Lamellas - Import export

Quality AA/AB/BB/ABC Available Thickness 25-50mm Available Width 50-250mm Available Length Up to 1500 Mm Drying KD (Kiln Dried) with moisture 6 – 12% Quantity per month min-30m3; max – 400 m3

Customized air-water heat exchangers for industrial use Three types of air-water heat exchangers Three different designs o air-water heat exchangers The Anthermo GmbH delivers three different designs of air-water heat exchangers: Finned tube heat exchangers Lamella heat exchangers Straight tube heat exchangers These heat exchangers are designed in a way, that inside the tube water or another liquid circulates. The air flows around outside the tubes or the fins/lamellas. The connection between the fins and the tube is used to enlarge the space for heat transfer between the liquid and the gas fluid. The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-water heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

Probe card with lamella contact elements, especially suitable for RF applications with a high design variety.

The flow of oil and water is introduced to the tank and distributed in a homogeneous way across the whole cross-section. They are composed of a containment tank which can be manufacturedfrom treated and painted carbon steel or AISI 304 stainless steel; lamellar pack with parallel channels in rigid polystyrene, stabilized agains UV radiation. Special materials and executions are available on request. Typical applications: first fall rain water, petrochemical plants, mechanical workshops, refineries and depots of hydrocarbons, washing of vehicles, land reclaim, refuse handling centres. -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The flow of oil and water is introduced to the tank and distributed in a homogeneous way across the whole cross-section. They are composed of just the parallel channel lamellar pack in rigid polystyrene, stabilized against UV radiation, closed in an AISI 304 containment frame; they are normally employed for housing in concrete tanks specifically built for the purpose of holding lamellar packs. Features Available height: 0,85 m Available widths: from 0,60 m to 2,20 m Available lengths: from 1,00 m to 3,00 m -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The flow of water and sludge coming from the previous phases of treatment (whether biological or physical-chemical) is introduced into the intermediate zone of the tank, just below the lamellar pack. Lamellar pack single-piece clarifiers for the sludge settling. They are composed of: containment tank which can be manufactured from, at choice, treated and paintedcarbon steel or in AISI 304 stainless steel; lamellar pack with parallel channels in rigid polystyrene, stabilized against UV radiation; surface discharge trough (with weir) in AISI 304; intermediate distributor of the feed flow. Special materials and executions are available on request. FM – L SERIES (11,30 m2/m3 equivalent surface) Typical applications: secondary clarification of biological sludge, drinking water plants, upgrading of existing clarifiers, rain water treatment. -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The flow of water and sludge coming from the previous phases of treatment (whether biological or physical-chemical) is introduced into the intermediate zone of the tank, just below the lamellar pack. Lamellar packs with frame for sludge removal. They are composed of the parallel channel lamellar pack in rigid polystyrene, stabilized against UV radiation, closedin an AISI 304 containment frame; they are normally employed for the upgrading of existing clarifiers or for housing in concrete tanks specifically built for the purpose of holding lamellar packs. F – L SERIES (equivalent surface 11,30 m2/m3) F – I SERIES (equivalent surface 14,90 m2/m3) F – S SERIES (equivalent surface 20,00 m2/m3) -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

High performance and modern conception clarifier. Application of advanced technology of the fluids passing into a lamella system.

European Oak/Beech Solid Finger Joint/Edge Glued Furniture Panel Prepared for furniture construction, continuous lamellas and finger-jointed lamellas I. Length and width glued Oak solid panels (finger-jointed lamellas) Thicknesses from 19mm to 40mm, width to 700mm, lengths to 5000mm Quality AB AB/BC B/C II. Width glued Oak solid panels (continuous lamellas) Thicknesses 21,5mm, 33mm, 40mm Width from 100mm to 980mm Lengths from 300mm to 3000mm Get more information please find from http://www.ld-wooden.com Oak Edge Glued Panel (ld-wooden.com) http://ld-wooden.com/Products/Oak%20edge%20glued%20panel/ http://www.ld-wooden.com/Products/Oak%20edge%20glued%20panel/Oak%20edge%20glued%20panel/2017-06-09/304.html

SMELA WOOD produce prime oak lamella for production of 3- and 5- three layer parquet in Ukraine cherkasy region, smila district. The appearance is given by a natural growth of wood, no knots, no sapwood or other visible defects allowed. thickness: 3 - 5,2 mm length: 3 000 mm or more width: 94 mm - 300 mm

SMELA WOOD produce prime oak lamella for production of 3- and 5- three layer parquet in Ukraine cherkasy region, smila district. The appearance is given by a natural growth of wood, no knots, no sapwood or other visible defects allowed. thickness: 3 - 5,2 mm length: 3 000 mm and more width: 94 mm - 300 mm

Individual textile bellows with and without protective lamellas in almost any desired shape and extent offer a cost-effective and flexible machine or guideway protection. A typical standard application for these products is the cover of linear guides or flat guides. Various synchronous mechanisms and damping variants are available for highly dynamic applications.

JSC Azuolo linija is successfully operating wood manufacturing company situated in Klaipeda city, Lithuania. The raw material we use for our production is the high quality oak wood. Our products made of oak wood are highly rated and acknowledged not only in the Baltic States but also in such countries as France, Germany, UK, Norway, Sweden and etc. We use the most advanced wood processing equipment in our production process and that‘s why we get products which meet the high quality standards requirements. We value our clients and according to their needs and requirements we can produce solid glued wood panels continuous lamellas in different dimensions (class A/A, A/B), Rustic B/C doors and stairs elements, windows sills, parquet boards and different interior details. All the products will be manufactured according to the requirements of customers with the following limits: •length 1220 mm– 3000 mm •width 700 mm – 1220 mm •thickness 18 mm,20 mm, 40 mm