High-temperature adhesive - Import export

Merbenit PC200 is a shortterm high temperature resistant, fastcuring, elastic sealant and adhesive with especially high and fast strength buildup, even at low temperatures. The high temperature resistance up to 240 °C, allows for the elastic bonding of components which are exposed to shortterm high temperatures in the production procedure or at the end application. Furthermore, Merbenit PC200 is compatible with paints, is adjustable, has great sealing properties and is noncorrosive on surfaces.

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation Also available as spray version OKS 3541 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Stir/shake well before use. Apply OKS 354 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3541 on evenly. Allow excess to drip off and wait for lubricant to penetrate

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation

High temperature adhesive tape with onesided aluminum foil suitable for a maximum radiant heat of 1000 ° C

Dry lubrication with solid lubricants as longer-acting reserve layers in area of low sliding speeds subject to high surface pressures and pre-determined sliding paths Wear protection for increased service life of sliding surfaces Fully effective even after longer standstills Resistant to high temperatures, no adhesion of dust and dirt Advantages and benefits Highly effective due to good adhesion to prepared substrates Consistent coefficient of sliding friction under maximum loading of sliding film Wear protection of sliding points that can otherwise not be lubricated is possible Firmly adhering, pressure and temperature-resistant dry lubricating film

secutex secuGrip90laminate secuGrip90 laminate is our new, selfadhesive antistick laminate that you can apply yourself. The secuGrip90 coating, which is up to 2 mm thick, features a high coefficient of friction and is extremely abrasion resistant. Application is easy The reverse side is coated with an acrylate adhesive designed to stick to a variety of smooth surfaces including Metals, glass, ceramic, stone, paper & cardboard, fabric, various plastics and soft plastics. Features of the acrylate adhesive high adhesive strength temperature and weather resistant tolerates moisture well equalises tension

Our High Temperature Tapes are perfect for all kinds of masking uses during processes which regularly use a lot of heat, examples of these processes includes Powder Coating where powder is sprayed on as a coating before being baked on to an application for a permanent finish. Coming in a huge number of variations including Ultra high temperature & Low tack adhesives, you can rest assured that we have the best choice for you. As mainly film based products, these High Temperature Tapes are malleable and flexible meaning that they can be used for tricky areas where there are many sharp corners.Discs are also available which can be used to seal off and prevent small holes such as screw holes from becoming filled during the coating process. For our full selection of Powder Coating Tapes / High Temperature Tapes please visit our website using the link below. Free sample lengths are available on all our tapes meaning you can try before you buy.

Assembly and repair bonding of almost all materials - Solvent-free - Waterproof, age-, weather- and temperature-resistant - Very high initial adhesion - Fast curing - Easy processing - Can be sanded and painted over - Use of common application guns - For indoor and outdoor use

Rubber extrusions, including custom made precision extruded rubber and much more. Whatever your requirements, industrial rubber specialist J-Flex is the comprehensive source for all your rubber extrusions and rubber fabrications, whether you need small, medium or large volumes. Usually produced in either solid or sponge premium grade silicone, we offer a choice of over 2,000 existing sections for sealing, silencing, insulating, channelling and protection. Whether you are looking for tubing, sleeving, strips, cord or complex profiles, we can supply the extrusion you need, whatever the specification. If you need something specific we can produce bespoke rubber extrusions especially for you. Need special extruded rubber requirements? • High temperature adhesive backing can be added if required. (Please specify when you place your order). • We offer a cut to size service and can meet requests for particular lengths including longer ones. • Lathe cut washers.

Introducing the MVHHT Series: High-temperature filters built to withstand the heat. Crafted with micro glass fiber media and separator, available in stainless steel or galvanized steel frames. Resilient up to 250 degrees, these filters are essential for air conditioning systems and industrial processes. "

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and solid parts or structural elements that can be used at temperatures up to 1.400 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% biosoluble — high temperature resistance — low thermal conductivity — high chemical resistance * — low weight — good tear resistance — high flexibility — easy processing — complicated geometries can be produced — recyclable * to achieve higher acid resistance, a special coating is required. Available from manufacturer. Application: Burner plant components, crucibles, thermocouple housings, coupling devices in continuous casting plants, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals, gasket in aluminium foundries, gaskets in blast furnaces, expansion joints, pipe insulation, catalyst insulation, repair work in the high temperature range.

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and strong parts or structural elements that can be used at temperatures up to 1 .600 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% natural — biosoluble — high thermal shock resistance — low thermal conductivity — high chemical resistance * — recyclable — low weight — good tear resistance — high flexibility — easy processing — harmless to health — complicated geometries can be produced * A special coating is required to achieve high acid resistance. Available from manufacturer. Fields of application: gaskets, crucibles, thermocouple housings, coupling devices in continuous casting plants, expansion joints, convex and flat gaskets in blast furnaces, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals.