Results for
TRIO UKRAINE LLC
Ukraine
The heating element (carbon fiber laminated into a film) is located at the bottom (inside the lower surface) of the boot. The heating element is placed between two layers of felt. The heated boot helps you to keep your feet warm and dry. The product can be used for bare feet and in socks. Infrared radiation has a positive effect on human health.
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer Hot Mirrors for use in Heat-Sensitive Systems. We supply a range of hot mirrors for a variety of applications – all individually QA checked and metrology tested for quality to ensure parts meet customers’ specs. What’s more, our Hot Mirrors are supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers working with Heat-Sensitive Systems. Hot Mirrors are designed to transmit visible wavelengths and to reflect heat, causing infrared wavelengths. Hot mirrors have a sharp cut-off between Infrared (IR) and visible because they have a dielectric coating that can be controlled for different AOIs (most commonly 0°). For systems that require heat shielding while still needing visibility, hot mirrors can be used. These can attenuate IR radiation and allow visible light, which permits your temperature-sensitive equipment to be visible.
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer Heat Filters for use in Heat Sensitive Systems. We supply a range of heat Filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in Heat Sensitive Systems. Heat Filters are designed to transmit visible wavelengths to absorb or reflect heat causing infrared wavelengths preventing it from reaching your system. Care has to be taken in the design of systems using heat filters. Absorptive blockers will heat up with use and could result in damage to the filter. Reflective blockers will redirect the heat to another location in your system. For more information read PDF ….
Request for a quoteKNIGHT OPTICAL (UK) LTD
United Kingdom
Knight Optical can offer KG1 Filters for use in Heat Sensitive Systems. We supply a range of KG1 Filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in Heat Sensitive Systems. KG1 Filters are designed to transmit visible wavelengths to absorb heat causing infrared wavelengths preventing it from reaching your system. Care has to be taken in the design of systems using KG1 as the material is an absorptive blocker and will heat up with use. To help alleviate the heating issue, our KG1 filters are thermally toughened For more information read PDF …..
Request for a quoteEMBRO GMBH
Germany
Embro is a German manufacturer of textile-based heating elements and pads. The elements are highly flexible, lightweight, and they are ideal for all kinds of mobile heating solutions such as: > car seat heaters > steering wheel heaters > heating elements for garments (jackets, gloves, ...) Furthermore, our elements are often used in infrared heating panels, too. Do not hesitate to contact us for further information.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HA-series are IP22 rated for indoor use and provide the most economic means of heating intermittently used buildings. The case includes M6 holes for optional suspension.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HWP2-series is dust- and water-jet tight complying with IP55 rating. HWP2 heaters are a stylish means of providing comfort heat in outdoor or indoor locations
Request for a quoteTROTEC GMBH
Germany
INFRARED HEATING PANEL TIH 500 SFlexibly usable flat heating panel for wall drying, effective spot heating or as a decorative heating element We strongly recommend using the infrared heating panel TIH 500 S when conventional air heaters have reached their limits for process-related reasons, when rooms without a heating are to be equipped with an effective heat source without costly modifications, or when you want to provide additional cosy warmth in your own four walls in a targeted and cost-effective manner. For while classical heating devices work with convection heat, which means that they use the ambient air as heat transfer medium, heat it up and distribute it in the room, the heating panel TIH 500 S generates direct heat by means of infrared radiation without convective loss and thus works on the same principle as the sun. This functional principle provides manifold possibilities of use for the infrared heating panel TIH 500 S:
Request for a quoteTROTEC GMBH
Germany
The infrared heating panel TIH 1100 S is part of our elite task force, for it always leaves a good impression under the most diverse of operating conditions. Regardless of whether it is intended to be used for additional selective heating in the living area, as sole heat source in rooms so far without a heating system such as the hobby room in the basement, or for commercial use, e.g. in the catering trade, at cool workplaces in the storage room or even in the area of construction drying and renovation. On the one hand, this is down to the completely uncomplicated application of the heating panel, which requires nothing more than a power outlet for its heating operation. On the other hand, it is due to the comforting warmth generated by the infrared heating.
Request for a quoteTROTEC GMBH
Germany
INFRARED HEATING PANEL TIH 700 SFlexibly usable flat heating panel for wall drying, effective spot heating or as a decorative heating element We strongly recommend using the infrared heating panel TIH 700 S when conventional air heaters have reached their limits for process-related reasons, when rooms without a heating are to be equipped with an effective heat source without costly modifications, or when you want to provide additional cosy warmth in your own four walls in a targeted and cost-effective manner. For while classical heating devices work with convection heat, which means that they use the ambient air as heat transfer medium, heat it up and distribute it in the room, the heating panel TIH 700 S generates direct heat by means of infrared radiation without convective loss and thus works on the same principle as the sun. This functional principle provides manifold possibilities of use for the infrared heating panel TIH 700 S:
Request for a quoteTROTEC GMBH
Germany
The infrared heating panel TIH 900 S supplied in TÜV-tested quality comes with all the references to be expected of a branded heating panel. This includes i.a. the efficient heating procedure with environmentally sound IR-C radiation, where 100 % of the electrical energy input is converted into heat output. Moreover, the TIH 900 S generates a cosy and clean warmth – without noises, smells, condensate or the unpleasant circulation of dust. For like the sun the heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room.
Request for a quoteEMBRO GMBH
Germany
In order to meet the demands for robustness and efficient heat output, we have embroidered the heating element on a glass mesh fabric carrier material. Between the meandering arrangement of the heating strands, we integrate a recess for the temperature switch in the CAD layout. In addition, a second wire is laid concurrently as a PTC thermistor for the electrical connection of the safety switch. After the technical embroidery process, the safety switch is inserted and connected by our company’s respective department. Each prefabricated element is tested for functionality and performance in the final inspection and is delivered to the customer after passing the test. As a semi-finished product, the infrared heating element on glass mesh fabric can be further processed by the customer, e.g. in connection with silicone, rubber or epoxy resin.
Request for a quoteTROTEC GMBH
Germany
Unfailingly the flexible and effective infrared heating panel TIH 400 S impresses with cosy warmth in every conceivable application scenario. Whether it is intended to be used for additional selective heating in the living area, as sole heat source in rooms so far without a heating system such as the hobby room in the basement, or for commercial use, e.g. in the catering trade, at cool workplaces in the storage room or even in the area of construction drying and renovation. For its heating operation the versatile flat heating panel requires nothing more than a power outlet, it is perfectly easy to handle and supplies clean heat – without noises, smells, condensate or the unpleasant circulation of dust. For like the sun the TIH 400 S heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room
Request for a quoteTROTEC GMBH
Germany
Efficient heating procedure with environmentally friendly IR-C radiationBranded heating panel of the size 605 x 505 mm with a power of 300 W The elegant infrared flat heating panel TIH 300 S generates a cosy and clean warmth – without noises, smells, condensate or the unpleasant circulation of dust. Like the sun the branded heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room.
Request for a quoteQUARZGLAS KOMPONENTEN UND SERVICE QCS GMBH
Germany
A quartz material / glass-encased, spiral-shaped, electrical heating coil with a large surface, which is mounted in a quartz material reflector shell with a handle, allows liquids to be heated indirectly by infrared radiation. This is used for the fast, economical evaporation or concentration of liquids. Due to this principle, only the surface of the liquid is heated very strongly, as the thermal radiation is absorbed even after shallow penetration, thus enabling gentle, uniform evaporation.In contrast to boiling evaporation, there is no loss of substance due to splashes from a moving boiling surface. Since surface evaporators are made exclusively from the material fused quartz / glass, it is possible to use the advantages of the material, such as good IR permeability, heat and heat change resistance, lowest electrical conductivity, exceptionally high chemical purity and resistance as a material. It complies with EC Directive 89/336 / EEC and EC Directive 73/23 / EEC.
Request for a quoteQUARZGLAS KOMPONENTEN UND SERVICE QCS GMBH
Germany
Immersion heater for laboratory and electroplating technology Advantages: Maximum energy utilization through infrared radiation - the cladding tube is infrared permeable; through heat conduction - the cladding tube made of quartz glass enables particularly good heat transfer. Temperature resistance Since quartz glass has practically no thermal expansion, such immersion heaters are particularly resistant to heat changes. Acid resistance Quartz glass immersion heaters are almost resistant to acids except phosphoric acid above 300 ° C and hydrofluoric acid. They are therefore particularly suitable for the direct heating of chemicals in the laboratory and electroplating technology. electric security The cladding tube made of quartz glass is an excellent electrical insulator - safe contact protection; optimal electrical safety through earthing of the interior. In compliance with EC Directive 89/336 / EEC and EC Directive 73/23 / EEC.
Request for a quoteOPSYTEC DR. GRÖBEL GMBH
Germany
High UV irradiance combined with a uniform irradiated area is the key feature of the surface LED series SFL-UV. The SFL-UV modules are water-cooled high-power UV LED sources with an intelligent LED driver. The absence of ineffective infrared radiation reduces the heat compared to conventional UV lamps. Three standard sizes are available with light-emitting areas of 100 x 100 mm to 200 x 200 mm. Customized sizes are available on request. Independent of size, we offer two versions. The HO versions reach high irradiance of up to 5500 mW/cm², while the ECO versions still offer up to 2000 mW/cm². Both irradiances are measured at a distance of 10 mm to the emitting window. The high irradiance allows extremely short processing times. Wavelengths of 365, 385, 395, 405, and 450 nm are available for many different applications.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
METMANN
Spain
The electric heating with infrared radiant panels of wave laga are a clean solution, without noise, without emission of light, economic and very comfortable to use n its design and manufacture, the utmost attention has been paid to obtain an aesthetic and effective equipment. The heat radiated from the panel surface is absorbed by people, walls, floors and furniture. Infrared heating does not cause air movement, which will make the air clean and no noise is emitted. Its high heat generation and excellent distribution allow the equipment to be used with less energy than other traditional heating methods. Radiant heat is very good for people′s health, it can change the body′s microcirculation, the cellular organization under the skin produces resonance, cleanses the microcirculation barrier, adjusts and balances the nervous system, promotes metabolism and increases physical power of the body.
Request for a quoteEUROLINIA
Belarus
Plinth Infrared Heaters feature stylish design, they are slim, but you’ll be surprised by the amount of warmth they can generate! Designed to be mounted at the bottom of the wall, just above the floor, which makes them barely visible. Made of powder-coated sheet metal, it has a very lightweight (2kg) and very slim design (15 mm thick). If you need more heat in the room, multiple plinth heating panels can be connected in a parallel chain (up to 15 heaters in one chain). For this purpose, a terminal block is provided on the rear side of the heater. Key Advantages include: don’t burn oxygen, have zero maintenance fee, save up to 40% energy compared to other models, quickly warms up surrounding objects, silent during operation, don't blow dust, pollen, or other allergens. Effective heating area is 3-5 m².
Request for a quoteEUROLINIA
Belarus
QSun-W 660W is easy to install on a wall or any other vertical surface using only 4 screws. Effective heating area - 10-18 m² depending on the heat insulation of the room. Customize your QSun-W panel with a graphic design of your choice. Wall mounted infrared heating panels QSun-W are proven to have one of the highest efficiency rates reducing heating costs. Clean Dust Free Heat - unlike forced-air systems, infrared heating panels don't blow dust, pollen, hair, or other allergens. We recommend installing the QSun-W on the walls in places where there are no obstacles to the spread of infrared heating rays (tables, chairs, etc.) at a height of at least 100 mm from the floor. It is recommended to install this heater under the window. In this case, it will also perform the function of a "heat curtain" and prevent the penetration of cold air through the window into the room.
Request for a quoteEUROLINIA
Belarus
QSun-WA 610W is equipped with a control unit that allows you to set the desired temperature. It is easy to install on a wall or any other vertical surface using only 4 screws. Effective heating area - 10-18 m² depending on the heat insulation of the room. Customize your QSun-W panel with a graphic design of your choice. Wall mounted infrared heating panels Qsun-WA are proven to have one of the highest efficiency rates reducing heating costs. Clean Dust Free Heat - unlike forced-air systems, infrared heating panels don't blow dust, pollen, hair, or other allergens. We recommend installing the QSun-WA on the walls in places where there are no obstacles to the spread of infrared heating rays (tables, chairs, etc.) at a height of at least 100 mm from the floor. It is recommended to install this heater under the window. In this case, it will also perform the function of a "heat curtain" and prevent the penetration of cold air through the window into the room.
Request for a quoteVICTORY LIGHTING (UK) LTD.
United Kingdom
Victory infrared quartz medium wave modules provide a fast, efficient heat source for a variety of industrial processes, primarily those that entail thermoforming of plastics. The range comprises five modules to suit different fitments, and spans wattages from 150–1250W. There is thus a module to suit a wide range of industrial applications, but if you have specific requirements, Victory’s technical team will be happy to discuss your specification and quote for it.
Request for a quoteEUROLINIA
Belarus
Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).
Request for a quoteEUROLINIA
Belarus
ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)
Request for a quoteEUROLINIA
Belarus
ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)
Request for a quoteEUROLINIA
Belarus
ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)
Request for a quoteEUROLINIA
Belarus
ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)
Request for a quoteEUROLINIA
Belarus
Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).
Request for a quoteEUROLINIA
Belarus
Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).
Request for a quoteResults for
Infrared heating - Import exportNumber of results
94 ProductsCountries
Company type
Category