Hexagon screws - Import export

The surface of the hexagon head bolt is polished and, with regard to design optimised for the use in hygienic environments. The bolt head is convex on the top face and the collar has a conical formed top surface. Instead of troublesome embossing or indentations, the bolt head is smooth with a surface finish of Ra 0.8 µm. Dirt and residue from products or cleaners seldom adheres and easy cleaning is ensured.

Cylindrical head screw with hexagon socket

Dowel for insulation materials with plastic/ metal nail The main purpose is to attach thermal insulation materials to concrete masonry. It is used for mounting on walls that are particularly exposed to the adverse effects of atmospheric conditions. Material: dowel - HDPE (low pressure polyethylene); nail - impact resistant polypropylene/galvanized metal Starting from a length of 140mm, it is recommended to use a metal nail. Per 1 sq . m . 4-5 dowels are recommended for mounting insulation. The dowel for insulating materials has a unique distinctive feature - on The inscription OMAH is stamped on the surface of the hat.

Screw for fixing wooden logs and slats (DIN 571)

These spring plungers are chiefly used as ejectors and spring stops in machine construction. The thrust pin is actuated in the axial direction. Drawing reference: 1) grub screw glued in

Sleeve steel grade 5.8. Thrust pin POM. Spring grade D steel wire.

Also called fixture clamps. The minimal height of this fixture clamp allows numerous clamping problems in fixture and equipment construction to be solved. The brass hex washer offers a gentle yet extremely stable and safe clamping of workpieces. By using several fixture clamps entire pallets can be set-up. “A” = distance from workpiece to screw centre (cam screw). On request: Replacement cam screws.

Steel class 45 H, black. Stainless steel A 2-70, bright. Drawing reference: L2 = approx. 2x thread pitch

Work thread – Hose clamp DIN 3017, Form A with hexagon head screws SW 7 S

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4017-8.8. Dimensions and tolerances depend on the current status of the standard. Hexagon screws are suitable for being tightened with an open-end spanner. This is a special advantage in comparison to our round flat pot magnets, which only can be screwed on by hand. The hexagon screws are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s. Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1

Typically ceramic bolt and screws are used in low-stress & high temperature conditions. These conditions are most commonly found in electronic equipment, where ceramic screws are particularly attractive due to their lack of electrical conductivity. Another benefit of ceramic screws over polymer based ones are that they have much higher and longer lasting performance due to their ability to withstand sustained heat cycling. Supply in M2x5, M3x10 and M4x10 screws with nuts, customized size is acceptable.We recommend to use the screws only together with the supplied nuts. The usage with metallic threads might not fit as the ceramic parts are manufactured in moulds and reach their final dimension after sintering. Hence they have other tolerances than metallic threads. >Thread Specification:M3-M24 >Screw cap:Hexagonal socket, flat head >Plain Ceramic Hex M3 x 10mm Set Screw >Made from alumina ceramic >Suitable replacement for plastic screws to solve embrittlement or creepage problems

• In practical tool holder for easy removal and storage of the key • For hexagon socket screws • Surface faced and Edges chamfered • Nickel-plated • Made of chrome vanadium steel

M8; length 39mm

Countersunk flat head screw with hexagon socket

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range depends on the material of the o-ring VMQ: -55 °C / + 120 °C EPDM: -40 °C / + 120 °C NBR: -40 °C / + 100 °C — Protection grade IP66 / IP68 - 10 bar (6h) / IP69K

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range -40 °C / + 100 °C — Protection grade IP66 / IP68 - 5 bar — Test Standard UL 514B

Protection against dirt and corrosion. Material: PE Colours: without last digits = black last digit W = white last digits GR = grey Further types on written request.

Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285 and 302

For a quick and clean covering of hexagon socket screws. Protection against dust and dirt. Ideal for toolbuilding and mechanical engineering. Material: PE Colours: last digits 113 = white last digits 220 = black last digits 002 = grey

Hexagon head screws ~DIN 933 (~DIN 34810) Material: PVDF Colour: natural

Hexagon head screws ~DIN 933 (~DIN 34810) Material: PP Colour: natural

Hexagon head screws - metal ~DIN 933 (~DIN EN ISO 4017, threaded to head) Material: stainless steel A2

The base is dull chromed, hardened and lapped. The metal collet attachment guarantees reliable fixing of the dial gauge. An additional internal hexagon screw makes exchanging the dial gauge easier. Each of our mechanical dial depth gauges is equipped with the 10 mm long special contact point 573/21.

Protection caps for facade screws (hexagon head screws) with round neoprene slice. Material: PE Colour: black Ø = washer diameter A production according to RAL colour chart or colour sample is possible - please send us your enquiry!

Hexagon head screws - metal ~DIN 933 (~DIN EN ISO 4017, threaded to head) Material: machining steel 4.8 zinc-plated

Hexagon head screws ~DIN 933/931 (~DIN 34810) Minimum order quantity: 500 pcs. at M3 200 pcs. at M4, M5 + M6 100 pcs. from M8 Material: PA 6.6 Colour: natural