Flow measurement - Import export

Electrodynamic flow sensor for the measurement of low flow rates from 0 to 100 kg/h. For pipe diameters up to 1 m. Ideally used in leanphase conveying. In free fall conditions with at least 2 m/s drop speed. • suitable for very low concentrations • ceramic coating prevents sensor wear

The BATCHFLUX 3100 is an electromagnetic flowmeter (EMF) for rotary or linear filling machines. It is the economical solution for filling applications with conductive liquids.Due to its unique ceramic measuring tube, the mag meter features good repeatability and long-term stability. The flowmeter has an ultra-compact lightweight housing ideal for the tight spaces in volumetric filling machines. It can be used for filling of water or carbonised drinks. The EMF is suitable for common CIP cleaning procedures.

PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND NEARLY MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow mechanical - as a replacement for the current and widely used standard measuring variant with impeller or turbine - now makes mechanical measurement according to the differential pressure principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. A completely non-contact flow measurement based on the ultrasonic principle is available with the proflow ultrasonic. Robust flow measurement in consumer return line PT 1.000 temperature measurement in consumer return line 6 x 2 consumer channels 3/4“ female screw thread 1 x 2 main connection 1“ female screw thread Available in three temperature variants: operating temperature up to 100°C, up to 160°C and up to 180°C Max. flow rate each channel:: 25 l/min or 50 l/min

MULTI-ZONE TEMPERATURE CONTROL- AND MONITORING SYSTEM WITH NON-CONTACT FLOW MEASUREMENT. Due to the design, dimensioning and selection of the used components, enersave temperature control systems are the most efficient systems on the market with the highest flow rates at operating point. By using the frequency inverter, the already high basic efficiency is optimized and the pump characteristic curve will be optimally adapted to the respective operating conditions. The flow measurement of the individual temperature zones is carried out using noncontact measurement technology according to the ultrasonic principle.

The Valve-Tronic Plus™ is designed for use in highly demanding industrial applications that require accurate flow control and measurement. It can function as a stand-alone controller for basic applications or become an integral part of a process control system for automatic flow control. FEATURES • Large LCD displays actual flow rate, totalized flow, valve position, alarms, and diagnostic messages • Field programmable engineering units • Magnetic sensor technology immune to problems related with dirty oil • Configurable to control based on rate of flow or valve position for applications where the Process Variable (PV) is Dew-point, Carbon Potential, etc. • Standard Modbus TCP for easy integration with control systems • Manual actuation of value possible • Field calibration for null and span • Advanced polynomial calibration for high accuracy over the entire range of the meter • Built-in Web Server with remote access to device • Full PID setpoint control The VALVE-TRONIC Plus™...

Continuous flow measurement of powder or granules in high pressure densephase conveying. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. • pressureresistant up to 64 bar • maintenancefree • contactless • ATEX category 3 approved

Continuous solids mass flow measurement in densestream conveying and high levels of throughput. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. • unlimited throughput volumes can be measured • no wear thanks to the ceramic inner pipe • simple retrofitting • maintenancefree

Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no venturi or similar conversions are required. • easy to retrofit • no calibration necessary • output in operating cubic metres • suitable for all diameters and geometries

Microwave sensor for contactless monitoring of material flow in air slides. • easy to install • easy to retrofit • gives trending information by 4 20 mA output • immediate alarm when flow is interrupted

Electromagnetic flowmeter, designed to measure bulk material flows up to 300 t/h. The meter has no mechanical parts in the flow, is 100% dustproof and erosion free because of ceramic inner pipe. • arbitrary mounting position (inclined/free fall) • low headroom required • easy to calibrate

The flow scale is ideal for mechanical conveying systems with continuous flow measurement. It is also used with vertical systems and belt conveyors. The ability to work in very small spaces due to its compact design, The ability to be easily installed, It is not affected by dust due to the measurement sensor being out of the process, Flow measurement and control during flow, flow measurement and control between 0.5-40T / S. Motor controlled feeding and integrated measurement system, dosing, flow rate control in percentage or kg / h, precise flow measurement and control with Loadcell, There is no pneumatic control in Akar scale. The system has no air dependency. The desired product mixture is made according to the values ​​entered from the flow scales placed under the wheat silos from the computer or the operator panel on the scale.

Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories Features & Advantages ◾ Complete control of the PLC ◾ High speed weighing and long service life thanks to the stainless steel load cell ◾ Special protection class IP 67 ◾ Easy calibration ◾ Various feeding system according to the type of product to be weighed ◾ Data information based on actual weight values ◾ Bulk flow measurement as required Show in total value weighed ◾ The ability to work individually or in a network

Instantly measure and display of humidity and hectoliter of wheat Calculation of water flows according to the required humidity. Automatic water dosage according to the calculated water flow value Automatic water dosage according to the wheat flow variation by the connection of wheat flow control or measure unit Alarms of failure More than one humidity – hectoliter measuring unit and water the dosage unit can be controlled by the PLC control unit.

The IST AG FS2 flow sensors are applicable in gas and offer excellent long-term stability. In addition to measuring flow rates, the FS2 gas flow sensor is able to detect flow direction with outstanding sensitivity. Further advantages of the FS2 thermal mass flow sensor include: — Simple signal processing — Simple calibration — Bare sensor resists up to +450 °C (customer specific) — Stable platinum technology — Excellent reproducibility — No moving mechanical parts — Customer-specific sensor available upon request The IST AG FS2 flow sensors are optimal for measuring gas flow and direction.

The IST AG LV5 sensor is a flow-through biosensor and offers the possibility for multi-parametric measurements, since up to 4 analytes can be measured simultaneously (glucose, lactate, glutamine, glutamate). The sensor features a very small flow cell (1 µL) and therefore requires minimal sample volumes when used as an analyzer. Further advantages of the LV5 biosensor include: — Excellent long-term stability over a month in continuous measurement mode (lifetime varies depending on various factors, including the analyte concentration and buffer system (medium) amongst others) — Long shelf life (under appropriate environmental conditions) — Gamma and beta sterilization compatible — Suitable for continuous and analyzer measurement modes — Fast response time (depends on the buffer system (medium)) — Reference, counter and blank electrodes on-chip — Integrated flow cell (various volumes) Suitable for sampling systems in laboratories or food and pharmaceutical industries.

The SFS01 is particularly suitable for low flow velocities up to 3.5 m/s (in gases). It shows very fast measurement results of the flow rate as well as the flow direction. The Silicon Flow Sensor SFS01 offers three main characteristics: — Very fast response time <5 ms — Very low energy consumption — Easy system integration including temperature compensation Well-adapted channel geometries allow the performance of the sensor to be optimally aligned to the desired application. The SFS01 flow sensor is ideally suited for space-limited applications, but can also be easily upgraded to complete ready-to-use systems. Suitable application areas for the SFS01 flow sensor are flow measurements in battery-operated / portable devices, air conditioning technology (HVAC), automation technology as well as process and control engineering.

For measuring flow rates using a symmetrical heater design and having an excellent sensitivity and reproducibility. It has a plastic housing for fast mounting into a flow channel

The IST AG MicroFlowSens (MFS) technology was developed for fast flow measurements. Due to the membrane system, the thermal mass is reduced to the minimum resulting in a very fast response time and low power consumption. In addition to measuring flow rates, the MicroFlowSens offers an outstanding sensitivity and is able to detect flow direction. The MFS flow sensor is optimal for limited space system integration and is available as integrated sensor on a PCB. Further advantages of the MFS thermal mass flow sensor include: — Excellent solution for applications with high flow rates and fast response time in CTA mode — Very high measuring dynamic with CTA mode (10'000'000 : 1) without bypass — Excellent for the measurement of very low flow rates and leakage detection with bridge mode — High chemical resistance against aggressive gases and vapors — Different sensitivities, circuit topologies available — Detection of flow direction — Customer-specific sensor layout upon request

The IST AG FS7 thermal mass flow sensors are the successors of the FS5 flow sensors and exhibit a symmetrical heater design and enhanced sensitivity. The FS7 flow sensor is applicable in gas and offer excellent long-term stability. The small thermal mass of the FS7 sensor provides a fast response time. Additionally, the standard FS7 sensor is also available with a housing which is easily implemented into various applications. Further advantages of the FS7 thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request. The IST AG FS7 flow sensors are optimal for measuring gas flow in various flow applications.

The IST AG FS7.4W gas flow sensor has been developed for applications with temperatures up to 400 °C. The design of the FS7.4W is based on the FS7 design which offers a symmetrical heater that enhances sensitivity. The FS7.4W flow sensor is applicable in gas and offers excellent long-term stability. The small thermal mass of the FS7.4W sensor provides a fast response time. Further advantages of the FS7.4W thermal mass flow sensor include: — Easy adaptation in various applications and housings — Excellent long-term stability — Simple signal processing — Simple calibration — Stable platinum technology — Excellent reproducibility — Customer-specific sensor available upon request The IST AG FS7.4W flow sensors are optimal for measuring gas flow in various flow applications.

A simple solution to identify failure of a fabric filter baghouse, cartridge filters or cyclones. Ideally suited to applications from 0.1 mg/m³, it provides an immediate alarm in case of a filter break. • detects all dust types • relay alarm output • usable in clean gas and any metallic dust channels • very simple and fast retrofitting • immediate detection of filter damages • simple commissioning (plug & play) • excellent price/performance ratio

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as Paints, lacquers, mineral oils, acids, alkalis, mineral oils and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

The flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating oval wheel meters and the magnets placed on the measuring wheels, it enables precise measurement of the volume flow and measures non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and, above all, efficiently. * Optionally available in explosion-proof design * Examples of media: Paints, varnishes, mineral oils, acids, alkalis, mineral oils, solvents * Measurement according to the oval gear principle * High measuring accuracy due to overrun correction * Touch screen display with self-explanatory, multilingual user interface * Relay module for volume preselection can be retrofitted at any time * Approved in accordance with ATEX Directive 2014/34/EU, Category 2

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, paints, lacquers, mineral oils, solvents, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

Easy to operate, compactly built and quick to mount on all Drum- and container pumps: the new Lutz Flow Meter TR3 in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber allows it to be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently. * PP for neutral and aggressive media * Media examples: Glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc. * Two 1.5 V batteries (AAA) interchangeable Features & Advantages * Measurement according to the turbine wheel principle * Display of partial and total quantity * Variable display orientation * Mobile on a Drum pump or with nozzle connection * Measuring range from 5 l/min - 120 l/min * Easy battery change

The CWL Max is a top performer of the dynamic scales in the logistics area. Available as a dual or triple scale, the weighing system particularly shows its strength by reducing distances between packages when working with different package sizes. The dual scale CWL Max is making use of the technical advantages of two or three integrated weighing systems by selecting the ideal weighing system based on package length. Therefore it efficiently establishes the weight value even if the next product is already waiting.

The dynamic in-motion scales of the CWL series are specifically designed for the requirements in the logistics industry. Even in case of high speeds or high loads the verifiable checkweighers or catchweighers provide accurate weighing results. Design your individual solution with the variety of models and options. The CWL-L can be easily integrated in your intralogistic conveyor system, e.g. sorting application, infeed line or parcel shipping system. Efficiently configured and parameterized by means of the provided Bizerba software configuration tool it impresses as a catchweigher with its fast and exact weight determination ‒ even at high speeds of up to 3.1 m/s.

Discover precision, quality and maximum freedom in planning: With its stainless steel frame and the high IP65 protection the CWL-I is perfectly suitable for demanding industrial requirements. This verifiable checkweigher or catchweigher reliably provides precise results at high loads. Realize the optimal solution for your needs with a large model variety and numerous options. Easily integrate the CWL-I in your internal conveyor system whether it is a sorting application, infeed line or a shipping system. Efficiently configure and parameterize your solution with the included Bizerba Configuration Tool software.

The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission measurement. • continuous, precise and reliable dust quantity measurement (mg/m³) • dust measurement possible in large channel diameters • output of dust concentration as absolute value • ATEXcertified • measurement of dust concentration at high temperatures or harsh environments • trend signal or absolute value