Planks - Import export

Let your products exude elegance and durability with our boards that seamlessly blend aesthetics with resilience. Whether your projects are destined for interior or exterior design, our boards will provide you with the natural beauty that captivates every beholder.

Paulownia plank or sawn wood: the planks can be made in different thicknesses.

SHERA plank is a unique fibre cement composite of natural fibres bonded tightly in a high-grade silicate structure. This autoclaved wood-grain siding acquires impressive toughness, yet remains flexible and dimensionally stable. It is cellulose cement plank that contains absolutely NO asbestos fibre, no fibre glass fibres nor formaldehyde. SHERA Plank comes in square cut edge or shiplap edge. Benefits: - Weather Resistant - Do not rot - Easy to maintain - Easy installation - Fire resistant - Flexible - Low shrinkage - High workability - Insect resistant - No asbestos SHERA Plank is the perfect fibre cement plank for use in exterior siding applications such as cladding houses that face a constant threat from weather, insects and water damage since it possesses excellent properties of pest resistance, impact strength and water/moisture resistance. It comes in several sizes and textures and primed planks can be coated before or after installation (double coating).

One of the main activities of the company is the production of edged and unedged sawn timber from coniferous (pine, spruce) and deciduous species (birch, aspen, alder) wood on modern imported equipment, which allows us to produce sawn timber of various sections and high quality. The quality of all softwood lumbers fully complies with GOST 8486-86, and quality of all hardwood lumbers complies with GOST 2695-83. We offer a wide range of edged and unedged sawn timber of coniferous and deciduous species of various sizes and grades, and we also work for the Customer and are ready to produce high-quality sawn timber according to the dimensions received from the client in the shortest possible time.

Filter Grade: G2,G3,G4(EN779), EU2,EU3,EU4(EUROVENT) Filter object: particles ≥5μm High temperature resistance: polyester fiber is less than or equal to 00DEG C , glass fiber is less than or equal to 300℃ Humid tolerance (relative humidity): ≤100%RH Filtration efficiency : 75%,85%,95% (ASHRAE52.1-1992) Instantaneous temperature : polyester fiber is less than or equal to 120 DEG C , glass fiber is less than or equal to 350 ℃ Applictation: Used for clean room conditioning system, pre-filtration through fresh air venting units, and exterior air conditioning connection Primary filtration of central air conditioning system Pre-filtration at the intake of Air purification equipment . Primary filtration in a filtration system Ventilation system for outdoor and other harsh environments Pre-filtration in Ventilation system for outdoor fire-proof and high temp resistance working condition

We can offer you a range of trapezoidal and profiled sheets for roof and wall in various lengths and colour finishes. Here you can find our list of trapezoidal and profiled sheets. In addition, we are able to provide sheets in wood-look finish, which are often used in agricultural uses. On request, we can offer you the full range of sheets produced new to your requirements in dimensio and RAL-colour tones. We are also able to offer you special offers and returned orders.

The perforated metal planks, type BN-O33 “Noppe, offen” combines top and bottom pressed nubs with a hole diameter of 8 mm: This provides excellent stability and drain holes for a good drainage effect. In combination with the profile BN-O33vi for steps with vi-nosing or the closed profile BN-G33 it results in many applications and variations.

The perforated metal plank type BZ offers a high degree of slip resistance due to its serrated surface structure. For this reason, the BZ plank is especially suitable in those environments, where fats and oils are used.

The perforated metal planks, type BN-G33 “Noppe, geschlossen” has upwardly pressed closed nubs and provides a high slip resistance. BN-G33 is suitable for indoor in combination with BN-G33vi stairtreads. BN-G33 is suitable for areas where on the one hand a closed surface is desired and on the other hand a good accessibility must be guaranteed.

The perforated metal plank type BZ-GP has been developed from our approved planking type BZ-GP. Because of the homogeneous surface it is easy to negotiate. Furthermore the free cross section of 70 % makes a high light permeability and sprinkler suitability possible. Therefore the profile is particularly suitable for suspended ceilings. There is no need for sprinkler systems below the suspended ceiling. Due to the high point loads, additional planking during the assembly or later is not necessary. Thus, an ideal smoke funnel, sprinkler suitability and efficiency are guaranteed.

The perforated metal plank type BN-OD „Noppe, offen , different“ is characterised by two different hole sizes. The bothsided punched holes have upwards a diameter of 14 mm and downwards a diameter of 7 mm.

The perforated metal plank type BN-OP5 “Noppe, offen plus, 5mm“ was especially developed for pedestrian areas with „High Heel Proof“ requirements. The bothsided punched holes have a diameter of 5mm. The punching sequence corresponds to BN-OP7. This type of planking offers high slip resistance and also allows ladies in stiletto heels to walk safely on the gratings. Due to the small hole configuration it is difficult to see through from underneath, which is important in public access areas. The perforated metal plank type BN-OP8, corresponds to type BN-OP5 in terms of the punching pattern, but have twice the number of holes. The drain holes have a diameter of 8 mm and thereby increase the drainage performance and light and air permeability..

The perforated metal plank BZ-Gv “Zahn, groß, verkehrt” offers a free cross section of at least 70%. It is therefore suitable for use in intermediate levels. Through the use of BZ-Gv profiles, the there is no need for a sprinkler system below these intermediate levels. Optimal flue exhaust and sprinkler suitability are thus guaranteed.

Perforated metal planks, type BP-UE are characterized by the highest slip resistance class, their smooth line profiling and high loading capacity. For this reason this type is frequently used in slippery areas and where stringent demands are made on load bearing capacity.

The perforated metal plank BZ-G offers a free cross section of at least 70%. It is therefore suitable for use in intermediate levels. Through the use of BZ-G profiles, the there is no need for a sprinkler system below these intermediate levels. Optimal flue exhaust and sprinkler suitability are thus guaranteed.

Perforated metal planks, type BP-oN is very interesting for shelving areas, due to the smooth surface without holes or nobs. The type BP-oN is especially interesting for cantilever rackings based on its wide free span.

Perforated metal planks, type BP “parallel”, are characterised by their smooth line profiling and high loading capacity. For this reason this type is frequently used when large areas have to be covered in industrial areas and where stringent demands are made on load bearing capacity. This type can also be supplied without holes and is therefore ideal for use in the shelving construction sector.

With perforated metal planks, type BN-O “Noppe, offen“ the bothsided punched holes have a diameter 8 mm and allows an excellent standing stability. Furthermore the drain holes exhibit good drainage. The BN-O grating guarantees a high stability for normal pedestrian traffic.

The surface of the perforated metal plank, type BN-GA is a mix of closed punched nobs facing upwards and conical drain holes facing downwards. This means that the grating does not have any sharp edges on top and can be walked on easily even without footwear. At the same time, however, any liquids can be quickly drained through the conical drain holes so that no hydroplaning can occur.

The perforated metal planks, type BN-G “Noppe, geschlossen”, the punched nobs pressed upwards are closed and offer high slip resistance. BN-G gratings are often used in indoor environments and there, where, on the one hand, a closed surface is desired and on the other, good accessibility must be ensured.

Reference : B36 Dimensions : 9x5cm Packing : 40pcs - st. Material : bambou Sales unit : 3

SHERA Floor Planks - perfect exterior decking material SHERA Floor planks are the ideal material for interior or exterior decking applications on a variety of building types from villas to hotels and offices to shopping malls. Tough yet beautiful, these planks look like real wood yet are extremely tough, water resistant, rot proof, fire resistant and come in pre-primed and colour through, wood like colours. SHERA Floor Plank comes in the following formats: Pre-primed Coloured using colour through painting Different thicknesses Different widths Including planks with groove lines Colour Through, Painted Format SHERA Floor Plank comes in four wood like colours, in ‘colour-through’ format, resulting in less of a need for touch ups and repairs when planks are subjected to heavy foot traffic.