Motor fix - Import export

Uniline System is a family of pre-assembled linear units boasting a compact size and high speed ensured by the COMPACT RAIL roller bearings, mounted on a self-sustaining extruded aluminum profile. The linear units are driven by a steel reinforced polyurethane belt system. The horizontal seals and the raceway cleaners fitted on both ends of the carriage ensure full protection from dirt. The linear actuator profile is compatible with an endless number of widely available standard fixing accessories. The motor can be connected to the units by means of a full or a hollow shaft Up to 3,000mm strokes Sizes from 40 x 51.5mm up to 100 x 122.5mm Versions available with long sliders and multiple sliders Using linear rails from the COMPACT RAIL family ensures excellent performance in terms of speed and life. The rails in the linear axes of the four product series are laid out in different combinations to meet all application requirements. Using long or multiple sliders increases the...

MOTORIZED STANDARD CONVEYOR TAPES WITH FIXED SPEED Motorized conveyor tapes are made of a structure in painted steel section with adjustable height supports and a smooth pvc carpet and a smooth pvc carpet moving on a sheet plane. They are used for the transport of boxes and packages in industrial and productive setting. They can be combined with weighing systems, counting, inkjet markers and used as transport systems and sorting boxes. If properly designed can also transport up/down hills. Complete with motors of adequate power, electrical system and start/stop switch. The geared motor unit is installed inside of the supporting structure to limit the overall dimensions. The PVC carpet is full of guides and has the metal junction to make easier the disassembly, the cleaning and the maintenance. The speed of tape is fixed so it cannot be regulated.

The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings. The pump kit consists of pump with motor, 2 m hose and hand nozzle. Product attributes: - Sealless in the liquid area - With mains connection - Powerful commutator motor with brushes - Ergonomic design handle - Low weight - Small outer tube diameter - Holding hook for hand nozzle at pump discharge - With integrated holder for the pump Benefits: - Also suitable for transferring smaller quantities - Can pump out of narrow-necked containers - Minimal force required to change drums - With mains connection - enables very long operating times - High operational safety due to overload cut-out switch - Easy single-hand operation - Hand nozzle always quickly at hand due to holding hook - Low storage space required

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap machine frame from aluminium profile indexing transport system for jars horizontally working conveyor for jar infeed and discharge position control for jars in indexing rotary transport dosing pump from 1.4404 10 l hopper with level control filling nozzles driven by LinMot-e-motor pick and place system for pre-cut foils from magazines driven by LinMot-e-motor 1 spot sealer to fix the foil at the sealing rim of the jars sealing system with conduction sealing head capping station with LinMot-e-motor infeed conveyor for caps electric cabinet with operation panel manual central lubrication system safety doors with aluminium profile frame and windows from makrolon

CLAMPING DEVICES FROM THE EXPERTS. SAMAG OFFERS PROCESS-OPTIMIZED SOLUTIONS AND A COMPLETE ALL-ROUND SERVICE WHEN IT COMES TO DEVICE CONSTRUCTION. Complete machining of workpieces begins with the right clamping concept. Our engineers develop innovative solutions and clamping devices at the highest technical level. Processing complicated workpieces in efficient cycle times requires process-optimized clamping. We deliver technological solutions with longevity and all-round service. The workpieces are aligned, fixed and clamped hydraulically, pneumatically or mechanically. If several parts are processed at the same time, depending on the number of motor spindles, high-precision fixing, positioning and clamping of the parts is necessary. This is only possible with automated tensioning (e.g. hydraulic) and precise alignment of the devices.

The Galleon Race ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail, connected to a central rotor by radial arms (sweeps). The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. The ride moves by means of 1 self-braking A.C. gear-motor fixed to the central rotor and controlled by Frequency Drive.

The Matterhorn ride consist of a circular development track with depressions and two “cat’s back”. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail, connected to a central rotor by radial arms (sweeps). The cars swings due to centrifugal force during rotation of the ride. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The ride moves by means of one self-braking A.C. gear-motors fixed to the central rotor and controlled by Frequency Drive.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twenty cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 5 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

The Musik-Express ride consists of a circular development track with depressions and three cat backs. The rail is supported by a steel horse structure, connected to the central body by radial longeron and tie rods. The whole metal structure is hot-dip galvanised. Twelve cars run along the rail and are connected to a central rotor by radial sweeps. The foot-boards approaching the cars consists of an aluminium tread plate. All electric and pneumatic equipment is fitted inside the central body, on which the central rotor is fixed. All decorative panels are coated with aluminium sheet. Electronically operated lighting is composed of cabochons. The covering canvas is made of fireproof material (class 2) and panelling of the cars are fibreglass made. The cars are moved by 3 self-braking AC motors fixed on the ends of the radial sweeps and controlled by Frequency Drive.

Integrated plant to cut and stock precut bars made of fast automatic straighteners with rollers (such as RETA) and coil processing up to Ø 20 mm. Pulling speed up to 300 m/min. The plant is fully customizable and modular thanks to a wide range of available accessories. Fast Coil change patented system of automatic horizontal wire change (Optional); Straighteners (horizontalvertical) with electronic and independent setting for double wire feeding; Cutting with Brushless motors with adjustable wire guide, fixed and mobile cutting blades; Rollers for the extraction of the last part of the coil; Teleassistance.

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap • machine frame from aluminium profile • indexing transport system for jars • horizontally working conveyor for jar infeed and discharge • position control for jars in indexing rotary transport • dosing pump from 1.4404 • 10 l hopper with level control • filling nozzles driven by LinMot-e-motor • pick and place system for pre-cut foils from magazines driven by LinMot-e-motor • 1 spot sealer to fix the foil at the sealing rim of the jars • sealing system with conduction sealing head • capping station with LinMot-e-motor • infeed conveyor for caps • electric cabinet with operation panel • manual central lubrication system • safety doors with aluminium profile frame and windows from makrolon

Politubes, in conjunction with DuPont, has developed a special spiral-wound tube made of heat-shrinkable polyester (Mylar HS), which enables automated fixing of permanent magnets, thereby reducing the cost of assembling these motors.Important advantages are: 1.Unlike very expensive steel rings, the spiral-wound tube also wraps around and protects the ends of the magnets, which are also subject to corrosion. 2.The trimming that often has to be done during the assembly process when using rigid rings is avoided; the Politubes spiral-wound tube adheres perfectly to the magnets, taking their shape and protecting them from cracking and scratching; this also guarantees perfect balancing of the rotor. 3.Part of the assembly process is removed, since potentially costly and often manual bandage with tape impregnated with epoxy resins can be eliminated; this avoids as well lenghty resin activation time in oven; productivity is thereby increased and hidden production costs reduced.

Italian motor Ametek, Fixed/regulated speed and stainles steel Blade Monofase Blender arm length 300/350/400/500/600 mm Electric 220 V. 1N 250 Watt CE Declaration Made in Turkey