Power packs - Import export

This high pressure water jetting unit is extremely flexible due to its usage as a trailer. Three versions of the MK3 with operational pressure of up to 2500 – 3000 bar are available and is ideal for the removal of coating and concrete refurbishment, as well as for the separation and cutting of various materials. The easy to understand WOMATIC 4Control with operational status monitoring, pressurerpm regulation and pressureless circulation ensures high operational safety, low wear and tear, long service life, and last but not least, minimal fuel consumption.

1700-2500 PSI Hydraulic Power Packs for Hydraulic Circuits

The submerged waste water pump TWP 7025 E is a compact power pack mastering virtually every task brilliantly. With a power consumption of 750 W the high-suction pump transports up to 13,000 litres of contaminated water per hour. Due to this enormous conveying capacity of the TWP 7025 E, flooded basements and living spaces are quickly rendered accessible again, and pumping water out of building and waste water pits as well as withdrawing water from lakes, rivers and ponds can be done easily and without any problems. Even the water volumes of larger ponds or swimming pools can be circulated or disposed of quickly and easily. This power pack pumps water containing dirt particles sized up to 25 millimetres up to a pump height of 9 metres reliably and smoothly. This way it is able to transport water from a flooded basement to the next higher floor and thus out of the house.

with pneumatic pressing station for the xed design of palletizable packs for products with 2,200mm, hood opening 800x350mm, hood length 1,600mm, heating power 18KW, speed < 10 pack per mintue

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

With a maximum nominal torque of 14 Nm, the new AG24 is a real power pack for format adjustment Easy mounting. Stainless steel hollow shafts up to max. Ø 20 mm. “Manual” traveling without control via micro-button. Brushless 160 W, 24 V DC motor with long service life. Integrated absolute position encoder on the output shaft. Integrated positioning controller. Integrated spring-operated brake (option). 2-line LCD for target and position value and operating keys. Integrated Industrial-Ethernet-Fieldbus. M12 component mounting technology. Manual emergency adjustment.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

The UniPower light is the small, powerful and universal Lithium battery pack by SBS. Through our modular design you can configure voltage and capacity to fit your application.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

COMMERCIAL DEHUMIDIFIER TTK 105 SThis robust lightweight makes a good impression even in rough surrounding conditions As to be expected from such a high-quality device of German manufacturing, the TTK 105 S impresses with a perfect combination of robust exterior and progressive interior. The hard-wearing power pack is provided with a stackable aluminium housing. This eases transport enormously – and handling, too: Instead of using unreferenced adjustment levels between minimum and maximum operation, with the TTK 105 S you can directly enter the desired humidity value via the digital display where the current temperature and humidity values of the room air can be read at all times. An integrated hygrostat implements the selected target fully automatically and adjusts the performance of compressor and two-staged fan.

TTK 125 S COMMERCIAL DEHUMIDIFIER"Nobody can offer as many litres at this weight" The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype. The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions. Good things come in small packages: Power pack TTK 125 S Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems.

Combics provides support in all areas of your process chain, from manual formulations up to PC- controlled production checks. The modular system allows tailor-made configuration of the individual components for each area. We also produce individual complete solutions according to your specific applications. For use in explosive areas (certificates: IECEx \ ATEX Zone 1 \ 2 \ 21 \ 22 and FM Class I, II, III Div. 1) LCD display, 20mm, 14 segments, 7 digit weight value with status information, back lit Housing in stainless steel, IP69K Scale connection for analogue Ex platforms, as e. g. Combics Ex, IU EX, IF EX or Ex load cells. Optional also digital IS Scales (xBPI) Internal alibi memory Serial interface RS232 \ 485 \ 422 Div. power supplies available, also battery pack Fieldbus Profibus DP and 4 ... 20 mA interface

In forging mills, rolling and gravity die-casting foundries, and steel finishing works, these machines provide the ideal answer for dealing with large dimensions. They are perfect for preproduction in tool and mold making factories, helping to save valuable milling time. The material support table is recessed in the foundation. Its low-level transition to the hall floor makes for simpler material handling. The moving saw frame can be positioned by axis control precisely at the point of cutting. Where no sawing is taking place, the table is freely accessible. This also allows space for a second piece of material to be loaded while the saw is cutting. This system helps reduce downtime between cuts and enhances productivity. Benefits of the Gantry Machines - Space-saving installation - Durable material support table - Simple positioning of the saw frame - Optional: blade guide with 90° rotation facility for vertical and horizontal sawing to allow notching of materials

Wherever heavy loads have to be transported to great heights, the new GEDA BL 2000 ensures the necessary efficiency in the construction process. The person and material hoist has a load capacity of 2,000 kg or 23 people and a lifting speed of 55 m/min and the new power pack from GEDA is available as a single and twin variant. The platform size of 1.45 x 3.20 x 2.10 metres also enables the transportation of bulky goods up to a lifting height of 250 metres. To make the hoist even more convenient and user-friendly, it has been equipped with comprehensive state-of-the-art control variants. The GEDA BL 2000 is available in two variants, a Standard and a Premium model.

The discharging generator DG 306 is the power pack of the KERSTEN next product family and can be used to supply all the next® discharging components. With its 6 high voltage connections he can easily manage every large installations, nevertheless it is very compact. With the patented DC High voltage technology you don´t have to worry about EMC interferences anymore while you receive the best possible discharge power. By using the 24 V DC fault indication contact, you have the option to receive a fault signal directly in your system. the High voltage Generator DG 306 is supplied by a 24 v DC input voltage and is therefore independent of the world´s different network standards. The generator provides two insulated and against reverse polarity secured high voltage connections, where discharging devices can be fast and easily connected to.

Latest information. Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Product details Supplier: Maysun Solar Product number: MS(495-520)MB-50H Power: 510W Packing: Pallet: 31 pieces Solar cell: monocrystalline silicon Cells: 100 cells cut in half Dimension: 2185 x 1098 x 35mm Weight: 26,5kg Glass: 3.2mm (0.13 inch), high transmission rate, AR coated and heat strengthened glass Encapsulation material: EVA Back: White Frame: 35mm (1.38 inch) anodised aluminium alloy Junction Box: IP68 rated Cable: PV technology cable 4.0 sq. mm (0.006 sq. in.) N 300 mm/P 300 mm (11.8/11.8 in.) length can be customised. Connector: MC4

Latest information. Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Product details Supplier: Maysun Solar Product number: MS(495-520)MB-50H Power: 510W Packing: Pallet: 31 pieces Solar cell: monocrystalline silicon Cells: 100 cells cut in half Dimension: 2185 x 1098 x 35mm Weight: 26,5kg Glass: 3.2mm (0.13 inch), high transmission rate, AR coated and heat strengthened glass Encapsulation material: EVA Back: White Frame: 35mm (1.38 inch) anodised aluminium alloy Junction Box: IP68 rated Cable: PV technology cable 4.0 sq. mm (0.006 sq. in.) N 300 mm/P 300 mm (11.8/11.8 in.) length can be customised. Connector: MC4

Latest information. Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Product Details Product number: MS(440-460)MB-60H Power: 455W Packing: 37 pcs/pallet Solar cell: monocrystalline silicon Cells: 120 cells cut in half Dimension: 1910×1134×30mm weight: 24.2 kg Glass: 3.2mm (0.13 inch), high transmission rate glass, AR coated and heat strengthened glass Encapsulation material: EVA/POE Back: White Frame: 30mm (1.18 inch) anodised aluminium alloy Junction Box: IP68 rated (3 bypass diodes) Cable: PV technology cable 4.0 sq. mm (0.006 sq. in.) N 300 mm/P 300 mm (11.8/11.8 in.) length can be customised. Connector: Corresponds to model MC4 Pallet: 37 pcs

Application The portable HD 2500 is designed for delivering high hydraulic pressure up to 2500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 2500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

Application The portable HD 1500 is designed for delivering high hydraulic pressure up to 1500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 1500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

Description TDC 1500 Year of construction 2017 Serial Number 36160700-1 Product contacted material 316L Seal design PTFE – FEP Silicone Vessel diameter (mm) 1,460 Total volume (l) 1,780 Useful volume (l) 1,000 Agitator drive (HP) 30 Speed range (rpm) 3 – 33 Mechanical seal Yes (lift-off / contacting seal) PED No ATEX No ASME / “U” STAMP Yes Dust filter (m²) 0.9 Hydraulic power pack Yes Control System Yes Motor and Gearbox 30 HP – 3×480 V+N, 60Hz Electric components CSA Class 1, Zone 2, Group IIB, T3