High-temperature adhesive - Import export

Merbenit PC200 is a shortterm high temperature resistant, fastcuring, elastic sealant and adhesive with especially high and fast strength buildup, even at low temperatures. The high temperature resistance up to 240 °C, allows for the elastic bonding of components which are exposed to shortterm high temperatures in the production procedure or at the end application. Furthermore, Merbenit PC200 is compatible with paints, is adjustable, has great sealing properties and is noncorrosive on surfaces.

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation Also available as spray version OKS 3541 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Stir/shake well before use. Apply OKS 354 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3541 on evenly. Allow excess to drip off and wait for lubricant to penetrate

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation

High temperature adhesive tape with onesided aluminum foil suitable for a maximum radiant heat of 1000 ° C

Dry lubrication with solid lubricants as longer-acting reserve layers in area of low sliding speeds subject to high surface pressures and pre-determined sliding paths Wear protection for increased service life of sliding surfaces Fully effective even after longer standstills Resistant to high temperatures, no adhesion of dust and dirt Advantages and benefits Highly effective due to good adhesion to prepared substrates Consistent coefficient of sliding friction under maximum loading of sliding film Wear protection of sliding points that can otherwise not be lubricated is possible Firmly adhering, pressure and temperature-resistant dry lubricating film

Universal high-temperature grease with strong adhesive properties and high mechanical and thermal stability. Attention The short-term permissible temperature peak is a maximum of +200°C; for continuous temperatures above 160°C, relubrication must be carried out at shortened intervals depending on the thermal load

Short description: Hochtemperaturbeständig High-temperature-resistant and strong silicone adhesive and sealant. Especially suited for heat-loaded, elastic adhesive bonding and sealing. Very good adhesion on steel, aluminium, glass, ceramic and many other materials. Applications: Industrial furnaces, Flue gas boxes, Heating facilities, Exhaust pipes and Heating cabinets and furnaces. The outstanding product properties (e.g. permanent elasticity) are maintained in the entire temperature range from -60°C to +300°C. Properties: High temperature resistance up to +300°C, Very good UV stability, Excellent resistance to weathering and aging, Good chemical resistance, Elongation to break approx. 500% and Colour: red.

secutex secuGrip90laminate secuGrip90 laminate is our new, selfadhesive antistick laminate that you can apply yourself. The secuGrip90 coating, which is up to 2 mm thick, features a high coefficient of friction and is extremely abrasion resistant. Application is easy The reverse side is coated with an acrylate adhesive designed to stick to a variety of smooth surfaces including Metals, glass, ceramic, stone, paper & cardboard, fabric, various plastics and soft plastics. Features of the acrylate adhesive high adhesive strength temperature and weather resistant tolerates moisture well equalises tension

Our High Temperature Tapes are perfect for all kinds of masking uses during processes which regularly use a lot of heat, examples of these processes includes Powder Coating where powder is sprayed on as a coating before being baked on to an application for a permanent finish. Coming in a huge number of variations including Ultra high temperature & Low tack adhesives, you can rest assured that we have the best choice for you. As mainly film based products, these High Temperature Tapes are malleable and flexible meaning that they can be used for tricky areas where there are many sharp corners.Discs are also available which can be used to seal off and prevent small holes such as screw holes from becoming filled during the coating process. For our full selection of Powder Coating Tapes / High Temperature Tapes please visit our website using the link below. Free sample lengths are available on all our tapes meaning you can try before you buy.

High performance heat reflective aluminium backed glass cloth, single coated with a high temperature pressure sensitive silicone adhesive. Thickness:0.2mm; silver Very good temperature resistance.SAE J2302 Thermal Effectiveness at 550°C is 107°C (other testing results available on request).High tensile strength.Halogen-free.Lead-free.Conforms to European Directives 2000/53/EC for End of Vehicle Life (ELV) recycling (does not contain heavy metals) and 2002/95/EC (RoHS).Excellent chemical compatibility with most materials used in components for wiring.

Glass cloth tape coated with a thermosetting silicone adhesive with 0.17 mm total thickness and recommended for coil winding protection and insulation and fixing wires prior impregnation (180°C thermal class H). UL listed - Thought abrasive resistance. - Excellence mechanical and electrical properties. - High conformable, no corrosion, - UL approval. - Flame retardant. - High tensile strength. - Meet MIL-I-19166C Type 7 MIL. APPLICATIONS Fixing and reinforcing coils and output wires,Fixing and securing wires onto carcass prior to impregnation.Fixing, reinforcing and securing high temperature non-adhesive insulating materials.Insulating switches, inductors, connections, class H dry-type transformers leads.Protective mask of PCB for wave soldering.Securing, splicing cables and wires harnesses.

most outstanding properties are its high dielectric and tensile strength, which make it an extremely durable insulation tape. The high-temperature properties of the PTFE and silicone adhesive allow it to perform in continuous temperatures up to 260°C (500°F). As high-modulus tape, also exhibits low elongation which enables it to be applied with automatic wrapping equipment. The other outstanding features of include chemical inertness as well as low-friction, anti-stick and non-toxic properties, making it the right material for numerous applications Thickness 0.089 mm 0.114 mm 0.165 mm 0.191 mm

It is a 50 micron Teonex® film coated on one side with high-temperature silicone adhesive. Designed for high temperature electrical applications where a thin, strong backing combined with excellent dielectrical properties is required. Features • High temperature resistance • Good adhesion on difficult substrates • Good chemical and solvent resistance Applications • Insulation of bobbins, pencil coils, transformers, motors, capacitors, etc. • Cable and copper wire manufacturers

A complete range of specialty adhesive tapes to perform in a variety of thermal spray coating processes, from grit blast to high velocity oxygen fuel (HVOF). Available with highly conformable backings made to maximize abrasion resistance and leave behind clean edges during removal, and the high-temperature adhesive used on these products ensures good holding power during use and clean adhesive removal, minimizing post spray rework. Many thermal spray masking tapes are approved for use in aerospace on various Pratt & Whitney, Rolls Royce and GE turbines.

It is an adhesive heat shield made from a metalized polyamide polymer laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It’s minimal clearance and ease of use makes Gold glass tape a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. Applications Car, motorbike and boat exhaust pipes, heat protection, cable covering, pipe insulation.

Assembly and repair bonding of almost all materials - Solvent-free - Waterproof, age-, weather- and temperature-resistant - Very high initial adhesion - Fast curing - Easy processing - Can be sanded and painted over - Use of common application guns - For indoor and outdoor use

Introducing the MVHHT Series: High-temperature filters built to withstand the heat. Crafted with micro glass fiber media and separator, available in stainless steel or galvanized steel frames. Resilient up to 250 degrees, these filters are essential for air conditioning systems and industrial processes. "

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and solid parts or structural elements that can be used at temperatures up to 1.400 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% biosoluble — high temperature resistance — low thermal conductivity — high chemical resistance * — low weight — good tear resistance — high flexibility — easy processing — complicated geometries can be produced — recyclable * to achieve higher acid resistance, a special coating is required. Available from manufacturer. Application: Burner plant components, crucibles, thermocouple housings, coupling devices in continuous casting plants, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals, gasket in aluminium foundries, gaskets in blast furnaces, expansion joints, pipe insulation, catalyst insulation, repair work in the high temperature range.

High-temperature vacuum-formed products made from biosoluble ceramic fibres are lightweight and strong parts or structural elements that can be used at temperatures up to 1 .600 °C in air and in aggressive environments, including direct contact with liquid metals. — 100% natural — biosoluble — high thermal shock resistance — low thermal conductivity — high chemical resistance * — recyclable — low weight — good tear resistance — high flexibility — easy processing — harmless to health — complicated geometries can be produced * A special coating is required to achieve high acid resistance. Available from manufacturer. Fields of application: gaskets, crucibles, thermocouple housings, coupling devices in continuous casting plants, expansion joints, convex and flat gaskets in blast furnaces, channel elements of metal troughs, inlet device in the melting of non-ferrous and ferrous metals.