Gas installation - Import export

System press fittings from copper and copper alloys for copper pipes according to EN 1057 for flammable gases and interior gas piping with yellow sealing rings made from HNBR (hydrated nitrile butadiene rubber). SANHA®-Press Gas system fittings are tested according to BS EN 8537 and certified or approved by all relevant national and international certification bodies. Our system fittings are labelled with a yellow „PN 5 - GT/PN 1“ on the outside.

System press fittings from copper and copper alloys for copper pipes according to EN 1057 for solar and high-temperature applications for compressed air. SANHA®-Press Solar system fittings  have red moulded sealing rings made from FKM.

it is characterized by high chemical resistance to certain acids, oils and fats. It is easy to weld, but it does not conduct heat, it is nontoxic and harmless to people. It is made of containers for yogurts, bottles, tourist plates, cable insulations, bumpers, gas installation pipes. He also found application in the production of laboratory and medical equipment.

Magnetically coupledIn contrast to the standard pump, these products have a frictionless magnetic coupling. Oil leakage from a wear-prone conventional shaft seal is ruled out in these models Applications * - Installation in analyzers * - Installation in flywheels * - Gas technology Customer value * - Space-saving and ideal for systems integration * - High pumping speeds with small dimensions * - Low ultimate pressure * - Low-maintenance, no oil leaks from the shaft feedthrough * - Low operating costs, not necessary to replace shaft seals Duo 1.6 M * - Extremely low noise, ideal for laboratory applications * - Easy integration thanks to the UL and IEC 61010 certification of the entire pump * - With maintenance-free magnetic coupling

Screw-in Tubular Heaters are the standard solution for all heating processes with liquids or gas. The heater is installed in a tank or a tube system by the G1½" screw fitting. The IP54 connection head, fitting and tubular heater consists of stainless steel. The tube sheath material 1.4529 is resistant to sulphite, phosphors and hydrochloride media.

Bitumer Diplax is a special type of mineral and bituminous mixture used in the cold form. It can be used in all weather conditions at temperatures from -20 °C to +60 °C. It is prepared for immediate use directly from the package.It does not require the use of any specialized equipment. Damage repairs are waste-free and excess mix can be collected back into the container and used for another repair. Bitumer DIPLAX is used for: •express and permanent repair of damage to roads with asphalt and concrete surfaces. •for filling cavities after installation work: gas, plumbing, electrical, etc. •allows to eliminate damage of any shape, depth and size.

PGS is a locking device for pipes made of polycarbonate or polypropylene. It is designed to seal cap nuts to prevent their twisting and disconnection of pipes, as well as the removal of gas meters and installation of bridge cables for bypass devices for the purpose of stealing gas. The pipe locking device consists of two semicircular-shaped parts with additional holes for the sealing rope. To install the pipe locking device, it is necessary to connect both parts on the mounting nut, put the sealing rope into the special holes on the sides of PGS, and install the seal (rotary or latch one). The seal should be placed as close as possible to the locking device. The tamper-evident seal and rope will prevent intruders from keeping the fact of removal of the seal and the locking device from the nut unnoticed. When an attempt is made to perform certain actions with the aim to steal gas or water, visible signs appear on the seal, which is evidence

The Aerolift pipe lifting solutions are applied for many different situations and places. During production, storage, transhipment, and internal transport. For this specific situation we designed a lifting solution to handle bare and coated pipes aboard the ship. The ship, The Amazon, was converted to an ultra-deepwater J-Lay vessel. Our vacuum lifting devices are installed on 4 cargo hold cranes. In tandem mode the cranes will be used to load and unload 24-meter-long pipes in a cargo. The lifting devices are designed to limit deflection of double joint pipes or to handle the entire pipe by vacuum only.

During the Nord Stream 2 project several Aerolift lifting solutions were used on multiple locations. It is world’s largest pipeline project. During the project, a pipeline is laid through the Baltic Sea, which will transport natural gas over 1,200 km. From the world’s largest gas reserves in Russia via the most efficient route to consumers in Europe. Over 200.000 pipe segments needed to be handled. Almost all handling movements are carried out by an Aerolift lifting solution!

— For the reliable fuel supply with gas — Preassembled for fast installation — Rigorous compliance with official requirements — Increased operating reliability — Also for biogas- and hydrogen-fuelled systems Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

The GEMÜ 487 Victoria® soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox according to customer requirements. The butterfly valve is available in nominal sizes DN 25 - 600 and in various body versions such as Wafer, Lug and U section. — Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW) — Low torques — Simple installation — Modular construction — Extensive applications using a variety of materials — Advanced seal design - even for larger diameters — Body coating in accordance with ISO 12944-6 C5-M — Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination

GEMÜ 481 Victoria® soft seated butterfly valve has a metal actuator and is pneumatically operated. The butterfly valve is available in nominal sizes DN 25 - 600 and in various body versions such as Wafer, Lug and U section. — Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW) — Low torques — Simple installation — Modular construction — Extensive applications using a variety of materials — Advanced seal design - even for larger diameters — Body coating in accordance with ISO 12944-6 C5-M — Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination

Hot sale kids pedal bike baby balance ride on car children cycle kids balance bike bicycle tricycle Kids Balance Bikes Name:Baby balance bike Material: magnesium alloy Color: green，red Features Quick installation, one-piece gas-assisted process frame Age: 3 to 5 years Packing size 74*31*18cm Net weight: 4.8kg MOQ 10Pcs

Butterfly valves type ZIVA -G, PN10/16 Use: For drinking water and gas installations

Wafer type Butterfly valve ZIVA-Z - PN6/10/16 with worm gear Use: For drinking water and gas installations

Combustible Gas Detection - upgrade to upper class! Monitoring the environment for explosive gases most of the time you would be looking for hydrocarbons. It is a characteristic of hydrocarbons that they have a number of C - H bonds. These bonds absorb infrared light at a wavelength of 3,4 mm ( unsaturated hydrocarbons absorb at 3,3 mm ). This effect can be used to reliably detect these substances The most important advantage is that they are resistant against catalyst poisons and high concentrations. They can even be used in oxygen free atmosphere. Another important advantage of this technology is that a failure cannot go unnoticed. If an important component such as the lamp or the detector fails, the system will recognise this as 100 % absorption (an alarm situation). Most infrared gas detectors are designed as so - called NDIR (Non Dispersive Infra Red) double- beam detectors. This means, the light beam is divided in two portions with different wavelengthes. One is the measuring beam that will be absorbed by gas, the other is a reference beam at a wavelength that will not be absorbed by gas. This beam compensates for intensity variations of the lamp, dirt and corrosion. As the optics are mostly self maintained, an eventual inspection only checks if there is gas access to the sensor. Therefore much longer maintenance intervals compared to the catalytic sensor can be justified. As a rule of thumb, twice as long is OK. For plants which already have installed a combustible gas detection system, there is now a chance for a very cost- effective upgrade: The Statox 501 LC IR or LC MR! It consists of an EEx e (enhanced safety) terminal box and a sensor with integrated electronics. This sensor operates at the same supply voltage as a catalytic sensor. Its output signal is also identical to the signal of a catalytic sensor! This new innovative technical approach keeps the price in the same ballpark as catalytic sensors! All advantages of an infrared gas detector are now available for nearly the same price as a catalytic sensor and existing gas detection systems can now be upgraded without replacing the existing hardware. Of course the miniaturised chip inside the sensor cannot provide the same powerful electronics and software package as a high- end instrument, but however the new Compur Statox 501 IR LC features the most important advantages of an infrared system. So the next time maintenance is due with your gas detection system, check with Compur Monitors. The investment for an upgrade might pay back within one maintenance interval.

Utilities personnel working on Gas Insulated Switchgear are in danger from exposure to SF6 gas leaks. Colourless and odourless, SF6 can accumulate undetected, presenting serious health and environmental risk. The EMT GasSafe Gas Leak Detection System offers a feature packed solution to monitoring real time gas leaks from electrical equipment or potential other unsafe gaseous emissions. Our gas safety system provides rapid detection, immediate response and early warning in the event of gas leaks or an unsafe working environment, ensuring personnel safety and asset protection. Ideal for traditional SF6 and new SF6 alternative gas installations. Provides an intelligent and comprehensive solution to your SF6 F-Gas leak detection requirements. Measurement of over 400 different gases and vapours from ppm to %Vol. Easily add or remove sensors and accessories as your system needs grow with up to 128 detectors on a single control panel.

FMS - Flexible manufacturing system – customised by igm for your purpose For special applications, igm produces customized welding systems fulfilling your individual requirements. The applications successfully installed range from gas bottles machines, flexible manufacturing cells to complete production lines. Customised robot systems: In these flexible systems more than just the welding technology is required: loading, conveying, stretching, bending, cutting, measuring, manipulating, editing, storing, unloading, controlling. Complex manufacturing tasks require flexible solutions. Since many years igm is experienced in engineering and realisation of full automatic manufacturing lines for various piece parts. For additional production requirements we provide handling devices, we develop special purpose machines and take care of your whole project as a main contractor, from order placing up to final commissioning . Basic concepts of flexible manufacturing lines: FMS for a single...

The H2Smart™ is an integrated sampling system designed to measure hydrogen content with high accuracy in nitriding and nitrocarburizing atmospheres and to calculate the parameters necessary for process control. Its unique measuring cell design and advanced electronics eliminate the need for a reference gas cell, thus simplifying the installation and usage. Moreover, the measuring cell is maintained at a set temperature to protect the system from condensation and contamination during nitrocarburizing and post oxidation processes. An integrated sampling pump with variable output insures reliable flow through the measuring cell. The sampling flow is continuously measured via an integrated mass flow meter, and, if necessary, the flow is adjusted by changing the pump output. In this manner, the closed-loop flow control assures reliable H2 measurement and thus accurate nitriding and nitrocarburizing control.

Liquid PTFE sealant for threaded metal accessories. Certified for use in gas installations, according to UNE EN 751-1. Suitable for use in drinking water systems

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

Pipe products, which constitute a very wide variety according to usage needs, are produced in different shapes for different needs, such as galvanized with stainless steel, in black color, for natural gas installations or for boiler systems. Our pipe products, which have high material quality, can also be preferred as round, square, rectangular or thick-walled seamless products that can also be used as profiles.

The BCP-H2 model is manufactured by Bluesens, and is a hydrogen analyzer that is easy to integrate directly into the gas lines. It has a cost effective and robust design, which has an in-situ gas analysis. The unit has a direct integration in gas pipes, and has installation of additional gas pipes is not necessary. It has a fast installation due to its standard connection with low maintenance costs. It can be utilized in wide variety of applications including chemical industry, biogas production and agriculture.

Gas pressure regulators of the RDU-T type with a heat generator are designed for automatic regulation of gas pressure “after itself” of the set value at the facilities of high pressure gas pipelines. They are used at: Gas distribution stations. Gas purification and dehydration installations. Gas fields. Compressor stations, etc. The regulators are designed for operation at ambient temperatures from +50 C to -40 C and relative humidity up to 95% at a temperature of +35 C. Distinctive features of RDU-T regulators: The RDU-T regulators differ from the RDU regulators of the same class by the heating of the shut-off and regulating device in the zone of gas throttling using specially mounted heat generators which operate without an external energy source by taking a part of the kinetic and potential energy of the compressed main gas. The heating temperature is sufficient to prevent hydrate formation processes. More information on our website.

Gas pressure regulators of the RDU type are designed to reduce and automatically maintain gas pressure “after itself” using the set value. Gas pressure regulators of the RDU type are used at the facilities for main gas pipelines: Gas distribution stations, Gas purification and dehydration installations, Compressor stations, Gas fields. Distinctive features of the RDU regulators: The simplicity of the device, Tightness at complete closure of the valve, Possibility to automate the reduction process. Upper setting limit, MPa/(bar)-1.2/(12) or 4.0/(40) depending on the setting device. Lower setting limit, MPa/(bar)-0.15/(1.5) or 1.2/(12) depending on the setting device. More information on our website.

Steam is a pressure vessel manufactured to store excess steam or waste vapors out of the operation of aquaria and to be used again when necessary. They are mainly used in gas concrete installations especially for the purpose of recovering the waste steam from the process. There are water and vapor phase zones in the steam chamber. The volume is 4/3 water phase. Steam The steam is stored in the battery in the hot water phase by injecting the steam into the water by means of the diffusers located below the water level and dissolving it in the water. When the steam is needed, the pressure of the hot water is lowered and the steam produced by the resulting phase change is transferred to the process to be used again. Using a steam bath; Up to 25% energy saving is achieved. They can both discharge steam and discharge at the same time. Suspended solid materials which are dragged together with the steam collapse under the liquid and the bluff is removed from the environment and the steam is

Gas pressure regulators RD-M are designed to reduce and automatically maintain the gas pressure “after itself” at the set value. Gas pressure regulators of the RD-M type are used at the facilities for main gas pipelines: Gas distribution stations, Gas purification and dehydration installations, Compressor stations, Gas fields. Distinctive features of the RD-M regulator: Hydrate formation in the “seat-valve” contact zone does not affect the regulator operation. Tightness at full closing of the valve. Smooth regulation characteristics due to the use of an oil compensator. High accuracy of maintaining the set pressure. High maintainability (possibility to repair wearing parts without removing the regulator body from the reduction line). Possibility to automate the reduction process. Upper setting limit, MPa/(bar)-1.2/(12) or 4.0/(40) depending on the setting device. Lower setting limit, MPa/(bar)-0.15/(1.5) or 1.2/(12) depending on the setting device. More information on our website.

The GAS TESTER is our lowestprice entrylevel model for monitoring gas concentration. Naturally we have installed our proven analysis technology in this product as well. Features reliable concentration measurements compact and handy design easy operability argon and krypton use optional data storage Only a small quantity of gas is required. Sampling is executed with a special gas supply pump. The GAS TESTER is suitable for quality control of IG units with argon or krypton as the filling gas. If you desire to also analyse other gas types or gas mixtures, you should chose one of our other analysers.