Heat presses - Import export

Electric heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens and closes automatically ✔ 30 x 40cm base plate ✔ No compressor ✔ Pull out base plate This neat looking heat press is great for small businesses and DIY. The fully electric heat press is designed for small quantities. Due to its electric closing mechanism, it is easy to operate without exhausting your arm. Using a small display, you can adjust temperature and dwell time to your likings and save pre-sets for reoccurring applications. In automatic mode, a small sensor closes the press once the base plate is pushed in all the way. This press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more. Works perfectly with all kinds of transfers from DTF to screen printed or vinyl.

Manual clam shell type heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens automatically ✔ Up to 50 x 60cm base plate ✔ Magnetic closure ✔ Pull out base plate This quality heat press is great for small businesses. With a long lever it is easy to close this clam shell type heat press. Once closed, a magnet holds the press shut and automatically opens once the set dwell time is reached. The pull-out base makes it even easy to place the textile and transfer. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and a rotary know allows to set the pressure. Last, a special coating on the heated element avoids stains. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Electric double heat press for textile transfers. ✔ Double platen ✔ Even temperature and pressure ✔ Opens and closes automatically ✔ Up to 40x50cm base plate ✔ No compressor ✔ Laser guides This fully electric double heat press is designed for medium size productions without compressed air. Due to its electric closing mechanism, it is easy to operate without exhausting your arm. And while one side is pressing, you have time to prepare the other for the next cycle. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and dwell time to your likings. In automatic mode, the machine will automatically close and open the press as well as move it from one platen to the other based on set timings. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Pneumatic heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens automatically ✔ Up to 50 x 60cm base plate ✔ Swing away 90° ✔ Pull out base plate This heavy-duty heat press is great for small to medium businesses. Due to its pneumatic closing mechanism, it is easy to operate without exhausting your arm. The pull-out base and the rotatable head make it even easier to place the textile and transfer. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and dwell time to your likings and a valve controls the air pressure. To safely operate the press, two buttons need to be pressed on each side of the machine to lower the heated element. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Discover the TURBOTRAN 6.1, the fully automatic heat transfer machine for textile printing with up to 600 pcs./hour. ✔ Efficiency and speed: The machine does it all, from transfer placement to pressing, peeling and giving out the finished textile ✔ Reliable support: Dedicated service team by phone, email or on-site. ✔ Features: Automatic start, a panic button, membrane platens, laser guides, and more This fully automatic heat transfer carousel is the most modern heat press in the market. With 1 operator you can decorate up to 600 t-shirts per hour. Even the application of several transfers at once is possible. The easy to change platens come in any size you need. The TURBOTRAN can be used to apply any kind of transfer but works best with hot peel DTF or screen-printed ones. An outfeed conveyor belt allows an easy integration into your process. Speed up your textile printing business for work wear, sportswear, t-shirts, hoodies, bags and more.

Automatic double thermotransfer machine (operating with air pressure) and suitable for sublimation stamps Electronically temperature adjustment of great accuracy, for stabile plate temperature 0-250oC Checking temperature of plate for 3 points with 3 electronic thermostats. Adjustable plate pressure Electronic time adjustment switch from 0-999 sec Usable surface: 140 x 90 cm x2 Power: 15 KW Voltage: 400V 50Hz

HotMicroCoils have an exceptional capacity for being shaped - even in three dimensions. Many special winding patterns and geometries apart from the purely cylindrical are thus possible, allowing heating close to the contours of all manner of surfaces. Applications include hot runner manifolds, heating plates and hot die stamps. The shaped heating elements thus obtained can be used in two principal ways: either placed over the surface to be heated (firmly bonded by soldering, force-fitted, pressed or otherwise appropriately joined) or pressed into a positive fit in grooves in the surface to be heated. The second of these alternatives is also becoming more widely accepted in plastics processing, as it offers the best heat transfer because the heating area is the greatest (see also Freek Heat Transfer System). Since not all our customers have the necessary equipment and experience to press the HotMicroCoil elements into the contours of the surfaces, Freek also offers this as a service.

Micanite is a kind of insulation paper which is impregnated with a heat resistant binder and afterwards pressed in several shifts under heat and high pressure to plates. This material is heat resistant up to 350 °C, as special construction (Phlogopit) up to 450 °C, and is used for the wire wound formers as well as for the encapsulating cover plates of mica surface heaters. Because of the typical "sandwich"-construction of Micanite Flat Heating Elements and their high watt density it is necessary to use a platen to press the mica heater onto the surface to be heated. Established on the market for round Flat Heating Elements are some standard dimensions (Ø 58 / Ø 65 / Ø 80 / Ø 100 / Ø 160 / Ø 260 mm). But normally Micanite Surface Heating Elements are constructed on customer's request. Mica heaters can be metal sheathed for higher mechanical stability. This makes the heater flexible, so that it is also possible to build a band heater.

Ensure sample purity for microfluidic diagnostic systems POREX ® microfluidic media and filters provide sample filtration and absorption, particulate capture, debubbling, venting, fluid metering, and separation for real-time, PCR and molecular diagnostics systems. Our highly specialized, pure materials and media are critical to the function of lab-on-a-chip, molecular diagnostics, and POC analysis solutions by: Minimizing interference with critical samples and assays – Certified Pure POREX® materials certified by independent test labs ensure optimal performance, accuracy and reproducibility. Making manufacturing easier – Our components can be easily inserted into your device using common manufacturing techniques including press fitting, heat staking and ultrasonic welding. Providing customized material solutions – Our proprietary material technology expertise can help find the right material solution for any microfluidic component need. Applications Sample...

A comprehensive porous material solution As a complete porous materials solution, POREX® bioprocessing media provide critical functionality and performance in single-use bioprocessing applications. Our bioprocessing media and filters: Are robust and easily incorporated using common techniques such as press-fitting, heat-staking and ultrasonic welding. Ensure performance, accuracy and reproducibility–Certified Pure POREX™ materials and filters are rigorously tested and qualified by independent analytical, clinical and life cycle microbiology laboratories to help insure the purity demanded in bioprocessing applications. Comply with regulatory standards–POREX ® bioprocessing media and filters are USP Class VI, Gamma sterilization and TSE/BSE compliant. Applications Include Spargers Prefilters Wicks Vents Tangential flow filters Floating filters Formats Available Sheets Tubes Complex three-dimensional structures Material Offering Advanced porous materials (PE, PP) Porous PTFE...

The Industrial TactArray is a flat sensor that can capture and map pressure distribution in even the most extreme conditions. Constructed from high-quality Kapton or Polyimide, the Industrial TactArray can pressure distribution of up to 700 psi and in temperatures between -40° C and 200° C. This system is best suited for use in applications requiring tactile sensors that can withstand extremely high temperatures and pressures—like heat presses, brake pads, and nip rollers. Key Features High-resolution sensor arrays can measure pressure distribution at levels of up to 700 psi and retain performance characteristics in temperatures between -40° C and 200° C Real-time thermal compensation ensures accurate measurements even under changing temperature conditions Ultra-thin construction, 0.3 mm thick, and high-resolution sensing elements Can accommodate moderate flexing and bending Available in multiple sizes and configurations Chameleon Visualization Software included

High-performance heat sinks from Seifert electronic are exclusively designed for forced cooling applications. The powerful heat sinks from the Vario and DKL series impress with their large cooling surfaces. Utilizing a finned construction, rib spacing can be manufactured that is not achievable with conventional extruded profiles. Thanks to maximized surface area with the same weight, a high-performance heat sink delivers above-average cooling performance per unit volume. We have patented our proprietary compression geometry at Seifert electronic. In this process, individual fins are precisely cold-pressed into a heat sink without the use of adhesives. Heat conduction in the finned heat sinks occurs directly from the base to the fins, without any thermal transition as seen with pressed-in ribs into a solid base. Custom mounting holes can be incorporated into the pressed, surface-milled base.

Dough balls which are prepared according to the diameter of the desired product are released one by one into the hopper of the machine. The dough is crushed between two homogeneously heated plates with the hot pressing techniques. When the plates are spacing the rolled dough slides out of the machine. When the plates are spaced, the new dough roll falls between the plates from the hopper. Temperature of each plate; It is controlled by measuring separately. Product thickness can be adjusted manually.

A high-tech, high performance fountain solutionis formulated as revolut ionary for today’s generation of high-speed and high pagination heat-set web presses with alt type of dampening system. it reduces alcohol consumption step by step towards 0%. PROPERTIES NOVA ALCOFREE HS reduces step by step and eliminates alcohol Constant printing quality without alcohol(non v.o.c.) Excellent ink/water balance gives to printers wide latitude Perfect over emulsificat io n resistance eli minatesink feedbacks on the rollers Quick start up reducesdown time and waste Buffer system keeps the Ph value optimum (4, 8-5,2) for high quality printing Anti pilling agents reduce blanket cleaning stops andincrease the production output Keeps clean the dosage system and circuit with effective washing agents and biocides Prevents corrosion on the metal parts of the machine and plates. It is not harmfull for plastic parts of the machine It has been formulated to meet the requirements of the latest ctptechnology

Extracted from high quality peeled sunflower seeds by cold pressing, without heating and without chemical processing. STORAGE In a cool place protected from direct sunlight COUNTRY OF ORIGIN Bulgaria.

Extracted from high quality peeled sunflower seeds by cold pressing, without heating and without chemical processing. STORAGE In a cool place protected from direct sunlight COUNTRY OF ORIGIN Bulgaria

Extracted from high quality peeled sunflower seeds by cold pressing, without heating and without chemical processing. Advantages: without chemical processing Suitable for: preparation of sauces, marinades and mayonnaise flavoring salads Cold-pressed sunflower oil is obtained by first dehusking the seeds and then pressing them into a press. With this method of extracting the oil, a large part of the oil remains in the seeds, but the taste, vitamins and minerals are preserved. to thermally processed foods when the latter cool down. This type is considered particularly useful because it is only subject to filtering. It completely preserves phosphatides, sterols, tocopherols and other useful components. It has a pleasant taste and odor.

It is extracted from high-quality peeled sunflower seeds, by cold pressing, without heating and without chemical treatment. Advantages: mild scent and pleasant taste without chemical processing Suitable for: flavoring salads making sauces It does not contain toxic residual agents (acids) from chemical processing, because they are not used in the extraction process. It is used only and only in the cold kitchen - salads, vegetable pockets or added to heat-treated foods when they cool down.

It is extracted from high-quality peeled sunflower seeds, by cold pressing, without heating and without chemical treatment. Advantages: mild scent and pleasant taste without chemical processing Suitable for: flavoring salads making sauces It does not contain toxic residual agents (acids) from chemicalprocessing, because they are not used in the extraction process. It is used only and only in the cold kitchen - salads, vegetable pockets or added to heat-treated foods when cooled down.

Cold-pressed oil is obtained by cold pressing at low heat in order to preserve the aroma, color and all useful substances. Our passion is organic rosehip seed oil (Rosa Canina). This is a type of wild rose grown on grassy slopes, along rivers, plains and mountains up to 2000 m above sea level – again throughout the country.

The High Density Heating Material Is Pressed To Make The Jacket More Warm, Comfortable And Fit To Your Body

eps press, foam press, EPS STYROFOAM DESIGN PRINTING MACHINE is used at facade in the production of decorative sawn timber, stone appearance, broken brick pattern, etc. We obtain these patterns by pressing the heated mold at high pressure on the product.

Hydraulic presses are suitable for the high-precision forming of various parts, whereby the maximum press capacity is available in every position of the slide. In combination with their flexibility in terms of slide speed and dwell time, they are also particularly suitable for press hardening applications. Overview: ● Press capacity: 1,500 - 25,000 kN ● Part size: small, medium, large ● Application: for the production of drawn parts or as part of a press hardening line Description and benefits: ● Slide movement either pressure and / or travel-dependent ● Specially designed hydraulic system without shift shock during operation ● Motorized oil circulation with cooling or heating unit The models for press hardening are available in 8,000, 12,000 or 16,000 kN and come with a newly developed combination of servomotor and hydraulics that allows higher speeds in the closing and return movement of the slide.

We can offer finishing lines for glass fabric with extremely light surface weights for the production of circuit boards including highttemperature treatment up to 450°C, finishing lines for woven glass fabric for the production of glass wall paper and for the construction of reinforcement and grinding disks. We also can supply modules such as unwinding units, heating presses, fabric accumulators, drying and heat treatment units, traction units, stretching units, selvedge gumming and cutting units and batchers used as individual units.

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® Press flange PN 10/16, with female end, for potable water and heating

System press fittings from copper for copper pipes according to EN 1057 for drinking water and heating installations. SANHA®-Press copper system fittings are well-known for outstanding quality, easy to work with and offer the right solution for a wide range of applications.

High-vacuum heat-treatment furnaces with integrated pressing unit and power-regulated resistance heater elements (Hot Press). Used for diffusion bonding and forming processes under high vacuum conditions as well universal use for thermal treatments and processes where particularly demanding requirements and sophisticated materials are involved.

Sandwich panel press Sandwich Panel Production Line Our contionuous PUR / PIR sandwich panel production line is already recognized its value by exporting to European country with CE and other major sandwich panel producing companies at domestic and foreign, DMMET, we will keep trying for development in accordance with customer’s needs for the high quality sandwich panels. APPLICATION of the PU-PIR PANEL PRODUCTION LINE This production line is suitable for manufacturing socket type ( wall plate panel ) and lapped type ( roof tile panel ) pu sandwich panels. FLOW CHART Uncoiler - Feeding Guide - Protective Film Coating - Roll Forming Machine - Rolling Conveyer - Steel Pre-Heating - Foaming Machine - Double Belt Pressing Machine - Rolling Conveyer - Auto Fly Cutting To Length - Runout Table - Auto Vacuum Stacker - Auto Packing Machine MAIN TECHNICAL DATAS Production Type : Continuous and automatic production Specification of Metarial : 0.3 - 0.

Press Machine Features: Water Heated Bottom Compression Hydraulic Press Surface Sheets St52 Certified Steel Parts Kroman Steel