Results for
NEDEX KIMYA SAN VE TIC A.S.
Turkey
NEDEX, which has been producing molecular sieve since 1999, is the only brand in the world focusing only on the insulating glass sector, supplying 30% of the molecular sieve amount in the world market and they are used in more than 55 countries. The products are presented in 4 categories as MULTIMOL, NANOMOL, NANOMOL-C, ZEOLAN-K, according to different market demands with their high water adsorption capacity, very low gas desorption values, granulation without broken particles, low electrostatic values and zero dust contents.
Request for a quoteAPERTE, UAB
Lithuania
Maximal - 3000 x 4710, 2800 x 6000, 2800 x 4710. Description - with laminated glass (VSG), with toughened glass (ESG), toughened coated glass (ESG) + laminated glass (VSG). DGU or TGU maximum thickness – 100 mm. DGU or TGU maximum weight – 800 kg (210 kg/lm. We have the ability to produce and XXL insulated glass units with max dimensions 3210 x 9300 mm. For XXL insulated glass units, please contact separately.
Request for a quoteAPERTE, UAB
Lithuania
Glass type - EW30, EI30, EI60, EI90, EI120. Max. tested dimensions range - 4200 – 2200 mm, Notes - IGUs may incorporated various types of coating e.g. LowE . They give additional functions in the form of thermal Insulation (factor U), solar protection (factor g), give a specific color of glass and reflective. Fire-resistant Glass Units may be bended.
Request for a quoteAPERTE, UAB
Lithuania
Maximal - 2000 x 4200, 4300 x 2800, 2800 x 5800. Description - with toughened glass (ESG) end laminated glass (VSG), with toughened glass (ESG) end laminated glass (VSG), with Touhened glass (ESG). Minimal radius (R) - Rmin – 800 mm (6-8 mm glass ), Rmin – 1000 mm (10-12 mm glass ) Rmin – 2000 mm (15-19 mm glass), Rmin – 1000 mm (6-8 mm glass ) Rmin – 1500 mm (10-12 mm glass).
Request for a quoteSAR-CAM GLASS
Turkey
Provides heat control and energy efficiency. Heating expenses are reduced. Do not compromise on natural day light and transparency. Reduces condensation on glass surface. Ensures maximum benefit from solar heat.
Request for a quoteSAR-CAM GLASS
Turkey
Thermally insulating glass (also known as low-emissivity or low-E glass) usually forms the inner pane of an Insulating Glass Unit (IGU). The glass has a transparent metallic coating that reflects heat from radiators or fires back into the room, rather than allowing it to escape through the windows. At the same time it controls solar gain and maximises natural light
Request for a quoteSAR-CAM GLASS
Turkey
Insulating Glass Units (IGUs) are designed to provide thermal insulation. They are used to reduce building heat loss and/or heat gain depending on the climate and glass configuration.
Request for a quoteSAR-CAM GLASS
Turkey
Insulating Glass Units (IGUs) are designed to provide thermal insulation. They are used to reduce building heat loss and/or heat gain depending on the climate and glass configuration.
Request for a quoteSAR-CAM GLASS
Turkey
Efficient heat control with insulated glass units system
Request for a quoteSTEKLO EXPORT
Russia
Float clear glass, from 8.0 to 12.0 mm for construction, interior decoration and safety.
Request for a quoteEGE KESKIN CAM ISICAM
Turkey
Isıcam Systems is a C Series product. It is produced with the production quality guaranteed by Isıcam Systems. It provides insulation and savings by preventing the heat inside from escaping to the outside. Advantages : -Isıcam Systems are produced by Isıcam Authorized Manufacturers who are regularly audited by Şişecam Flat Glass. -Isıcam brand is in production; -Glass and side materials are used in appropriate quality and quantity, It is the assurance that the production is carried out continuously under suitable conditions and using modern technologies.
Request for a quoteTEK METAL PROFIL
Turkey
Window spacer profiles are used to produce insulating glass. It creates space between the 2 glass panes and holds inside the Molecular sieve which will stop fogging of the insulating glass installed to the Windows of the buildings. Primary and secondary sealants are applied to the glass panes together with spacer profile to complete the combination and have a good sealed insulating glass unit which will withstand differant temperature conditions.
Request for a quoteTEK METAL PROFIL
Turkey
Thiokol is a special sealing compound for manufacturing insulating glass units. It is a 2 component sealing material which has excellent adhesion to clean surfaces such as glass, aluminium or steel. The mixture made from 1 part B component and 10 part of A component applied all arround the insulating glass unit will stop permeability of water and keep the Windows safe for long years.
Request for a quoteTEK METAL PROFIL
Turkey
These crystals are characterised by a three-dimensional pore system, with pores of precisely defined diameter. This diameter is in the dimension of the size of molecules such as water, CO2 and H2S. The pores can be adjusted to precisely determined uniform openings allowing for molecules smaller than its pore diameter to be adsorbed whilst excluding larger molecules, hence the name “molecular sieve”. The different pore sizes of synthetic zeolites open up a wide range of possibilities in terms of "sieving" molecules of different size or shape from gases and liquids.
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Our Infrared ovens can be produced as conveyor belt tunnel or internal return (U) type. Our ovens have andirect heating system with radiation heat transfer. They are used due to the cure flat shaped parts after wet or powder coating paint applications. They are preferred because they can cure the paint three times faster than the convectional type ovens. They can be produced with natural gas or lamp type infrareds. The inner surfaces of our ovens’ panels are produced with a galvanizedor stainless steel sheets and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thicknesses determined and rock wool or glass wool is used for insulation.
Request for a quoteARCHWOOD
Romania
Modern windows pursue functionality and minimalism, helping to create a contemporary and energy-efficient appearance of the building. Their design fits well in modern homes with an emphasis on brightness, spaciousness and energy efficiency. Europrofile wood, triple layered 68x78 mm, from NORDIC PIN or exotic wood - MERANTI. Insulated glass float + lowe - 24 mm. Aluminum teardrop Gutmann. EPDM gasket. ROTO NT hardware. REMMERS exterior water-based paint resistant to mechanical shocks and UV, applied in 3 starts.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ARCHWOOD
Romania
Arched windows add a distinctive architectural element, featuring a curved or segmented frame at the top. The arch offers a touch of grace and sophistication, highlighting the window design. Europrofile wood, triple layered 68x78 mm, from NORDIC PIN or exotic wood - MERANTI. Insulated glass float + lowe - 24 mm. Aluminum teardrop Gutmann. EPDM gasket. ROTO NT hardware. REMMERS exterior water-based paint resistant to mechanical shocks and UV, applied in 3 starts.
Request for a quoteARCHWOOD
Romania
Classic windows integrate elegantly into the structure of the home, with their fine wooden frames, accompanied by details such as corners and their sections. Europrofile wood, triple layered 68x78 mm, from NORDIC PIN or exotic wood - MERANTI. Insulated glass float + lowe - 24 mm. Aluminum teardrop Gutmann. EPDM gasket. ROTO NT hardware. REMMERS exterior water-based paint resistant to mechanical shocks and UV, applied in 3 starts.
Request for a quoteSEMIN
France
SUITABLE SURFACES All types of tapered-edge, paper-lined plasterboard, with or without insulation (glass wool, rock wool, polystyrene). COVERINGS First undercoat for plasterboard. Smoothing compound. PACK SIZE Tubs of 5 and 25kg on covered pallet. STORAGE 9 months in unopened original packaging, away from frost and extreme heat. AMOUNT REQUIRED Approximately 500 g/m² of plasterboard. DRYING TIME The second coat can be applied 24-48 hours after the first, depending on the ambient conditions. RECOMMENDED APPLICATION Always leave a minimum gap of 20 cm between doors and windows and the first plasterboard joint.
Request for a quoteSEMIN
France
COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 4 hours - Adhesion of the tape: > 1000 g - Density: 0.9 - Reaction to fire: A1 STORAGE 9 months in original unopened packaging protected from humidity. RATE OF MIXING 10 to 11 liters of water per 25 kg bag. APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings. The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.
Request for a quoteSEMIN
France
COMPOSITION AND APPEARANCE Powder coating based on plaster, calcium carbonate, resin, and various additives. The paste obtained is white in color. SUBSTRUCTURES ADMITTED All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with tapered edges and cardboard faces. COATINGS Printing undercoat for gypsum plasterboard. Plaster-based smoothing plaster. TECHNICAL SPECIFICATIONS - Setting time: 2 hours - Adhesion of the tape: > 1000 g - Cracking: no cracks up to 5 mm thick STORAGE 9 months in original unopened packaging protected from humidity APPLICATION Before treatment of the joints themselves, the panels must be filled between accidentally non-joined panels and various fillings. The application is done manually by "buttering" the thinned panels with a 10 or 15 cm coating knife and placing the strip. Then carry out a finishing pass, let dry and finish to mask the strip. Also mask the screw heads.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION CE 78 PERFECT’JOINT is a ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, thickener, pre- servation agent and various adjuvants. The paste is white. SUITABLE SURFACES All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with mitred edges and carded surfaces. COVERINGS Plasterboard primer. Smoothing filler. REFERENCE DOCUMENTS • CE marking • DTU 25.41 and DTU 25.42 • NF EN 13963 • DoP PACK SIZE 7 and 25 kg buckets. STORAGE 12 months in original unopened packaging away from frost and high temperatures. APPLICATION Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.). Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then ad- ding the tape (milled face against the jointing coa- ting).
Request for a quoteSKY ART SHADING LTD.
Turkey
Depending on the characteristics of the double glazing used in the Skymax system, up to 5.1* more insulation can be achieved compared to single glazing. The highest insulation was achieved in the glass balcony. Your balcony will be cooler in summer and warmer in winter. Another innovation in the glass balcony sector! Espagnolette lock. It is much more useful than standard chain locks with its stylish design and easy use. The optional built-in espagnolette lock provides more security. Sky Art engineers developed a special locking mechanism for the insulating glass balcony system. With the system called “ABL–Auto Brake Lock”, when the sliding glass panels come to the parking area, they are automatically locked and the wing can be opened without moving. In this way, the risk of falling and sagging when opening the wing is eliminated. In the system, in which a total of 28 mm (4+20+4 or 6+16+6) insulating glass
Request for a quoteSALT CAM
Turkey
Our company sells all kinds of Double-glazing Production materials used in the production of double-glazing in addition to the double-glazing aluminium profiles such as Ekoplast, Katplast 399 and Katplast 400, Katplast 600 thiokols, butyls, hotmelts, bonding silicones, dehumidifiers, clipses, Double-glazing chocks and corks wholesale with the most affordable prices.
Request for a quoteSALT CAM
Turkey
Aluminium Spacer Bar from 6mm till 24mm, standard, bendable and butyled.
Request for a quoteSALT CAM
Turkey
It is the main product for all kinds of glass applications. Insulation glass units, laminated glasses, tempered glasses, partially tempered glasses, enamelled glasses, curved glasses, coated glasses and mirrors can be produced by applying secondary operations on the product. They are produced in different sizes called as split, machine size and jumbo from 2 mm to 19 mm. They can be cut according to the sizes you demand.
Request for a quoteLUCA GLOBAL GROUP SRL
Romania
The GUTMANN CORA system can be designed as a double flap, single flap or angular flap. The CORA wood-aluminum system is based on the basic construction for standard wooden windows "IV 68" with a wood thickness of 68 mm per sash and frame. Therefore, no investment is required in special milling tools for the production of the wooden frame. The bottle is completely taken in the wooden box. Therefore, the insulating glass edge is excellently insulated against unwanted heat loss. The glass is exchanged from the inside by loosening the glass strip. Aluminum housing is a weather protection and an architectural element that can be freely designed in terms of color. The wooden frame ensures stability, excellent thermal insulation and gives the house a pleasant, familiar character. The aluminum frames are ventilated from the back and are attached to the wood with stable supports without tension: This allows the wood to breathe and the aluminum frame can expand without obstacles .
Request for a quoteQUARZGLAS KOMPONENTEN UND SERVICE QCS GMBH
Germany
Immersion heater for laboratory and electroplating technology Advantages: Maximum energy utilization through infrared radiation - the cladding tube is infrared permeable; through heat conduction - the cladding tube made of quartz glass enables particularly good heat transfer. Temperature resistance Since quartz glass has practically no thermal expansion, such immersion heaters are particularly resistant to heat changes. Acid resistance Quartz glass immersion heaters are almost resistant to acids except phosphoric acid above 300 ° C and hydrofluoric acid. They are therefore particularly suitable for the direct heating of chemicals in the laboratory and electroplating technology. electric security The cladding tube made of quartz glass is an excellent electrical insulator - safe contact protection; optimal electrical safety through earthing of the interior. In compliance with EC Directive 89/336 / EEC and EC Directive 73/23 / EEC.
Request for a quoteResults for
Glass insulators - Import exportNumber of results
89 ProductsCountries
Company type
Category