Power installations - Import export

It can realize 48VDC power supply In two installation modes of suspension rope and suspender The orbit can rotate vertically ±20 degrees

Dimensions Width 3.00m Length 12.00m Height 2.61m Square meters 36.00m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 6x windows, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can produce other sizes and colors according to your specifications at short notice. Accessories You can also order the following Water heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Socket (incl. installation, cable & cable duct with socket) 45 € Power socket (incl. installation, cable & cable duct with socket) 170 € Forklift introductions (incl. installation) €650 The prices does not include VAT.

Dimensions Width 3.00m Length 8.00m Height 2.61m Square meters 24.00m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 6x windows, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can produce other sizes and colors according to your specifications at short notice. Accessories You can also order the following Water heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Socket (incl. installation, cable & cable duct with socket) 45 € Power socket (incl. installation, cable & cable duct with socket) 170 € Forklift introductions (incl. installation) €650 The prices does not include VAT.

Dimensions Width 2.40m Length 6.00m Height 2.61m Square meters 14.6m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 3x floortoceiling windows, 1x normal window, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switch, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and colors according to your specifications at short notice. Accessories You can also order the following Water heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Socket (incl. installation, cable & cable duct with socket) 45 € Power socket (incl. installation, cable & cable duct with socket) 170 € The prices does not include VAT.

# Description Taihan Fiberoptics offers an extensive selection of self-supporting fiber optic cables used in pole-to-pole networks, overhead transmission lines and distribution lines as an excellent solution for aerial networks with outstanding optical performance,durability and reliability. All our prototypes are designed and manufactured to operate under the required environmental conditions and to endure the external forces, such as wind, ice and extreme temperatures to which they might be exposed to during their lifetime. ADSS cables have become the No.1 choice for ISPs and Power Utilities for network expansion due to its faster deployment and reduced installation cost. # Applications - Pole to Pole aerial installations - FTTx networks - Enterprise OSP Networks - Electric Utility Distribution Power Lines - Duct installations # Products - Rock ADSS™ Short span - Rock ADSS™ Long span

What you can expect from APROVIS gland steam condensers: - Can be used in regenerative and conventional applications - A complete system including blowers - Materials are adapted to the relevant application - Acceptance currently according to PED 2014/68/EU and the ASME Code; additional certifications to follow

The genius tool for quick installation of bolt screws with power driver Quickest installation through new put - on system. Suitable to screw in and out Simply put on the screw - turn - and take off We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.

Transformer rental packages for safe, reliable power When working with high voltage power, you need a partner you can rely on. That’s why our team are the best trained specialists for the job - providing advice on our transformer rental service when you need it most. Ranging from 2.5 to 6.3 MVA, our industrial transformers can be used for applications from 1.25 kV to 33 kV. With the ability to operate at 50 and 60 Hz they can be used for stepping voltage up or down to match system requirements. Whether you need an islanded power package to load test, or to provide power as a distribution transformer - we'll find the solution with our transformer rental services. We have a large fleet of utility-grade containerised electrical, low and high voltage, transformers that we utilise to design and install tailor-made power packages. Most Aggreko industrial transformers for hire come as a complete, packaged sub-station, with integral switchgear

Our 125 kVA canopy diesel generator hire service can assist with your planned or emergency power generation requirements. If you need portable and reliable power, we'll rapidly deliver and install our 125 kVA generators to get you up and running in no time. Data is based on 50 Hz. For more information please request a data sheet on our 125 kVA diesel generator. Generator shown may not be representative of equipment available at the time. EU emissions compliant to the Stage IIIA standard for Non-Road Mobile Machinery (NRMM). Super-silent sound attenuation levels without compromising performance. Tough but light-weight steel canopy enclosure. Simple controls and connections. Fork lift pockets for easy loading and unloading with hiab vehicles. Fully-bunded fuel tanks available, to reduce the risk of fuel leakage. Unique particulate filtration units can be fitted to most generators to dramatically reduce particulate matter. 24/7 Aggreko Remote Monitoring.

Compared to the single-shaft units, LIST Twin-Shaft KneaderReactors offer even better mixing and kneading behavior, more effective self-cleaning properties and the more efficient renewal of boundary layers. These and many other features make the LIST Twin-Shaft KneaderReactor the best choice for processes such as, Bulk polymerization Polycondensation Drying Dissolving Sublimation and others In a LIST Twin-Shaft KneaderReactor, the high-torque shafts are designed to rotate in either the same direction or in counter-direction. In both cases, the kneading elements on the shafts intermesh to generate intensive surface renewal and mixing. At the same time, shear rates remain low. LIST Twin Shaft KneaderReactors are also nearly 100% self-cleaning. Typical design specifications: Volume: 3 … 10´000 l Operating pressure: 0.001 ... 10.0 bar (a) Operating temperature: -100 ... +400 °C Operation mode: Batch or Continuous Installed Power: ... 1.5 MW Torque: ... 500 kNm Drive: Hydraulic...

The extremely versatile LIST Single Shaft KneaderReactors are in successful operation in a wide range of industrial-scale process applications, e.g. Crystallization Drying Dissolving Main Evaporation Devolatilization Torrefaction and others The inovative design features a single mixing shaft whose kneading elements intermesh with counter-hooks attached to process housing providing a self-cleaning effect. The rotation speed and geometry of the mixing shaft and kneading elements are customized designed to optimize the prozess efficiency. With an operating volume up to 20 m3, it provides the capacity to handle largest production capacities. Typical design specifications: Volume: 7 … 20´000 l Operating pressure: 0.001 ... 16.0 ... 100 bar (a) Operating temperature: -100 ... +400 °C Operation mode: Batch or Continuous Installed Power: ... 2.5 MW Torque: ... 500 kNm Drive: Hydraulic drive units or electric motor with or without frequency converter Shaft seal: Stuffing box or...

Power Busbar (40A-63A)"E-Line KAP Busbar Systems" can be used to feed lighting and small power installations in commercial and industrial buildings such as offices, factories, workshops, warehouses and airports.

RM Series are modular UPSs with hot swappable batteries. It is an ideal system in which both power modules and batteries from 20 kVA to 60 kVA can be changed under energy in a single cabinet. It includes smart battery management and protection technology. With its special cabinet design, it offers an easy and compact power solution for installation, maintenance and power increase.

The micro-jets set adds a delicate touch to the hydro-massage’s power. This optional can be installed on any system, depending on the bathtub model. Limit: The 6 dorsal micro-jets set can’t be installed on Alegria bathtubs of 150 and Ludica of 150.

Depending on your technical and economic constraints and the power supply requirements of your equipment (IT, industrial equipment, etc.), TECSUP offers closed Autonomous Power Units (APE), installed in a fixed position on a fixed or mobile support.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. Ali cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 40-70 Volt Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. Ali cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 40-70 Volt Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. Ali cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 40-70 Volt Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's "Midi" bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of one Adult and one Child each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 40-70 Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Bertazzon's bumper-cars, have been designed to be operated on apposite steel pavement track surrounded by enclosure bumper profile. AII cars are equipped with inflated rubber bumper all around the perimeter, specially designed to reduce the impact between vehicles and with the guard. These vehicles have a capacity of two passengers each and are equipped with fixed restraint belts. The driving unit consist of Bertazzon house-made patented clutch-less DC motor operating at variable voltage of 60-11O Volt. Low voltage motor is also available for "Floor power pick-up" installations.

Designed to perform welding inspections on cylinders up to a diameter of 250mm, the AIS231 is a real time system designed to be automated that can also be installed with an ADR module (depending on the client requirement). It is equipped with a shielded cabinet for up to 450kV depending on the power of the generator installed, a flat panel, a 2 axis manipulator, a motorized door, and more. To ensure a great and easy environment of work, the control desk will carry a 19’’ computer with the Inspection suite of software installed allowing the automation of the process which will fastened the everyday inspection.

We design, manufacture, build, train and service The pellet production lines designed and installed by our company offer capacities ranging from 2 t/h to 20 t/h. The capacity achieved naturally depends on the number and power of the machines and equipment comprising the production line. Pellet production lines – the offer: •design (technical conceptual design, formal arrangements, technical documentation, manuals, cost calculation), •supply (machines, devices, measuring and control apparatus, control cabinets, and all installation materials), •installation (machines, devices, control cabinets, measurement, control and feed wiring, post-installation testing, acceptance measurements), •software (controllers, operator panels, visualisation and control systems), •commissioning (machines, devices, control cabinets, control and power installations), •training process operators, programmers and IT technicians and technical human resources, •service within the warranty period and beyon