Product adjustment - Import export

The cup falls Feeding station Aluminum placing (preset cap) Waterproofing Dating Carrier’s exit Automatic date placement The cup filling machine has three photocells A photocell to check the filling whether there is any cup or not. Thanks to this photocell system, the machine will not lose the product. If there are no cups, then the machine will not proceed with filling. The photocell control for the aluminum lids, whether there is cup or not, thanks to this system if there is no cup then the machine will not waste the aluminum lids. The photocell control for sealing, thanks to this system it checks whether there are aluminum lids on the cups or not, if there are no lids on the cups then the machine will not reach the sealing unit and the machine stops.. Additional options are possible in the yogurt filling sealing machine Flow filter unit-ΗΕΡΑ Second filling station for filling multiple products Adjustment of placement between cap and cap

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons close and the grain balls come into action. Thanks to the plate on the grain rolls, the amount of product can be adjusted and flow is provided

Counterflow cooler is utilized for cooling the feed that comes out from pellet mill in pellet form which is hot, to ambient temperature. It works according to steady air form principle. Air in the external environment contacts the feed in the cooler; while the temperature of the feed drops, warm air is removed from the environment through air aspiration system.Discharge system which is on the cooler, removes cooled feed. Drainage system can be chosen with grid or hydraulic valve depending on the preferred product. Drainage system is adjustable and works according to the capacity. Applications Fields ◾ Feed Plants

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons close and the grain balls come into action. Thanks to the plate on the grain rolls, the amount of product can be adjusted and flow is provided as a curtain between the roll rolls.

Special purpose machines are our specialty. We are able to adapt our standard machines to your needs within a short time or to develop and build completely new machines for your application. Our extensive know-how allows us to accompany you from process development through the design and detailed construction of a suitable machine to measurement, commissioning and the start of production in your plant. In addition, even maintenance or product adjustments if necessary.

Increased output for further processing Tool-free format change Quick adjustment to product formats Selectable direction of rotation

More safety. More efficiency. The new generation of TwistPack packaging tubes convince with user-friendly "twist-lock" closure Maximum flexibility through universal length adjustment Optimal product protection Easy opening and closing through telescopic adjustment

VOLUMETRIC DOSERS KFG SERIES with adjustable cups for powder and granular products Dispenser made entirely of AISI 304 stainless steel, suitable for packaging powder and granular products in preformed bags with volume from 125 to 2000 ml. (depending on the model) The cups are adjustable and indicatively the volume can be reduced to 50% of the maximum capacity. Main features: - sturdy support structure in stainless steel - 25 liter capacity loading hopper - adjustable cups - product discharge cone - start pedal for product unloading

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

TABLETOP VACUUM PACKAGING MACHINE DZ 400 2T WITH TWO SEALING BARS Tabletop vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

Economical owing to highest availability Robust and extremely low maintenance Easy handling Minimum space requirement Best cost / benefit ratio ASLF 'Anti-Strap-Loss-Function' Constant strap control Strap width 5 - 12 mm, either DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable EPP 'Exact Product Path' Conveyor speed steplessly adjustable For use with PP and PET strap GreenTech energy concept, low power consumption Intuitive touchscreen operating concept Machine movable MFT 'Mono-Frame-Technology' Bundle press, optional Production data analysis via Ethernet/USB SAO 'Safe and Open' - Safe without protection doors SMART TOUCH – Icon control concept Table height steplessly adjustable Bundle flow control Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Many specific options available, easily configurable

Economical owing to highest availability Variable strap width Optimal access Intrinsically safe machine, protection door-less concept Unique, the lateral strapper principle in the inline strapper 5000 bundle recipes ASLF 'Anti-Strap-Loss-Function' Constant strap control Strap width 5 - 9 mm, adjustable Automatic strap threading, soft Strap end detection system with automatic discharge of remaining strap Automatic strap tensioning, stepless Strap coil detection with yellow indicator lamp DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable Upstream and downstream interlocks with complete plug connection EPP 'Exact Product Path' ETS 'Easy to Service' - Maintenance while production Conveyor speed steplessly adjustable GreenTech energy concept, low power consumption High-Speed-Kit, optional Bundle stops, optional Bundle press, optional Production data analysis via Ethernet/USB SAO 'Safe and Open' - Safe without...

Blown film consistent quality by the roll At Dürrbeck you can expect a large selection of tubular film in various widths and thicknesses and with a range of features. This variety is important as products vary in their shapes and sizes, and require different levels of protection. Plastic blown film is especially suitable for products with adjustable lengths. Blown film is typically made of low-density polyethylene (LDPE). Polyethylene is affordable, durable, watertight and tear-resistant. Depending on how it will be used, we also produce plastic blown film made of high-density polyethylene (HDPE), medium-density polyethylene (MDPE), and linear low-density polyethylene (LLDPE). Blown film made of DKFol®-Eco and DKFol®-Eco-Coex offers especially high strength with low thickness. These films allow for a reduction in thickness, without compromising on strength and stability.

With the flexo 700 e-com you are optimally equipped to meet the demands of film packaging for the e-commerce, mail order and logistics sectors. Whether dealing with the direct dispatch of individual goods, packing groups of products or meeting the complex requirements of returned goods packaging for example, the flexo 700 e-com packs goods with a minimum use of film and automatically adjusts the film bags to the product‘s length as standard. To support the precise fitting of shipping bags, the flexo 700 e-com fit model also adjusts the bag size to the product's width so that the machines fully automatically adjust to varying product sizes during the packaging process. Additional options include the ability to add an easy-opening perforation to the bags as well as inserting a double-sided adhesive tape for resealing a bag for returns.

Flottweg Sedicanter separates solids from liquids. Its special feature: the solids consist of a sediment with properties ranging between soft and fluid. Typical applications of the Sedicanter are "soft products": ► Biomass, yeast and protein suspensions. ► Fermentation broths and UF retentate ► CIP cleaning liquids and coarse matter-free live sludge ► Fruit juice byproducts and plant-derived raw materials ► Soap separation from oil refining processes The special technical features of the Flottweg Sedicanter: ► Separation of extremely difficult-to-sediment solids by acceleration up to 10,000 gee. ► Hygienic design, thus usable for applications in biotechnology ► Flexibility with fluctuating composition of the feed product by the adjustable impeller ► Gas-tight operation is possible by sealing the separation space off from the ambient air using inert gas

Press&snap capping machine is used for snapping press type caps, including three main parts: cap feeding system, cap loading system and cap snapping system. It is characterized by its simple structure and high qualification rate. Can be used alone or inline. Linear design makes it suitable for various caps & bottles with good adaptability, widely used for pressing jar cap, plastic bottle cap, can caps, in industries like food, beverages, cosmetics, chemicals,etc. The machine use the straight line into the bottle, automatically arrange caps, sleeving caps ,caps after sleeve and check will go into the gland system by the clamping belt. Due to the lid-cover flat belt design have a drop of slop, the caps after press will become more and more tightly.The machine has simple structure, convenient adjustment, production speed fast, high pass rate, after cap pressing has good performance, suitable for cap pressing of foodstuff, soy sauce, vinegar, vegetable oil’s bottle shape.

The SYSTEM-F, a fully automatic vertical form-fill-seal packaging machine, produces pillow bags and gusset bags with or without carrying handle and a filling weight between 5 kg and 50 kg from flat film. The System-F is particularly ideal for packaging powdery and moderately free-flowing products. Thanks to an adjustable format set, different package sizes can be produced. The format and/or production can be changed by one person in just a few minutes. This is made possible by a rotating magazine, which is installed directly on the machine and holds several format sets of different sizes ready at all times. The vertical FFS packaging machine impresses with its compact design and low space requirement. Further options allow this bagging machine to be adapted to a wide range of requirements.

The RTP 8301.CT is based on laser triangulation sensors and therefore ensures the measurement being independently from material constants. The system is designed as O-frame, both sensors detect the thickness according to the differential method. In order to ensure highest precision, the laser beams of the sensors are accurately adjusted during the production process using optoelectronic tools which have been specially developed. The system is ideal for monitoring high-dynamically processes due to its high measuring rate. The O-frame mechanics of the system dispose of a compensation frame which does not vary with temperature and which is used in order to avoid temperature fluctuations of the measuring frame using further sensors. The profilometer corresponds to the TIP 8301.CT regarding its functionality. However, it has a different operators´ frontend and evaluation functions.

Powerful derinding machine for large and small pieces of cheese. In addition to an ideal cutting width, the Weber Cheese Skinner offers product-specific height adjustment of the blade, meaning that natural and plastic rinds can be optimally removed. Maximum product yield is guaranteed. Advantages Powerful and with a compact footprint A special cheese transport roller and perfectly adjusted blades for optimal processing results Ideal cutting width for powerful derinding of large and small pieces of cheese Bolted blade with blade protection in cleaning position Unique geared brake motor with quick stop Options: special voltages

The microdosing technology of IFA Technology guarantees that raw material dosing happens according to a fixed sequence with highest dosing accuracy. We consider your individual requirements and the local conditions in order to develop customised dosing systems for you. Our dosing systems can also be integrated into existing production plants. The adjustable dosing parameters enable optimum dosing results to be achieved for the various raw materials. Do you have any questions on microdosing technology? If you are interested in our technology, please do not hesitate to contact us! We look forward to hearing from you

Combination machine for thick and thin: The AMS 533 TWIN skinning machine is particularly suited to processing cuts with thick tendonsand skin, such as pork loin, pork silverside, beef or veal silverside and boiled beef fillet. Advantages Removal of tendons and skin with one machine TWIN transport rollers and specially coordinated blades providethe highest possible yields Ideal cutting width for powerful skinning and tendon removal inlarge and small cuts Effort-saving work table design due to ergonomicmachine assembly Blade guard in cleaning position Gear brake motor with quick stop Product-specific precision adjustment Options: Quick-clamp blade holder for tool-less blade changing Body lever switch Skinning procedure protection Skinning gloves Special tension rollers

An idle cut blade head with automatic cutting gap adjustment ensures that the Weber Slicer 604 has a high yield with minimum giveaway. The product throat can be adjusted automatically in height and width, and the fully automatic central loading unit ensures rapid product changes. Products up to 1,700 mm in length are fed in automatically and processed at up to 600 slices per minute. The shear bar and side limit stop can be configured by motor and with programme control. That allows the Weber Slicer 604 to guarantee a precise cut and placement of perfect slices continuously. Options: Slice folder Variogripper Idle cut blade head Separate blade drive Interleaver Portion designer

FESSMANN genuine spare parts are tried and tested in the process and correspond fully to the construction specifications. This pays off by highest availability. The high quality of the genuine FESSMANN spare parts used will lead to evenly high product quality. Timeconsuming adjustments are a thing of the past. Our service offers spare and wear parts for old and new systems. Our technical support is available to you with its competence and experience for the selection and consulting needed. We supply the required parts just in time for planned maintenance. We will gladly offer any support you need for maintenance and repairs. In the scope of service agreements, we also offer comprehensive and longterm spare parts concepts.

Our specialist consultants are trained and experienced technicians from the butchers' craft who will always keep an eye on your process along with the system technology. This way, we can offer you best consulting from commissioning to product optimisation. With our great experience, we put together ideal product ranges for you and adjust them to your wishes. Our technical consultants can also advise you on how to optimise processes in your existing FESSMANN systems. At the same time, you can improve your professional use of the reliable FESSMANN system. This ensure that your customers will receive best flavour at the highest productivity. Produce the best product at best consulting. Convince yourself of it!The FESSMANN specialist consultancy service can also be combined with other services in service agreements to permit highly efficient use at your end.

The CLMIA.LiNE D KNR ensures ideal ripening conditions for your products. Besides the adjustment of the room's temperature and moisture exactly to the required level, the system has many more advantages For example its intelligent fancontrol, preventing the unintended growth of spores! Constant conditions for reproducible quality Highquality design of aggregate and piping Lowmaintenance system Intelligent fancontrol to prevent unintended sporegrowth

The AF filter presses from AQUACHEM are a further development of conventional chamber filter presses, which have been tried and tested in the industry for over a century. However, due to the degree of automation required and the increase in efficiency necessary nowadays, the technology we have had up until now is often no longer up to date. The design of the AF filter presses is based on the optimum interplay of the ?? individual assemblies of the filter press to ensure reliable, efficient and permanent operation without personnel being present. The automated flexibility of the product enables autonomous adjustment to changing conditions, such as concentration or even specific filter properties. We guarantee these properties and also availability. This is only possible because AQUACHEM and the AF-series possess the knowledge, an intelligent control system and the technology for maximum flexibility. Yes, this is a product with unique selling points – test it out yourself.

New- / First- /Common Signal Annunciator RP 5994, RP 5995 • Fast localisation of failures and their causes • Reduction of standstill times in production • Adjustable operating modes: New- / First signal annunciator according to DIN 19 235, common alarm annunciator manual reset / auto reset settable • Expandable from 8 to 88 fault signals • Open or closed circuit operation settable • Adjustable on delay for input signals 0 to 10 sec • Reset buttons for audible alarm and common alarm on front side • Connection for external reset of audible alarm, common alarm and single alarm according to setting • Galvanic separation to bus RS485 (optional) • Accessories: buzzer RK 8832, display unit EH 5994, EH 5995 text display unit EH 5996, GMS-module RP 5810 • Width: 70 mm Base module RP 5994: - 8 fault signal inputs with indicator LED on the unit - One relay output each for audible alarm and common alarm - Reset buttons for audible alarm, common alarm, and single alarm - Connection of remote...

Category: Adjustable Height Floor Drains Product Code: Adjustable Height Head Product Specifications: Casing: ABS Plastic Grate: 304 Grade Stainless Steel Frame: 304 Grade Stainless Steel

Category: Adjustable Height Floor Drains Product Code: Adjustable Height Head Casing: ABS Plastic Grate: 304 Grade Stainless Steel Frame: ABS Plastic Outlet: Ø50 - Ø32