G fitness - Import export

igus® pulley Roller with press-fitted iglidur® G bearing Material: PA2200 and iglidur® G Lubricant free Quiet Resistant to corrosion robolink® multi-axis joint robolink® Configurator

Form C and F: Ball steel, ball seat high-carbon steel. Form G and J: Ball high-carbon steel, ball seat steel. Version: Form C and F: Ball hardened and black oxidised, ball seat phosphated. Form G and J: Ball phosphated, ball seat hardened and black oxidised. Note: The self-aligning pads serve as stops, rests and thrust pads in fixture construction. The seating face returns to the start position when the load is removed. Ball secured against rotation. Drawing reference: Form C: male thread, flattened ball, smooth Form F: male thread, flattened ball, diamond grip Form G: press fit, flattened ball, smooth Form J: press fit, flattened ball, diamond grip

Body carbon steel. Ball, ball bearing steel 1.2067. Form D: Ball with POM insert. Form H: Ball with POM insert. Form K: Ball with carbide insert. Form M has a carbide ball. Version: Body tempered and phosphated. Ball hardened. Form M ball nickel plated. Note: Self-aligning pads serve as stops, supports and thrust pads in fixture constructions. Ball secured against rotation. * Valid only if the minimum bore depth is observed. Drawing reference: Form C: with male thread, flattened ball, smooth. Form D: with male thread, flattened ball, with POM insert. Form F: with male thread, flattened ball, diamond grip. Form M: with male thread, flattened ball, with carbide insert. Form G: press fit, flattened ball, smooth. Form H: press fit, flattened ball, with POM insert. Form J: press fit, flattened ball, diamond grip. Form K: press fit, flattened ball, with carbide insert.

Braided from Expanded Graphite Tape Reinforced with Inconel Matrix and special PTFE impregnation Characteristics No slip stick effect High cross section density High temperature resistant to minimize emissions Non hardening, good reset capability Coefficient of thermal expansion similar to steel Easy to cut, install and disassemble Low coefficient of friction minimizes the adjustment force in valves Recommended as die formed rings For valve applications rings should be approx. 25 - 30 % compressed at installation Operating range Pressure [p max]: 300 bar Temperature: t = -200… +300 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application Valves Fittings Gate valves Flaps Door and lid seals Suitable for Power plant technology Boiler houses High pressure applications Approvals ISO 15848-1 CC1 TA Luft 300 / VDI 2440 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 -...

100 % PTFE Fiber with special PTFE Dispersion Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.80 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals BAM FDA conformity EN 1935:2004 in...

Expanded natural Graphite in Purity 98 % – industrial grade or 99.85 % nuclear grade (chlorine content < 20 ppm) Temperature in steam Density min. 1.40 g/cm 3 Characteristics High cross section density Self lubrication and limited wear Dry running capability Coefficient of thermal expansion similar to steel Maintenance free and elastic, also under variable pressure Non ageing, high chemical resistance Attention! Precise tolerances and surfaces of application are requeste Operating range Pressure [p max]: 800 bar Temperature: t = -200… +550 °C pH: 0 - 14 Density: 1.80 g/cm³ Temperature in steam Density min. 1.40 g/cm 3 Main application Fittings Pumps (high temperature) Covers Valves Suitable for Valves and fittings of all Industries Approvals Oxygen BAM 200 °C/250 bar DVGW and KTW Variant Rings with integrated reinforcement or endcaps made from ANSI 316 Special quality TA Luft 300 with a leakage rate of 5.7 · 10 -3 mbar · l/(s·m) 300 °C Form of delivery ARF rings - endless,...

Goodridge 811 series patented reusable fittings are designed for the G-Line XF-910 and XF-811 hoses. The 811 reusable fittings range can be assembled using basic hand tools.

The G-Line XF 811 is the stainless-steel braided equivalent to the G-Line XF 910. The hose features a smooth bore, externally convoluted, carbon impregnated, anti-static PTFE liner, wrapped in a Stainless Steel braid. In addition to the 711 crimp and 4000 series crimp/draw swage fittings, the G-Line XF 811 hose can be assembled using 811 reusable fittings, without the need for specialist tooling.

The G-Line XF 910 is the lightest smoothbore hose in the Goodridge range. The hose features a smooth bore, externally convoluted, carbon impregnated, anti-static PTFE liner, wrapped in a super lightweight Aramid fibre braid. In addition to the 711 crimp and 4000 series crimp/draw swage fittings, the G-Line XF 910 hose can be assembled using 811 reusable fittings, without the need for specialist tooling.

"Instant cut flakes «Fitness. Oatmeal flakes with bran».by Firma DІAMANT LTD, LLC manufactured according to TU U 15.6-13929625-001:2011 For the manufacture,we use whole grain oat groats that has been double purified, which eliminates the presence of flower films in the finished product. The use of very gentle grinding and steaming modes helps to save the maximum amount of useful nutrients in the product. Preservatives and artificial nutritional supplements are not used in the production of the product. One serving (50 g) of “Fitness” flakes with bran of “Kozub Product” TM contains half of the daily norm of soluble natural fiber for an adult. Flakes do not need cooking." Type of packaging: paper package Energy value (calorie) per 100 g of product: 1445 kJ (345 kcal ).

Polarization: 99.70% degrees min Ash by electrical conduct: 0.08% max (on dry weight basis) Ash content: 0.04 max Moisture: 0.08% max Icumsa (International Commission for Uniform Methods of Sugar Analysis): 150 RBU max, Brazil S.G.S. scale. Method n°.: 4-1978 Solubility: 100% dry and free flowing Color: crystal white Radiation within: Within internationally accepted limits Granulation: Fine white crystals to medium Sugar IC 150 Magnetic particles: 4 mp/k So2: 15 mg/kg Sulphor dioxide: 20 mg/kg min Sediments: none Smell: typical and specific for sugar Reducing sugar: 0.05% max by weight Npn staph aureus: not detected in 1 gram Maximum AS: 5 p. p. m. Maximum PS: 2 p. p. m. Maximum CU: 3 p. p. m. Substance: solid crystal Tolerance: 5% (+/-) Microbiological: Pathogenic bacteria incl. Salmonella per 1 g: NIL Fit: for human consumption Crop: Current Shelf life:2 years Pesticide traces: DDT: 0.005 mg/Kg Photoxin: 0.01mg/Kg Hexachloran Gamma Isomer: 0.005 mg/Kg

Convenient to take along and to work (box, 80 sachets, 40 g) The functional sweetener Prebiosweet Fitness is not only safe, but also good for health. It contains 10% of the world-famous lactulose, the prebiotic No. 1. Lactulose stimulates the growth and activity of beneficial intestinal microflora. Prebiosweet Fitness is a universal sweetener: for drinks, pastry, desserts. Zero proteins, zero fat, zero calories. And yet it is pure sweetness. Indicated for diabetics. Essential for a carbohydrate-free diet, for skin fasting, it helps to lose weight and stay in shape

LAST TYPE : % 100 Natural Leather INNER LINING : % 100 Natural Leather & Textil SOLE : Polyurethane INSOLE : Removable Anatomic Leather Covered Memory Fuspet FITTING TYPE : Standard (G) Fitting