Gas regulator - Import export

The sun | power VR L valve regulated lead acid batteries are specially designed for high energy throughputs and are ideally suited for cyclic applications. They are characterized by excellent cycling properties during operation with partial discharge (Partial State of Charge - PSoC). In conjunction with the extensive capacity range, they are the battery of choice for village power supply. Other typical applications include emergency power supply, security lighting and grid services. The proven format according to DIN 40742 and the possibility of horizontal operation make the sun | power VR L battery versatile and furthermore provide the necessary flexibility for optimal space utilization.

Terrace Heater Ecoline available in stainess steel or steel powdercoated Up to 76 hours operating time burning systems are free adjustable radiates heat within a radius of ø 4,5 m wheels included european gas pressure regulator included

Ex thermostat or temperature regulator - Ex room thermostat - Temperature regulator for gas or surface temperature - Ex temperature limiter Ex zone 1 and 2

Electrical gas heaters for operating pressure up to 500 bar - Seal gas heaters, fuel gas heaters - Natural gas heaters for gas pressure regulation stations - LNG and LPG vaporizers - Vaporizers and heaters for industrial gases - Process heaters - Gas heaters for analysis and laboratory application ATEX, IECEx, TR-CU and other international certificates

Typically, the ASCO CO2 Gas Dosing System is used together with water desalination plants. The system is equipped with a CO2 pressure reducing valve, filtration unit, CO2 gas flowmeter, CO2 regulating valve, pressure gauges, safety valves and a completely prewired control cabinet. In case of maintenance the system provides a manual bypass line, which also can be monitored by the flowmeter. Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required

The fact that the benches are wheeled and mobile in modular laboratory systems provides the advantage of easy access in a possible revision of electrical and water installations. Additionally, this feature provides great convenience during laboratory cleaning. Shelf Systems consist of service columns and a horizontal shelf with a service unit with the same physical properties. It is also a type of column made of sheet metal at various heights and a shelf system that is baked at 200 degrees after being coated with anti-acid epoxy paint. Service lines such as gas, water, and electricity coming from the service unit, ceiling, or floor are designed to be laid systematically. The front panels, on the other hand, are designed to move up and down independently of the body block, with the suspension system in front of the body block; main shut-off valves, electrical fuse boxes, switchgear, gas regulators, and similar breakers are mounted on these panels.

Westron R32 tatngerant Gas is a ron ozone ccpf.r>g. low cfooal warmrg potential ana crcrgy tflictcnt retngerant gas that is suitaWe 'of varous coding applications. it is a pue, sngle compccerr. retrigcrart that has a tower tlammatalry man other altcfratrrcs. it is also ropensive ana accessittt: ana can rep you com ply with toe F-Gas phascacwn regulations. Westron R32 Retrigcrar*. Gas is manu'acturea 6y Al V;acc-3 Rc*ngcrant Gas iroustry LLC. crc ot :nc largest ana most rcpc*.actc re'ngcrant gas companies in :nc MMdc bast region You can trust Wcstrcr H32 Refrigerant Gas ter your ar conaitionra refrigeration, heat pump ar«3 ecfturiiai'cr reeds. Contact us toaay to learn mere accct our proaucts ana ser.ices!

If you want to explore MIG welding, Lincoln Electric's Handy MIG® machine is your ideal solution. Designed for flexibility and simplicity, this MIG welding machine is notable for its portability and ease of use, connecting to a 230V, 20 amp power source. Equipped with four voltage settings and a system for continuously adjusting the wire feed speed, the Handy MIG® is capable of welding mild steel from thin thicknesses up to 3.2 mm. The equipment is supplied almost ready to use, including almost all the accessories necessary to start MIG welding: a torch with mounted cable, an earth cable with clamp, a gas nozzle, a gas regulator with hose, a wire coil solid, contact tips, and a protective mask with filter plate and lens. You just need to add a shielding gas cylinder. Additionally, it includes a coil of self-shielded flux-cored wire, additional contact tips and a hammer with cleaning brush, expanding the functionality of the Handy MIG® for welding with and without gas.

— For the reliable fuel supply with gas — Preassembled for fast installation — Rigorous compliance with official requirements — Increased operating reliability — Also for biogas- and hydrogen-fuelled systems Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

The heating boiler UT-L offers high performance and is extremely compact. The design complies with the Gas Appliances Regulation. — Very high efficiency up to 105% for optimised energy costs — Compact design for easy positioning and effective use of heat — Flexible application and low return flow temperature of 50 °C possible — Specific control concept and optional real-time monitoring — Future-proof heat supply and options for CO2-neutral operation — Proven and durable Bosch system from a single source — Fuel: Oil, gas, multi-fuel firing, Biogas, bio-oil, hydrogen, special fuels

Propane Tank Gauge Level Leak Detector for QCC1 Propane Tank, Brass Propane Tank Adapter Pressure Meter Gauge

The VIKING-500 PRO semiautomatic welding machine has two-piece design, is designed for power supply from a three-phase 380V network and produces 500A at a load of 60%. The design feature consists in a separate feeding mechanism that can be removed from the source to a control cable length of up to 15 meters. The device heats up the product to a minimum, which allows you to work with thin metals. An important feature is the presence of a two-shaft motor for the wire inch (four rollers), which significantly improves the stability and smoothness of the welding material feeding. Special software functions significantly increase the performance factor of the device. ... Key features of VIKING MIG 500 PRO: - digital control of the device; - advanced software settings; - dot welding mode 2T and 4T; - setting of a smooth drop of the termination current; - adjustable inductance; - forced gas purging; - forced wire inch; - the presence of a 36 V socket (for connecting a CO2 gas heating regulator

Gas regulated recombination sealed batteries with valve . Maximum safety without maintenance with special acid pack with a kit for filling, enabling the acid to be introduced without any accidental spillage and with the guarantee of equal filling for all the cells. Great ignition power and limited auto-power loss. The use of Pb/Ca plates guarantees an increase in performance and life cycles greater than standard batteries. The AGM separator allows the complete absorption of the acid thereby avoiding hazards of leakage of electrolyte due to tilting or accidental dropping. The poly-propylene monoblock protects the plates from any knocks and external stress.

The 5L regulation valves are the ideal partner wherever the flow of gas or liquids need to be regulated. Due to the special design it is able to regulate and shut off media. Thanks to its light and compact design it can be used in panel mounting. It is maintenance-free and ideally suited for long-term use.

A clear matter: disposing of process water in an operationally safe manner After vibratory finishing, the process water contains solids and pollutants such as metals, oils and greases. To prevent these from entering the sewage system during disposal, you can clean your process water - even acidic or alkaline water - in our flocculation plants. You can then discharge the clear water into the sewage system in accordance with legal regulations. DO/GA flocculation units The PLC-controlled DO and GA flocculation plants are fully automatic solutions that purify up to 2,000 litres of process water per hour. If your daily water volume to be treated exceeds 3,000 litres, these plants are the right choice for purifying your process water. RT flocculation unit The easy-to-operate and inexpensive RT unit is suitable for you if you want to purify a daily water volume of up to 3,000 litres.

Gas pressure regulators of the RDU type are designed to reduce and automatically maintain gas pressure “after itself” using the set value. Gas pressure regulators of the RDU type are used at the facilities for main gas pipelines: Gas distribution stations, Gas purification and dehydration installations, Compressor stations, Gas fields. Distinctive features of the RDU regulators: The simplicity of the device, Tightness at complete closure of the valve, Possibility to automate the reduction process. Upper setting limit, MPa/(bar)-1.2/(12) or 4.0/(40) depending on the setting device. Lower setting limit, MPa/(bar)-0.15/(1.5) or 1.2/(12) depending on the setting device. More information on our website.

Gas pressure regulators of the RDU-T type with a heat generator are designed for automatic regulation of gas pressure “after itself” of the set value at the facilities of high pressure gas pipelines. They are used at: Gas distribution stations. Gas purification and dehydration installations. Gas fields. Compressor stations, etc. The regulators are designed for operation at ambient temperatures from +50 C to -40 C and relative humidity up to 95% at a temperature of +35 C. Distinctive features of RDU-T regulators: The RDU-T regulators differ from the RDU regulators of the same class by the heating of the shut-off and regulating device in the zone of gas throttling using specially mounted heat generators which operate without an external energy source by taking a part of the kinetic and potential energy of the compressed main gas. The heating temperature is sufficient to prevent hydrate formation processes. More information on our website.

Gas pressure regulators RD-M are designed to reduce and automatically maintain the gas pressure “after itself” at the set value. Gas pressure regulators of the RD-M type are used at the facilities for main gas pipelines: Gas distribution stations, Gas purification and dehydration installations, Compressor stations, Gas fields. Distinctive features of the RD-M regulator: Hydrate formation in the “seat-valve” contact zone does not affect the regulator operation. Tightness at full closing of the valve. Smooth regulation characteristics due to the use of an oil compensator. High accuracy of maintaining the set pressure. High maintainability (possibility to repair wearing parts without removing the regulator body from the reduction line). Possibility to automate the reduction process. Upper setting limit, MPa/(bar)-1.2/(12) or 4.0/(40) depending on the setting device. Lower setting limit, MPa/(bar)-0.15/(1.5) or 1.2/(12) depending on the setting device. More information on our website.

The gas pressure regulator of the RTBK type is designed for automatic regulation of gas pressure “after itself” at the facilities of high pressure gas pipelines, such as gas distribution stations, gas treatment and dehydration plants, gas fields, compressor stations, etc. The operating medium is natural gas and other gases that are not aggressive to regulator materials. Inlet working pressure: from 12 to 100 bar Output working pressure: from 1 to 12 bar Depending on the order, the modular regulator of the RTBK type can include the following elements: General-purpose body based on which the modular type regulator is built. Active module. Monitor module. Built-in shut-off valve. Shut-off valve as a separate element connected in series with the regulator body. Noise reduction module. And other technical combinations of modules and components. More information on our website.

2GRP 10/0.002 gas regulation point is equipment for supplying natural gas of the required degree of purification and odorization from the main gas pipeline to an individual consumer. Main application: supply of the household natural gas to the operator’s house, which is a part of the GDS. Gas regulation point is designed in climatic modification “Y” category 3 according to GOST 15150-69. +45/-50 C. You can use 2GRP 10/0.002 gas regulating point as a farm GDS if you order an additional complete set of the counter and the system of automation and parameter control. 2GRP 10/0.002 gas regulation point of its own design by the Kontact LLC has all necessary authorization documents and Certificates. Input pressure, MPa/(bar) - 1,2/(12) to 10/(100). More information on our website.

The main directions of our activity: Gas equipment for high pressure pipelines. We produce gas pressure regulators and setting devices, gas odorizing complexes, some equipment for CNG stations, shutoff valves and other products for the gas industry. Mining equipment such as components, control units and shutoff valves for operation in industrial complexes with hydraulic systems. Hydraulic lifting equipment: hydraulic supports and hydraulic cylinders. Non-standard equipment according to our customers’ design drawings. You can order equipment of any complexity and functionality from us. More information on our website.

Using 615gr Cream Chargers at home is slowly becoming the order of the day and is no longer only for high standards defined by chefs. However, as the demand rises, the number of inexperienced people who don’t use it properly increases. If you wish to make optimal use of this device, you must adhere to the guidelines that 615gr Cream Chargers users are required to follow:The ideal way to use a Cream Charger of 615gr like Fastgas is with a pressure regulator. Think about this option if you expect to bake some cakes with a nice finished-topping all day long. You can connect your siphon to your N2O gas cylinder or Cream Charger using the regulator up to 20bar. The regulator minimizes gas waste and provides more control in the cream filling process. HOW TO CONNECT A PRESSURE REGULATOR- STEP BY STEP: Connect the pressure regulator to the cylinder’s valve. Install one end of the hose to the regulator. You usually acquire a hose together with the regulator.

The RAPIDE L900 is the highest capacity gas filling system on the market and offers special advantages for the following applications fast filling and low gas losses particularly with krypton short filling times and extremely high capacity economic filling of extremely large formats fast filling of tripleglazed units in compliance with the cycle times of gas fill presses For development, this meant precisely regulating even larger gas quantities in the millisecond range. At the same time the universal implementation possibilities, the twohole technology and the proven closure system had to be retained. Nevertheless we were able to massively increase the efficiency. Here as well, and to an even more extreme degree, the same principle applies – namely that the maximum filling speed is not an expression of capacity. The crucial factor is efficient implementation.

This new air duster has numerous advantages. The propellant 1234 ze used is non-flammable and environmentally friendly. environmentally friendly with a GWP of only 6, the new propellant is well below the 150 limit of the European F-Gas Regulation. AIR DUSTER for contact-free and non-retaining removal of dust. Dust can scratch sensitive parts when removed mechanically. Therefore a contact-free and non-retaining removal of surface contamination is very important in many circumstances. Low weight and high capacity are very important for service- or repair work – a mobile compressor in your tool-box. The AIR DUSTER is based on multiply purified inert gas. DUSTING TOOLS turn your AIR POWER PRO into a multifunctional tool for cleaning by blowing or suction action, with antistatic effect or with extensions. Dusting Tools: GREEN CLEAN – Top Ventil # V-2000 GREEN CLEAN – Antistatic Set # V-2100 GREEN CLEAN – DualExender Set # V-2200 GREEN CLEAN – Mini Vac # V-3000 Advantages and...

This new air duster has numerous advantages. The propellant 1234 ze used is non-flammable and environmentally friendly. environmentally friendly with a GWP of only 6, the new propellant is well below the 150 limit of the European F-Gas Regulation. AIR DUSTER for contact-free and non-retaining removal of dust. Dust can scratch sensitive parts when removed mechanically. Therefore a contact-free and non-retaining removal of surface contamination is very important in many circumstances. Low weight and high capacity are very important for service- or repair work – a mobile compressor in your tool-box. The AIR DUSTER contains multiply purified gas. Every can is equipped with a standard aerosol trigger, including a flexible 15 cm capillary tube. Very pressure-stable because of the special GREEN-CLEAN Aerosoltechnology. Advantages and Properties of the GREEN CLEAN Aerosol Technology: ery high pressure non-inflammable Constant stable pressure chemically inert aero-mechanic