Power packs - Import export

industrial & mobile hydraulic products

This high pressure water jetting unit is extremely flexible due to its usage as a trailer. Three versions of the MK3 with operational pressure of up to 2500 – 3000 bar are available and is ideal for the removal of coating and concrete refurbishment, as well as for the separation and cutting of various materials. The easy to understand WOMATIC 4Control with operational status monitoring, pressurerpm regulation and pressureless circulation ensures high operational safety, low wear and tear, long service life, and last but not least, minimal fuel consumption.

1700-2500 PSI Hydraulic Power Packs for Hydraulic Circuits

The submerged waste water pump TWP 7025 E is a compact power pack mastering virtually every task brilliantly. With a power consumption of 750 W the high-suction pump transports up to 13,000 litres of contaminated water per hour. Due to this enormous conveying capacity of the TWP 7025 E, flooded basements and living spaces are quickly rendered accessible again, and pumping water out of building and waste water pits as well as withdrawing water from lakes, rivers and ponds can be done easily and without any problems. Even the water volumes of larger ponds or swimming pools can be circulated or disposed of quickly and easily. This power pack pumps water containing dirt particles sized up to 25 millimetres up to a pump height of 9 metres reliably and smoothly. This way it is able to transport water from a flooded basement to the next higher floor and thus out of the house.

This single coil induction cap sealer offers users increased productivity, an easier set-up and more control. The easy-to-use touch screen is available in multiple languages. The Super Seal™ Touch is our most powerful compact single-coil machine and is designed for production lines running at up to 40 metres per minute. The air-cooled power pack is separate from the induction sealing coil. • Pre-programmed and fully integrated touch screen control for inspection and rejection • Remote start/stop and remote power control (auto start function available) • Password protection with operator lockout • High and low level set power alarm • Recipe management • Internal monitoring of all critical operating data • Diagnostic system information • Internal USB data port – Network connectivity available • Stainless steel IP55 enclosure • Robust stainless steel fully adjustable stand for different container heights • Seals a variety of caps ranging from 20mm – 150mm

COMMERCIAL DEHUMIDIFIER TTK 105 SThis robust lightweight makes a good impression even in rough surrounding conditions As to be expected from such a high-quality device of German manufacturing, the TTK 105 S impresses with a perfect combination of robust exterior and progressive interior. The hard-wearing power pack is provided with a stackable aluminium housing. This eases transport enormously – and handling, too: Instead of using unreferenced adjustment levels between minimum and maximum operation, with the TTK 105 S you can directly enter the desired humidity value via the digital display where the current temperature and humidity values of the room air can be read at all times. An integrated hygrostat implements the selected target fully automatically and adjusts the performance of compressor and two-staged fan.

with pneumatic pressing station for the xed design of palletizable packs for products with 2,200mm, hood opening 800x350mm, hood length 1,600mm, heating power 18KW, speed < 10 pack per mintue

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

With a maximum nominal torque of 14 Nm, the new AG24 is a real power pack for format adjustment Easy mounting. Stainless steel hollow shafts up to max. Ø 20 mm. “Manual” traveling without control via micro-button. Brushless 160 W, 24 V DC motor with long service life. Integrated absolute position encoder on the output shaft. Integrated positioning controller. Integrated spring-operated brake (option). 2-line LCD for target and position value and operating keys. Integrated Industrial-Ethernet-Fieldbus. M12 component mounting technology. Manual emergency adjustment.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

The UniPower light is the small, powerful and universal Lithium battery pack by SBS. Through our modular design you can configure voltage and capacity to fit your application.

Lifting platform HY 1001 pantograph with low profile. Also included in the price is the access ramp of 1200 mm length, for the discharge and the load by pallet truck. Features: Structure in high thickness sheet steel with high thickness Construction according to European safety standards Electrohydraulic control unit positioned externally Keypad with protection IP 54 positioned on the hydraulic power pack Security perimeter aluminum on the upper platform Hydraulic power unit designed for intermittent use by 30%. Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Joints with self-lubricating bushings Lifting hooks removable for transportation and installation Mechanical lock for maintenance Painting with yellow RAL 1028 Access ramp length 1200 mm for pallet truck

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

The lifting platforms HW-C series are lifting equipment to be installed in a fixed position and are driven by a hydraulic power pack. Manufactured according to the accident prevention, they consist of two platforms (upper and lower) and a pantograph system actuated by a hydraulic cylinder. The HW-C series is characterized by the perimeter protection bellows. Main Features: Very strong structure in painted steel Construction according to CE safety standards Upper platform in smooth metal sheet Perimeter protection bellows Hydraulic unit of European production, positioned internally, designed for intermittent use by 30% Keypad with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with valve fall arrest in case of breakage of the pipes Antishearing safety distance between the arms of the pantograph Joints with self-lubricating bushings Lifting hooks removable for transportation and installation

Lifting platform single pantograph with U or E profile (FPHU/FPHE 1000) for the insertion of the pallet. On request it is possible to make a modification to the platform transforming the profile from U to E in order to have a central support for the pallet. This variant guarantees the lifting of heavy pallets without risk of flexing. For correct operation of the platform the load must be distributed evenly regardless of the type of profile in use. Features: Structure in high thickness sheet steel Construction according to European safety standards Electrohydraulic control unit externally positioned Keypad with protection IP 54 positioned on the hydraulic power pack Security aluminium perimeter on the upper platform Hydraulic power unit designed for intermittent use by 30%. Hand control with low voltage controls Hydraulic system with a safety valve for overload Control valve for descent speed Large hydraulic cylinders with fall arrest-valve in case of breakage of the pipes

TTK 125 S COMMERCIAL DEHUMIDIFIER"Nobody can offer as many litres at this weight" The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype. The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions. Good things come in small packages: Power pack TTK 125 S Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

ELECTRIC HEATER FAN TDS 755-10-15 – solid three stage heating power up to 15 kW A true power pack, the electric heater fan TDS 75 cuts a remarkably fine figure even with large-volume heating tasks. And not by chance, but exclusively made by Trotec. And since our distinctive logo has been printed on the outside, we have also incorporated convincing extras inside, which make all the difference to conventional standard electric heater fans. In addition to common equipment features such as a fan motor provided with thermal protection or a reliable overheating protection, the electric heater fan TDS 75 comes equipped with further practice-oriented features, e.g. an integrated air baffle, which optimally leads the warm air flow outside and initiates maximum efficiency, or trapezoidally mounted carrying handles, on which the electric heater fan can be stably stacked a number of times.

Design and supply of battery packs and converters for your professional or leisure marine equipment. FORKLIFT ENERGIE puts its 15 years of industrial experience at your service, whether you need to convert thermal track equipment back to electric power, design a battery pack to suit your heavy or light electric vehicle, or advise you on the choice of an industrial lithium battery compatible with the activity of your workboat or leisure craft. Design and integration of battery energy storage systems, Support in choosing solutions that take into account the human, technological, functional, sustainable and financial aspects. At every stage, we draw your attention to the advantages and disadvantages of the proposed technology

Combics provides support in all areas of your process chain, from manual formulations up to PC- controlled production checks. The modular system allows tailor-made configuration of the individual components for each area. We also produce individual complete solutions according to your specific applications. For use in explosive areas (certificates: IECEx \ ATEX Zone 1 \ 2 \ 21 \ 22 and FM Class I, II, III Div. 1) LCD display, 20mm, 14 segments, 7 digit weight value with status information, back lit Housing in stainless steel, IP69K Scale connection for analogue Ex platforms, as e. g. Combics Ex, IU EX, IF EX or Ex load cells. Optional also digital IS Scales (xBPI) Internal alibi memory Serial interface RS232 \ 485 \ 422 Div. power supplies available, also battery pack Fieldbus Profibus DP and 4 ... 20 mA interface

This adjustable mechanism has a patented technical engineering advantage over any other wallbed mechanism now in use. The power of the SBLM-A mechanism is held in reserve until the panel bed face is in position - then the SBLM-A power pack is adjusted to bring the bed into perfect balance. This new lift mechanism is not intended to reduce the number of springs or the amount of power required to lift and balance the panel bed. Its unique design and ease of adjustment make the installation safer and simpler. TECHNICALLY ADVANCED MECHANISM: Better balance can be achieved by adjustment. Easier to add or reduce the number of springs. The user/installer is not required to manually arm the mechanism - it is all done by screw adjustment. Safer than other standard mechanisms.

Connected to a self-contained power pack supplying 230 V, the LED triangle provides 360° area lighting that's mobile and 100% self-contained. This system will be with you every step of the way, giving you a high quality of work.

Stand-alone lithium power packs The most POWERFUL & LIGHT-weight stand-alone power solution! LITHIUM cabinets provide the electrical autonomy required for optimised operation of all types of electrical devices: computers, printers, terminals, industrial equipment, control equipment, etc. They integrate electrical storage, energy conversion, interfacing and control functions in a complete, secure, flexible and easy-to-use system.