Typical applications are the generation and measurement of a force-distance graph or torque-flow characteristics curves. The following input signals can be processed by this adaptor: ▪ Electrical currents up to 4 A DC ▪ Electrical voltages up to 48 V DC The measured data are transmitted directly to the Hydraulic Testers by a permanent cable connection.
Request for a quoteSAAFI FOR IMPORT AND EXPORT.
Turkey
* 12.1 ”TFT touch screen; * Minimum tidal volume up to 5 ml * Proportional Solenoid valve control technology and precision volume sensor detection technology * SIMV / SIMV + PS facilitates the monitoring of the patient with spontaneous breathing and expands clinical applications * PSV and SIMV provide the perfect separation solution; It reduces the ventilator fight and the need for sedation or narcosis. * Compatibility, automatically compensate for fresh gas and leakage, maintain correct tide volumes and make sure you are getting what you set * PEEP can be maintained independent of ventilation mode and supports real-time visual display
Request for a quoteHERRMANN ULTRASCHALLTECHNIK GMBH & CO. KG
Germany
Simplicity without having to abandon the proved Herrmann Ultraschall standards – that are the characteristics of this machine type. Proportional valve technology and digital high-performance generators are basic equipment. A solid machine design with precision guiding rails and proved drive components are the foundation for quality and repeatable welds.
Request for a quoteHERRMANN ULTRASCHALLTECHNIK GMBH & CO. KG
Germany
Robustness, accuracy, and simplicity are attributes characterizing this ultrasonic welding machine. The entry-level models already include a position measuring system and proportional valve technology as basic equipment. Moreover, password protection and part counter are standard. Precision guiding rails and reliable drive components ensure repeatable welds.
Request for a quoteHERRMANN ULTRASCHALLTECHNIK GMBH & CO. KG
Germany
The name delivers what it promises. The ultrasonic welding machine HiQ VARIO can be configured to completely suit the customer’s needs. A large number of pneumatic drive modules with different strokes and cylinder diameters are available, always including the reliable proportional valve technology by Herrmann Ultraschall.
Request for a quoteResults for
Proportional valves - Import exportNumber of results
40 ProductsCompany type
Category