Hexagon screws - Import export

The surface of the hexagon head bolt is polished and, with regard to design optimised for the use in hygienic environments. The bolt head is convex on the top face and the collar has a conical formed top surface. Instead of troublesome embossing or indentations, the bolt head is smooth with a surface finish of Ra 0.8 µm. Dirt and residue from products or cleaners seldom adheres and easy cleaning is ensured.

Cylindrical head screw with hexagon socket

Dowel for insulation materials with plastic/ metal nail The main purpose is to attach thermal insulation materials to concrete masonry. It is used for mounting on walls that are particularly exposed to the adverse effects of atmospheric conditions. Material: dowel - HDPE (low pressure polyethylene); nail - impact resistant polypropylene/galvanized metal Starting from a length of 140mm, it is recommended to use a metal nail. Per 1 sq . m . 4-5 dowels are recommended for mounting insulation. The dowel for insulating materials has a unique distinctive feature - on The inscription OMAH is stamped on the surface of the hat.

Screw for fixing wooden logs and slats (DIN 571)

Hex Key For Steel Tamperproof Screws

Hexagon Cap Screws -UNC- A2 stainless steel - UNC

Machine Screw Hex Head Full Thread Brass DIN 933

This item refers to DIN 912 but P6.6 material is not guaranteed by norms

Variant in A2 stainless steel

Variant in A4 stainless steel for use in a highly exposed environment

Hexagon Head Machine Screw With Flange A2 stainless steel - DIN 6921

Hexagon Head Screws Full Thread Inox A4-80 - DIN 933 Variant in A2 & A4 stainless steel

Hexagon Head Screws Full Thread A4-80 stainless steel - ISO 4017 Variant in A2 & A4 stainless steel

These spring plungers are chiefly used as ejectors and spring stops in machine construction. The thrust pin is actuated in the axial direction. Drawing reference: 1) grub screw glued in

Sleeve steel grade 5.8. Thrust pin POM. Spring grade D steel wire.

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and duplicate acceptances (eg works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

Also called fixture clamps. The minimal height of this fixture clamp allows numerous clamping problems in fixture and equipment construction to be solved. The brass hex washer offers a gentle yet extremely stable and safe clamping of workpieces. By using several fixture clamps entire pallets can be set-up. “A” = distance from workpiece to screw centre (cam screw). On request: Replacement cam screws.

Work thread – Hose clamp DIN 3017, Form A with hexagon head screws SW 7 S

The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4017-8.8. Dimensions and tolerances depend on the current status of the standard. Hexagon screws are suitable for being tightened with an open-end spanner. This is a special advantage in comparison to our round flat pot magnets, which only can be screwed on by hand. The hexagon screws are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts.

INFICON ISO-KF fittings are manufactured according to ISO 2861/1, DIN 28403 and Pneurop 6606. Our quality fittings are the standard components for all vacuum and high vacuum applications. The high quality INFICON components are designed and tested for leak rates less than 1 x 10 -9 mbar l/s. Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Hexagon head screw; DIN933, A2, M5x20; silver plated Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1 Washer DIN 125 A , A2 5.3/10x1

RIFBOLT blind rivet studs consist of a sleeve and a screw, which are joined together by welding or crimping. As special production components we can use different lenghts and types of screws can be used as well as almost every rivet nut sleeve. Blind rivet studs offer a multiple use. They can — connect different working pieces, — install a thread into components and — fix additional parts to the screw.

Typically ceramic bolt and screws are used in low-stress & high temperature conditions. These conditions are most commonly found in electronic equipment, where ceramic screws are particularly attractive due to their lack of electrical conductivity. Another benefit of ceramic screws over polymer based ones are that they have much higher and longer lasting performance due to their ability to withstand sustained heat cycling. Supply in M2x5, M3x10 and M4x10 screws with nuts, customized size is acceptable.We recommend to use the screws only together with the supplied nuts. The usage with metallic threads might not fit as the ceramic parts are manufactured in moulds and reach their final dimension after sintering. Hence they have other tolerances than metallic threads. >Thread Specification:M3-M24 >Screw cap:Hexagonal socket, flat head >Plain Ceramic Hex M3 x 10mm Set Screw >Made from alumina ceramic >Suitable replacement for plastic screws to solve embrittlement or creepage problems

• In practical tool holder for easy removal and storage of the key • For hexagon socket screws • Surface faced and Edges chamfered • Nickel-plated • Made of chrome vanadium steel

M8; length 39mm

Hexagon head screws with thread to head acc. to DIN 933-8.8 (ISO 4017) galvanized surface

Countersunk flat head screw with hexagon socket

Clamping clips similar to DIN 15313 with hexagon socket suitable for hexagon head screws acc. to DIN 933 galvanized surface Please find results of calculation of stability in our download area:

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range depends on the material of the o-ring VMQ: -55 °C / + 120 °C EPDM: -40 °C / + 120 °C NBR: -40 °C / + 100 °C — Protection grade IP66 / IP68 - 10 bar (6h) / IP69K

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range -40 °C / + 100 °C — Protection grade IP66 / IP68 - 5 bar — Test Standard UL 514B