Particle filter - Import export

Our inline filter is intended for pipeline installation. It is small, compact and low cost. It is easy to replace under practical conditions and can be subsequently retrofitted with no problems. They are also suitable for a variety of applications in different sizes and materials.

The coalescence cartridge filter are compact, economical and versatile available either as a particle or as a coalescence filter. They are easy to use and filter changes can be made quickly. The cartridge filters are fitted with an internal thread and are also available with a shut-off or drain feature.

The ViraClean is a high-efficiency in-line dirt trap, suitable for use on heating and chilled systems. Corrosion is a process that is difficult, if not impossible, to stop once it has begun. Corroded metal becomes dislodged and becomes water-borne debris. This debris, along with other contaminants in the system, clogs heat exchanger channels, fouls filters, and causes excessive wear in circulating pumps. Effective removal of debris is essential for increasing the operational life of the system as a whole.

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. In our powder paint booths with filter, the air is sucked through the filters while the unused powder particles are held by filters. The filters are automatically and periodically pumped air in reverse direction to direct the powder paint that held by filters to the sieve tanks which is under the cabinet for reusing. As a result of this process, the unused powder paint is recycled. Polyester-Teflon and Sinter-Lamellar type filters are used in our booths. Polyester-Teflon filters are preferred due to their low cost and Sinter-Lamellar filters are preferred due to their long filter life. Both types offer efficiency with recycling systems, economical solution

Medizer qzer color series 5 layer best FFP2 mask yellow 5 ply and Breathable 5 ply layers can better block the small particles in air and filter it, reduce the mugginess for wearing mask. Considerate design embedded nose clip can help fit the nose bridge, reduce the fogging on the eyeglasses. Elastic ear loop high elastic ear loop, pose less press to ears and face, avoid the uncomfortableness from longtime use.Multilayer 5ply disposable procedural face mask.piece for best fit. 100% Fiberglassfree 5 PLY Non woven material Latex Free.5 ply Breathable Dust Protection Masks,Elastic Ear Loop Filter Mask .

Patterned surgical mask premium filter protects against 99% of particles larger then 0.3 μm, filter Efficiency = PFE 99%. For home, school and outdoors and personal needs. The production of every mask is zerocontact and dustfree. Ensure that the mask is clean and hygienic. The user can use it directly after receiving it.They are comfortable to wear and the advanced multilayered fabric facilitates easy breathing while limiting exposure to potentially harmful toxins.

Meltblown street art patterned face mask Premium Filter protects against 99% of particles larger then 0.3 μm, filter Efficiency = PFE 99%. For home, school and outdoors and personal needs. Full reports available upon request. Comfortable elastic earloop, extrasoft ear loops eliminate pressure to the ears. The production of every mask is zerocontact and dustfree. Ensure that the mask is clean and hygienic. The user can use it directly after receiving it.

Meltblown fushsia best quality surgical mask disposable mask with elastic ear loop, pose less pressure to face and ears. Embedded nose clip is easy for fixing and adjusting to your nose bridge. Surgical masks are made in different thicknesses and with different ability to protect you from contact with liquids. These properties may also affect how easily you can breathe through the face mask and how well the surgical mask protects you. The meltblown fabric is always the core. It is the middle layer of the mask, has electrostatic adsorption function, can filter particles, bacterial and viruses.

Kids series meltblown colorful teddy bear patterned best 3 ply mask light weight, comfortable, durable & stretchable straps with dual point attachments, ensuring reliable protection. Highquality elastic ear bands are comfortable to wear for long periods . Advanced skinfriendly nonwoven fabric provides easy breathing for long hours and high efficiency in filtering out particles. Prevent Dust Infection Effectively Or Inhale Contaminated Air,Protect Your And Your Family's Heath. Suitable for children and small adult faces for daily travel ,kindergarten, daycare, Food Service, Schools, Indoors & Outdoors. No Fog.

Meltblown HiBro Patterned Surgical Mask designed for nonmedical use, these disposable masks come in all kinds of colours and in both kids and adult sizes. The mask is made of 3 layers of highquality nonwoven fabric. 3 ply layers can better block the small particles in air and filter it, reduce the mugginess for wearing mask. Considerate design embedded nose clip can help fit the nose bridge, reduce the fogging on the eyeglasses. high elastic ear loop, pose less press to ears and face, avoid the uncomfortableness from longtime use.

Patterned surgical mask designed for nonmedical use, these disposable masks come in all kinds of colours and in both kids and adult sizes. The mask is made of 3 layers of highquality nonwoven fabric. 3 ply layers can better block the small particles in air and filter it, reduce the mugginess for wearing mask. Considerate design embedded nose clip can help fit the nose bridge, reduce the fogging on the eyeglasses. high elastic ear loop, pose less press to ears and face, avoid the uncomfortableness from longtime use.

Meltblown colourful tree patterned medical mask designed for nonmedical use, these disposable masks come in all kinds of colours and in both kids and adult sizes. The mask is made of 3 layers of highquality nonwoven fabric. 3 ply layers can better block the small particles in air and filter it, reduce the mugginess for wearing mask. Considerate design embedded nose clip can help fit the nose bridge, reduce the fogging on the eyeglasses. high elastic ear loop, pose less press to ears and face, avoid the uncomfortableness from longtime use.

INOX intensive particle filter rinsing removes all soot residues and soiling in the particle filter. The rinsing liquid cleans gently and can safely be used on aluminum, magnesium, zinc and cadmium parts. The product is ideally suited for the latest generation of particle filters and is therefore suitable for all diesel particle filters. It is easily biodegradable and has significant cost advantages compared to installing a new filter!

INOX high-performance diesel particle filter cleaner is the most economical way of maintaining and cleaning particle filters! It can be used in all diesel engines and can be mixed with all diesel fuels whereby the filter is cleaned while the vehicle is in motion. The filter cleaning takes place without any additional installation or removal practices, without downtimes and without malfunctions.

KN95/N95 Filter Mask reduces the risk from Bacteria. Lab tested and clinically proven to prevent the risk of infection. Filters out 99.9% of bacteria, dust, chemicals, particles, pollen and smoke.

The sieve bend screen – also called bend screen – comprises a curved screen for filtration. The bend screen filters by guiding the particles along with the curved sieve filter screen. The shape of the sieve bend screen offers high filtration because of the forces exerted from the particles in the flow over the sieve bend. Thus, it is used for different applications by benefiting from the bend screen geometry. Advantages: High filtration performance Customized bend screen design Corrosion resistance Durable – long service life Precise open gap High capacity compared to panel wedge wire screen Applications With the advantages of the bend screen geometry, they are used in different applications as a filtering element. Mining process Water treatment Food processing Particle filtration Coal removal Stainless steel with different grades and different materials can be used. Also, Special surface treatments are available for your application.

The sieve bend screen – also called bend screen – comprises a curved screen for filtration. The bend screen filters by guiding the particles along with the curved sieve filter screen. The shape of the sieve bend screen offers high filtration because of the forces exerted from the particles in the flow over the sieve bend. Thus, it is used for different applications by benefiting from the bend screen geometry. Advantages: 1-High filtration performance 2-Customized bend screen design 3-Corrosion resistance 4-Durable – long service life 5-Precise open gap 6-High capacity compared to panel wedge wire screen Applications: 1-Mining process 2-Water treatment 3-Food processing 4-Particle filtration 5-Coal removal Stainless steel with different grades and different materials can be used. Also, Special surface treatments are available for your application.

Therapy Air®Smart uses 360° multi-stage filtration system which allowws purified air to be quickly distributed in all corners of the 71m2 indoor space. Thanks to its three-dimensional circulation system, the air will be purified no matter where you place the device. Presentation The unique 360° integrated triple-layer filter consists of primary pre-filter, H13-grade HEPA filter and activated carbon filter that completely eliminate inhalable particles such as bacteria, viruses, allergens and other pathogens. PRE-FILTER WITH SILVER NANO PARTICLES: eliminates large particles such as dust, mould, hair, dandruff, pet hair, etc. so the other filters can work at full power and last longer. It also has strong antibacterial properties due to silver nano particles. CARBON FILTER: Contains 400 g of coconut shell charcoal which has the highest density of micropores.

Effectively reduce pneumatic equipment noise Engineered to provide an optimal balance between noise reduction and acceptable backpressure in the pneumatic system, our porous plastic silencers offer numerous advantages over metal acoustical silencers. Our porous plastic silencers are designed with a significantly lower weight along with greatly improved corrosion resistance and the ability to filter particles and aerosols. This leads to greater durability, assembly speed and cost-efficiency for our partners. Designed with a solid integrated threaded adapter to ensure easy mounting on pneumatic equipment, our silencers: Fit most standard valves – Offered in an extensive selection of sizes designed to fit most standard valves, including NPT, BSP, M5 and “push-in” styles. Enhance equipment longevity – Effectively filters particulates and aerosols. Reduce pneumatic equipment noise – Engineered with a porous plastic structure, offering greater noise reduction compared to metal and...

In various ventilation applications in the industry, recycled process air can contain particles generated from the production which can contain electrostatic charges. When filters catch these particles during the circulation, they also absorb the electrostatic charge in the filter media and frame. In addition, if there is a source for explosive gases or aerosols in the atmosphere, with the help of the sparks created by the filter due to electrostatic discharge, there might be serious risks of fires or even explosions. Therefore, filters used in these kinds of environments have to be Ex-Proof. In order to avoid explosion risks, the European Commission declared ATEX Equipment Directive 2014/34/EU. Mikropor filters are manufactured according to 2014/34/EU and additional supporting directives issued by the EU.

Filtering plant FTC-AS 6.Bd is designed for the complete set of machines for thermal metal cutting. Productivity – 6 000 m³/h. It is installed using modular panels, which provides a modular structure of the installation. The installation is made of 2 mm thick steel with subsequent powder coating. The fan unit is located in a noise-absorbing housing. Contaminated air containing waste particles obtained during production is transported to the filtering plant and the heavier particles in the settling chamber fall into the dust collection compartment of the unit, while the air containing small light particles is filtered in cartridge filters with a PTEF membrane . The installation performs fine filtering. Cartridge filters with a PTEF membrane provide fine filtration of air with a size of solid particles from 0.3 microns, the degree of air purification is 100%, which makes it possible to return purified air to the workshop.

The productivity is a 10000 m³/h Setting can alGathers with the use of module panels, that provides the modular construction of setting. Setting is executed from steel in thick a from 2 to 3 mm with the further powder-like painting. Muddy air, that contains the particles of the wastes got during a production, is transported in a chamber where more heavy parts settle, whereupon muddy air gets to the filter block where the final cleaning is. The cleared air returns back in a working zone. The filtered particles going to the container or big-beg depending on acquisition The filter setting can purge air from particles a size from 0,3 мкм. In a standard is completed the Anti-static cartridge filter of C2.1000.10.ANT This filter is able to catch more shallow factions of dust, than baghoses, and intended for cleaning of air from finely dispersed of dry particles that does not stick togso be used hours in different industries subject to condition plenty of particulate matters in muddy air.

The machine is designed for cleaning, degreasing, chemical treatment of the outer layer and blowing of small components. The parts are arranged in trays with dimensions 600x400x70-150 mm. Two washing zones – pre-washing zone and zone for main washing. After each washing zone there is zone for blowing. The pre-washing zone has an external band filter, which is with the possibility of processing a high volume of washing solution and captures particles of a size greater than 350 μm. The band filter cleaning the washing solution of oil and hard dirt. The mainly washing zone has a column bag filter, which captures particles of a size greater than 50 μm. Both filters have monitoring systems for the degree of soiling and in case of clogging the machine stops. Automatic dosing of the cleaning agent. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- and USDA regulations.

The machine is designed for cleaning and degreasing of cylindrical and heavy parts with total length up to 4500 mm and diameter up to 150 mm. Each part is placed on a trolley and loaded inside the chamber of the machine. The cleaning process is carried out by seven nozzle collectors – six rotating and one moving up/down. The machine provides a combination of fully automated and manual cleaning. The dosing of the detergent is manual. The washer is equipped with a filter that catches particles with dimensions larger than 250 μm. There is mounted a fan for exhausting of the vapour and lighting inside the washing chamber. The machine body is made entirely out of stainless steel, material EN 1.4301 / AISI 304. The equipment complies with the high CE- Requirements and EU – and USDA regulations.

Canaletas recommends using an active carbon filter to enjoy a high quality of drinking water. This filter removes bad tastes and odors that may be present in the water, such as chlorine and small particles or organic material. FILTERS FOR DRINKING FOUNTAINS Canaletas has selected these filters for the drinking fountains for their durability and filtering capacity. Models: M105 Plastic housing and cartridge C115. Maximum working pressure 8 Kg. / cm³. Water connection ½ inch. M115 Stainless steel housing and cartridge C115. High pressure tested up to 21Kg. / cm³ (especially with sudden increases in water pressure). Water connection ½ inch. REPLACEMENT CARTRIDGE Replacement for filters M105 and M115 Active carbon block filter with a 5µm and a working life of approx one year.

AAF compressed air filters are designed for the protection of the downstream compressed air system and equipment with lower airflows against defects and other failures. They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 5 different grades of filter elements (P, R, M, S and A). Optional internal and external condensate drains should be used for efficient condensate draining from the filter housing.< /br> <b>Features</b> <ul> <li>A wider range of different models for different flow rates, including larger 2” and 3” sizes. </li> <li>Convenient design for assembly of several filters and for wall mounting</li> <li>AVELOCK antivibration element lock system<li> <li>Needle felt drainage layer instead of foam for improved thermal resistance<li> <li>X2-COAT internal anti-corrosion protection<li> </ul>

ceiling filtration at spray booth, standard industrial spraying system, air clean system pre-filtration, flow decentralization at ventilation system. Filter material and features: Elevated density polyester fiber with combed mesh via hot wind, counter flow side reinfored by net or cloth, full glued. Certified EN779 Anti-humidity: 100% r.F. Temperature resistance: 80℃/176℉ Non-flammablility, self-extinguishing conform to DIN53438 F1 Filter particles: ≥1μm Served in roll or piece Options available: Filter Media F5/M5, 20m x 1.6m x 20mm Filter Media F5/M5, 14m x 1.6m x 20mm

Filter Grade: G2,G3,G4(EN779), EU2,EU3,EU4(EUROVENT) Filter object: particles ≥5μm High temperature resistance: polyester fiber is less than or equal to 00DEG C , glass fiber is less than or equal to 300℃ Humid tolerance (relative humidity): ≤100%RH Filtration efficiency : 75%,85%,95% (ASHRAE52.1-1992) Instantaneous temperature : polyester fiber is less than or equal to 120 DEG C , glass fiber is less than or equal to 350 ℃ Applictation: Used for clean room conditioning system, pre-filtration through fresh air venting units, and exterior air conditioning connection Primary filtration of central air conditioning system Pre-filtration at the intake of Air purification equipment . Primary filtration in a filtration system Ventilation system for outdoor and other harsh environments Pre-filtration in Ventilation system for outdoor fire-proof and high temp resistance working condition