Power installations - Import export

Dimensions Width 3.00m Length 12.00m Height 2.61m Square meters 36.00m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 6x windows, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can produce other sizes and colors according to your specifications at short notice. Accessories You can also order the following Water heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Socket (incl. installation, cable & cable duct with socket) 45 € Power socket (incl. installation, cable & cable duct with socket) 170 € Forklift introductions (incl. installation) €650 The prices does not include VAT.

Dimensions Width 3.00m Length 8.00m Height 2.61m Square meters 24.00m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 6x windows, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switches, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can produce other sizes and colors according to your specifications at short notice. Accessories You can also order the following Water heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Socket (incl. installation, cable & cable duct with socket) 45 € Power socket (incl. installation, cable & cable duct with socket) 170 € Forklift introductions (incl. installation) €650 The prices does not include VAT.

Dimensions Width 2.40m Length 6.00m Height 2.61m Square meters 14.6m² This offer includes 1x room, 1x toilet with sink, 1x kitchen, 3x floortoceiling windows, 1x normal window, 2x entrance door Prefab container with 80 mm roof and 50 mm wall insulation. Including electrical preinstallation (fuse box, 3 sockets 230V, 2x LED ceiling lights, switch, cable ducts, cables). Please provide suitable equipment for unloading, e.g. B. Forklift, wheel loader with pallet fork or crane. We can make other sizes and colors according to your specifications at short notice. Accessories You can also order the following Water heater shower (incl. installation & sealing) 400 € Water boiler sink (incl. installation & sealing) 300 € Socket (incl. installation, cable & cable duct with socket) 45 € Power socket (incl. installation, cable & cable duct with socket) 170 € The prices does not include VAT.

What you can expect from APROVIS gland steam condensers: - Can be used in regenerative and conventional applications - A complete system including blowers - Materials are adapted to the relevant application - Acceptance currently according to PED 2014/68/EU and the ASME Code; additional certifications to follow

The genius tool for quick installation of bolt screws with power driver Quickest installation through new put - on system. Suitable to screw in and out Simply put on the screw - turn - and take off We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Square cartridge heaters are used where much power has to be installed near the surface of a tool, e.g. in cutting knives, sealing stations or hot plates. With a soft, malleable condition in stainless steel or nickel sheath square cartridge heaters can easily be pressed into common milled rectangular grooves. Apart from the advantageous heat transfer over ¾ of the sheath, it is not necessary to cement or cast in the heater which is imperative for round cartridge heaters. Unlike tubular heaters which are also available in square sections (see chapter Flexible Heating Pipes), the square cartridge heaters have the termination on one side and can be loaded with 16W/cm² (2.5W/in²) due to their special inside construction.

This deflectable pneumatic spindle is capable of compensating part and positioning tolerances when machining. This means that it is possible to trace a part contour with constant pressure and achieve uniform removal, even under fluctuating conditions. An optimum application for this system is, for example, the automated deburring of castings or machined components using an industrial robot. Adaptor flange (Order no. 003 012 557) to simplify the mounting of the system is available directly from us. The deflection force is individually infinitely adjustable using air pressure (2-6 bar), even during processing. This enables the removal rate to be perfectly adapted to the thickness of the burr. After deflection the pressurized air piston always returns the tool to the zero position against a positive stop. Hysteresis zero.

The aluminium pressure die-cast protective shroud (F3: aluminium sand casting) fully shields the pedal at the top and sides while the wide base provides a high degree of stability. It reliably prevents accidental operation from above by falling objects or careless operation from the side. Due to its robust construction the protective shroud withstands a drop of 20 kg from a height of 1 m. The foot switch is uniquely designed to allow inclusion of additional equipment: — Emergency Stop button — Contactor on DIN rail as main power switch — Customized installations (e.g. light indicators)

METAL SERVICE OUTLET Closed stainless steel service outlet Ideal for use in schools or public areas This service outlet is tough. Its carpet protection frame and hinged cover are made of stainless steel, while the installation frame and the solid, 3 mm thick pressure absorption plate in the cover are made of galvanized sheet steel. This makes the insert even more robust than the previous model with plastic base. The service outlet is ideally suited for use in schools or public areas, as its resistant material offers optimum protection against vandalism and the toughest use. The device casings for the installation of power, data and multimedia technology can be lowered by a maximum of 35 mm in the insert frame. Vandal-proof Grounding without PE wire High-quality stainless steel design

The family of UDHOME complete units can position power, data and multimedia connections exactly where they are required. Floor sockets and floor boxes of the UDHOME family are mounted directly on the raw floor or the screed and connected with flexible installation pipes ‒ it couldn't be simpler. Thanks to their elegant, discreet design, the UDHOME floor sockets and floor boxes integrate themselves seamlessly into the interior architecture. When the hinged lid is closed, only the high-quality surfaces of solid brass or pure stainless steel are visible. Thanks to their stable construction, the floor sockets and floor tanks are also resistant to the everyday loads in homes, offices and administrative areas. The and UDHOME9 floor boxes are the perfect solution for dry-care floor coverings and also stand out through a large range of equipment. The floor boxes offer a lot of space for the installation of power, data and multimedia connections.

The family of UDHOME complete units can position power, data and multimedia connections exactly where they are required. Floor sockets and floor boxes of the UDHOME family are mounted directly on the raw floor or the screed and connected with flexible installation pipes ‒ it couldn't be simpler. Thanks to their elegant, discreet design, the UDHOME floor sockets and floor boxes integrate themselves seamlessly into the interior architecture. When the hinged lid is closed, only the high-quality surfaces of solid brass or pure stainless steel are visible. Thanks to their stable construction, the floor sockets and floor tanks are also resistant to the everyday loads in homes, offices and administrative areas. The and UDHOME9 floor boxes are the perfect solution for dry-care floor coverings and also stand out through a large range of equipment. The floor boxes offer a lot of space for the installation of power, data and multimedia connections.

METAL SERVICE OUTLET Closed stainless steel service outlet Ideal for use in schools or public areas This service outlet is tough. Its carpet protection frame and hinged cover are made of stainless steel, while the installation frame and the solid, 3 mm thick pressure absorption plate in the cover are made of galvanized sheet steel. This makes the insert even more robust than the previous model with plastic base. The service outlet is ideally suited for use in schools or public areas, as its resistant material offers optimum protection against vandalism and the toughest use. The device casings for the installation of power, data and multimedia technology can be lowered by a maximum of 35 mm in the insert frame. Vandal-proof Grounding without PE wire High-quality stainless steel design

The main function of a hydraulic lange coupling (hereinafter called FKH) is the safe connection of two shafts. For example, between a drive shaft and a transmission shaft. The FKH produces a rigid and backlash-free connection between the shafts. This connection is mainly used to transmit torque, but can also absorb bending moments. The FKH is located in the power low. It is installed by sliding the FKH onto the shaft and the subsequent tightening of the hydraulic system. By using conical surfaces the inner diameter reduces and the radial pressure is built up. After clamping the FKH will be locked mechanically and the hydraulic pressure will be removed. Due to this simple approach, the FKH is suitable for repetitive clamping operations. Advantages of the FKH: • high transmittable torque and bending moments (high friction) • application-speciic design/customization • easy mounting and adjustment because of clearance it • relatively low pressure (closed system) • very rapid...

GLOBALFLEX®-H05VV-F conrol cables have been successfully used or many decades as measuring and control cables in tool machinery, plant installation, power stations and in data equipment. GLOBALFLEX®-H05VV5-F control cables are used for forced movements in dry, moist and wet rooms (also water-oil-mixtures) but not suitable for outdoor. Extremely flexible, the GLOBALFLEX®-H05VV5-F control cables are particulary suitable for laying where there is free movement. The product correspondents to the directive 2014/35/EU (low voltage directive). EN 50525-2-51 / VDE 0285-525-2-51 approved CCC approved EAC (GOST) approved

Harmonic distortion is a key issue not only in low voltage, but also medium and high voltage Power Factor Correction. The installation of detuning reactors helps to protect capacitor installations from dangerous and devastating resonances by preventing any amplification of harmonic currents and voltages caused by resonance between capacitors and inductances in the mains. At the same time, it reduces the overall level of harmonic distortion in the mains. With FKD-MVTM, we are now expanding our long-year experience in making reactors for low-voltage PFC to the field of medium voltage up to 10kV. The low-loss reactors which are made of aluminium windings on iron cores, are optimized for use with our MSDTM capacitors. Each reactor is formed by a set of three compactly sized single phase units; that makes handling easier during mounting and maintenance and opens interesting options for allocation and dimensioning of your equipment.

KLN ultrasonic generators are incorporated in cleaning tanks of various capacity from some liters up to several cubic meters. They have a high operating reliability also under extremely difficult application conditions. Based on decades of experience in developing ultrasonic generators today we have a broad variety of generator series, meeting the most various requirements concerning frequency, way of installation and output power.

Fuel cells can be integrated into our modular and scaleable H2 Core systems and complete them in case of the easy and reliably conversion of the produced hydrogen back into electricity. They are available in several power output levels.

The tank serves as a reservoir for demineralized water and supplies up to 11 AEM electrolysers. A conductivity sensor provides the supply of the electrolysers with <20µS. Capacity 38 L Max output water flow 3.8 l/min.

The Dryer is a hybrid temperature/pressure swing adsorption system which is easily to integrate in one of our H2 Core HydroCab or Cluster system. By using the dryer DRY 2.1, the hydrogen purity can even be increased to 99.999%.

The liquid cooled version of Enapter´s patented anion exchange membrane (AEM) electrolyser. The modular design – paired with advanced software integration allows set up in minutes and remote control and management. Stack this electrolyser to achieve the required hydrogen production rate. Use waste heat from the system to increase your efficiency

Enapter’s patented anion exchange membrane (AEM) electrolyser is a standardized, stackable and flexible system to produce onsite hydrogen. The modular design – paired with advanced software integration – allows set up in minutes and remote control and management. Stack this electrolyser to achieve the required hydrogen flowrate.,

Enapter's AEM Multicore combines up to 420 modular AEM electrolysers and produces megawattscale green hydrogen.The production and supply of hydrogen is reliable, fast and costefficient.

The HydroCluster is a plug and play solution for medium sized H2 demands. It is the solution to integrate Enapters and other 19” modules to a complete standalone system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h. The output volume of every electrolyser can be set between 60% and 100%. The HydroCluster combines up to 60 modules to a single plug and play system. Optional Dryer modules can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. For extreme temperature ranges heating and cooling systems can be added accordingly For detailed information and technical support. Contact us!

The HydroCab PowerCore is the complete energy storage system combining benefits of hydrogen and battery systems. It is a short and longterm energy storage system. The modularity enables the design of the best system for your demands. The system is designed for an easy plug and play installation. The PowerCore can be delivered in a water cooled or air cooled version. Also ask us for outdoor or IP55 versions with an exhaust connection. Optional compressors and gas storage solutions complete the system. We also offer the installation and commissioning on site.

The outdoor version of the H2 Core Hydro Cab is a plug and play solution for small and medium sized H2 demands. It is the solution to integrate Enapters and other 19” modules to a complete system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h. The output volume of every electrolyser can be set between 60% and 100%. The Hydrocab combines up to 4 modules to a single plug and play module. An optional Dryer module can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. A Water Tank Module can be installed and stores 38 l of deionized water. It is equipped with a pump which provides the needed supply pressure or the electrolyser modules. The WTM takes the space of one electrolyser and is needed when no direct water supply can be provided. Also it is recommended when more than one cabinet will be installed parallel.

The H2 Core Indoor HydroCab is a plug and play solution for small and medium sized H2 demands. It is the solution to integrate Enapter and other 19” modules to a complete system. Every Enapter Electrolyser is capable to produce up to 0.5 Nm³/h of hydrogen. The output volume of every electrolyser can be set between 60% and 100%. The HydroCab combines up to 5 modules to a single plug and play module. An optional Dryer module can increase the purity from 99.9% to 99.999%. The optional Water Purification System (WPS) can provide the needed water with the quality of < 20 µS/cm. A Water Tank Module (WTM) can be installed and stores 38 l of deionized water. It is equipped with a pump which provides the needed supply pressure or the electrolyser modules. The WTM takes the space of one electrolyser and is needed when no direct water supply can be provided. Also it is recommended when more than one cabinet will be installed parallel.

KURO cable protection pipes made of unplasticised PVC-U are ideal for the pressure-free underground installation of power and telecommunications cables. They also ensure perfect protection against all kinds of mechanical damage when used as cable protection pipes. HERE‘S HOW YOU BENEFIT: - Manufacture according to DIN 16873 and 8061/8062 - Advanced integral ring seal socket technology with permanent seal and long socket

KURO cable protection pipes made of unplasticised PVC-U are ideal for the pressure-free underground installation of power and telecommunications cables. They also ensure perfect protection against all kinds of mechanical damage when used as cable protection pipes. HERE‘S HOW YOU BENEFIT: - Manufacture according to DIN 16873 and 8061/8062 - Advanced integral ring seal socket technology with permanent seal and long socket