Evaporators - Import export

Evaporation coils are available in many different lenghts, diameters, coil lenghts and coil pitches. These resistance heaters with their very high melting points will bring practically any metal to the boil. At the same time, their high corrosion resistance and outstanding material purity prevent any contamination of the substrate. The range includes evaporation coils made of the following materials: — Grain stabilized tungsten (WVM) for the evaporation of aluminum — Tantalum — Molybdenum — Molybdenum-lanthenum (ML) for particularly long service lives

Evaporation boats made of tungsten, molybdenum and tantalum are available in many different widths, lenghts, material thicknesses and volumes directly in the Plansee Online Shop: www.plansee.com/shop. Special dimensions are available on request.

EV SERIES SHELL&TUBE EVAPORATORS RANGE FROM 20KW TO 1510 KW COOLING CAPACITY IN EVAPTON'S STANDARD CONDITIONS. THE REFRIGERANT SIDE CAN BE MANUFACTURED FROM 1 CIRCUIT TO 4 CIRCUITS. EV SERIES EVAPORATORS CAN BE USED WITH HCFC AND HFC REFRIGERANTS WITH MEDIUM TO HIGH SYSTEM PRESSURE (30-45 BAR). EVA SERIES EVAPORATORS CAN BE MANUFACTURED BOTH IN STANDARD CATALOG SIZES AND IN THE SIZES REQUESTED BY THE CUSTOMER. EVERY EVAPORATOR MANUFACTURED IS CONTROLLED BY UNILAB LICENSE PROGRAM FOR CAPACITY AND PRESSURE DROPS AND TRANSMITTED TO THE CUSTOMER. EVS - SINGLE CIRCUIT EVAPORATOR EVD - DOUBLE CIRCUIT EVAPORATOR

For the thermal separation of a mixture a thin film is produced at the heated wall of a cylindrical or conical evaporator. A distribution ring on the rotor distributes the liquid evenly across the periphery. Then, the blades fitted at the rotor spread the liquid as a thin film of min. 0.5 mm over the heat transfer surface. The model concept for the flow in the thin film evaporator assumes that prior to each rotor blade a bow wave is formed. In the gap between the rotor blade and the heating surface, fluid is supplied from the bow wave of a highly turbulent area with intense heat and mass transport. This results in a good heat transfer performance even with viscous products. In addition, the formation of deposits is avoided and the intensive mixing also protects temperature-sensitive products from overheating.

Because of the thermal sensitiveness of products, this separation method is applicable. The sample to be distilled is exposed only for a very short time to the heating substances because the film, created by the wiper, can evaporate very quickly. The residence time of medium on the heating surface is a matter of seconds, thus essentially less than in a reboiler flask, circulating evaporator etc. The evaporated product (operation pressures down to 103 mbar and temperatures up to about 300°C) has to pass a “short path” to the condenser only, which is located in the middle of the evaporator. Evaporators in borosilicate glass 3.3 are available with heat exchange areas 0.02…0.8 m². Evaporators in stainless steel can be heated by a heating jacket to higher temperatures with more heat transfer area for higher throughputs.

Because of the thermal sensitiveness of products, this separation method is applicable. The medium which is to be distilled is exposed only for a very short time to the heating substances because the film, which is created by the wiper, can evaporate very quickly. The residence time of medium on the heating surface is a matter of seconds, thus essentially less than in a reboiler flask, circulating evaporator etc. Evaporators in borosilicate glass 3.3 are available with heat exchange areas 0.02…0.8 m². Alternative design versions in stainless steel for higher throughputs are available upon request. Please equire.

SONKAR

A quartz material / glass-encased, spiral-shaped, electrical heating coil with a large surface, which is mounted in a quartz material reflector shell with a handle, allows liquids to be heated indirectly by infrared radiation. This is used for the fast, economical evaporation or concentration of liquids. Due to this principle, only the surface of the liquid is heated very strongly, as the thermal radiation is absorbed even after shallow penetration, thus enabling gentle, uniform evaporation.In contrast to boiling evaporation, there is no loss of substance due to splashes from a moving boiling surface. Since surface evaporators are made exclusively from the material fused quartz / glass, it is possible to use the advantages of the material, such as good IR permeability, heat and heat change resistance, lowest electrical conductivity, exceptionally high chemical purity and resistance as a material. It complies with EC Directive 89/336 / EEC and EC Directive 73/23 / EEC.

Boron nitride can be long-term used at 1800 degrees under vacuum atmosphere. With gas protection, Boron Nitride can be used at 2100°. Boron Nitride is with high thermal shock resistance, no cracks under extreme cold & high temperature. If you take out Boron Nitride from 1000 degree furnace and colding it within short minutes. It still won't break even repeat this test with 100 times. Material Properties： * High thermal conductivity * Excellent thermal shock resistance * Low thermal expansion * Exceptional heat resistance * Good Chemical Inertness * High electrical resistance * Low dielectric constant and loss tangent * High volume resistivity * Excellent machinability Grades 5 grades of boron nitrides are involved in Boron Nitride product series. * BN99 ● CABN ● ALBN ● ZRBN ● ZABN ● SB

You may not have a drainage point for the water generated during the cooling cycle. It is possible to vaporize and eliminate the condensed water with the DWE Series Drain Water Evaporators. Multiple cooling systems operating in the same location can be connected to a single DWE unit, thus, providing you with a compact and low- cost solution.

EV SERIES SHELL&TUBE EVAPORATORS RANGE FROM 20KW TO 1510 KW COOLING CAPACITY IN EVAPTON'S STANDARD CONDITIONS. THE REFRIGERANT SIDE CAN BE MANUFACTURED FROM 1 CIRCUIT TO 4 CIRCUITS. EV SERIES EVAPORATORS CAN BE USED WITH HCFC AND HFC REFRIGERANTS WITH MEDIUM TO HIGH SYSTEM PRESSURE (30-45 BAR). EVA SERIES EVAPORATORS CAN BE MANUFACTURED BOTH IN STANDARD CATALOG SIZES AND IN THE SIZES REQUESTED BY THE CUSTOMER. EVERY EVAPORATOR MANUFACTURED IS CONTROLLED BY UNILAB LICENSE PROGRAM FOR CAPACITY AND PRESSURE DROPS AND TRANSMITTED TO THE CUSTOMER. EVS - SINGLE CIRCUIT EVAPORATOR EVD - DOUBLE CIRCUIT EVAPORATOR

Made by removing 60 per cent of water from fresh milk, our evaporated milk is thick, creamy and a popular substitute for cream in desserts.

Full cream evaporated milk made from fresh cow milk

DANA Evaporated Milk is produced from fresh cow milk. We remove over half the water content of fresh milk through a heating process and then seal and preserve the product in 410 gr tins for a long lasting shelf-life. Our Evaporated milk is an unsweetened condensed milk. You would only need only to add water in the right amount to restore the product into regular milk. DANA Evaporated milk is a perfect additive for coffee and tea. Dana Evaporated Milk is favored in many countries including countries in the North Africa, Middle East as well as Latin America. Dana Evaporated Milk is a premium product that looks great on all supermarket shelves. The gross weight is 410 grams and the milk color is light cream with the light drab tone. It is packed in 410gr easy open tins. There are 48 tins in a carton. Product's fat content is 7.5% and Protein content 6%. Its shelf life is 12 months.

The falling film principle requires an even distribution of the feed liquid. To achieve this distrubution one or more distribution trays are located in the top head of the evaporator over the complete tube sheet. Our proven distribution system makes sure that the inner surface of each individual tube is properly wetted. The liquid film moves down the tubes by gravity force. Heat applied through the tube wall effects boiling-off the light fraction from the film. The picture shows a co-current operating evaporator with vapour and liquid leaving the bottom of the evaporator into the separator vessel.

Short path distillation is a thermal separation technology operating at process pressures in the range of 1 to 0,001 mbar. It lowers the boiling temperature and is an excellent method for gentle thermal treatment of heat sensitive, high boiling products. The short path evaporator consist basically of a cylindrical body with a heating jacket, a rotor and an internal condenser. The rotor creates a mechanically agitated, thin product film on the heating surface inside of the body. By means of gravity the product flows down in a spiral path, whereby the volatile portion of the product evaporates. The vapour passes by the shortest route and with practically no pressure drop to the internal condenser. The non-volatile portion reaches the lower part of the evaporator and is discharged through the bottom product outlet. The residual vapours and inert gases flow through the vacuum nozzle to the vacuum system.

The SMS thin film evaporator type HYVAP serves the increasing demand of the pharmaceutical industry for continuous concentration of heat sensitive, viscous and fouling products. Hygienic design for the pharmaceutical industry The HYVAP is a horizontal thin film evaporator that allows easy access and inspection of the interior and controlled and reliable CIP cleaning. The technology of the HYVAP combines the proven advantages of our conventional horizontal thin film evaporators DKH with the following new features: • Cantilever rotor design • Comfortable rotor extraction • No bearing in product space • Mechanical seal in hygienic design • Electro-polished surfaces • Sight glasses for inspection during operation The new HYVAP DZH offers the hygienic design that meets current GMP requirements. The evaporator sizes range from 0.1 m2 for laboratory to 2.0 m2 for industrial applications. LP steam as well as hot water can be applied as heating media.

For fast determination of thermally-dependent interruptions in electrical circuits or components Avoidance of heat damage when soldering electrical components For heat protection of neighbouring components Shrinking of inner parts for removal of seized taper plugs, pins, plugs or bearing bushes Generation of shrink seats for assembly of inner parts For rapid temperature adjustment during materials testing For simulation of cold-starting conditions with motor-vehicle automatic starting systems Advantages and benefits Highly effective due to outstanding undercooling effect Excellently suited for simple cooling of parts Immediate cooling of smaller surfaces or parts down to –45°C depending on spraying duration Evaporates very quickly without residues Also provides good cleaning effect No negative affects on plastics and insulating materials

This chiller is unique on the global market due to its space saving L-form. The additional space required on the laboratory table is zero! Abracadabra: placed on rotary evaporator the RotaCool virtually disappears completely. The RotaCool is a product to provide a dedicated cooling service to all small bench top Rotary Evaporators. Solution for cooling of rotary evaporators Compact, space-saving design Additional extension plate Ideal for conventional rotary evaporators Robust stainless steel construction Easy operation with only three keys LED temperature display

stainless steel*flat form

You state your requirements and send us the material properties. KASAG then configures the thermal and hydraulic calculations for the desired heat exchanger. The realization is implemented according to the available drawings or on the basis of a comprehensive engineering. KASAG offers all processes necessary for that, such as the orbital-welding process for manufacturing heat exchangers. With KASAG, you can be sustainably flexible.

stainless steel*high shape

-40 °C Highest power evaporator to meet the high cooling capacities required in shock chambers. The only evaporator you will need in shock chambers with its large condensers with a fan diameter of 630mm.

Solutions for Water & Wastewater Treatment For over 30 years, Evaled evaporators and crystallizers have provided wastewater treatment solutions throughout the world. Evaled Heat Pumps, Crystallizers, and Mechanical Vapor Recompression (MVR) units offer clean technology for a wide range of industrial applications, including: Exhausted Oily Emulsions – Degreasing Baths Parts rinsing water – Phosphate coating baths Reverse Osmosis concentrates – Mixed stream wastewater Matching the application and material is critical to reduce corrosion and protect your investment. Evaled technology offers the highest quality products and material selection, with fit for purpose materials AISI 316 Stainless Steel, Super Duplex Stainless Steel and Nickel Alloy

AD SMALL PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD SMALL PREMIUM evaporative air conditioners, develop an air flow from 5,760 m3/h to 17,145 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 67m2 to 255m2

The cooler is made of stainless steel and the evaporator housing is insulated from PE and PUR. Exchangers and piping are coated against corrosion. The cooler is suitable for outdoor installation.

Portable evaporative cooler 10,080 m3/h with 16-speed - ECO FRESC The ECO FRESC portable evaporative coolers are ideal for cooling in a completely natural way and with low local energy consumption of up to 150 m2. To cool the air, evaporative cooling technology is used, which consists of passing the outside air through panels moistened with water. As the air passes through this area, it cools and increases its humidity. The treated air is driven by a fan inside the room and by renewing the indoor air comfort temperatures are reached. The necessary electrical power is 80% less than traditional air conditioning systems and by using water as a cooling element it avoids the emission of harmful gases into the environment. The ECO FRESC evaporative air conditioners have a 16-speed axial fan to adjust the necessary air flow at all times, they also have an electronic control in charge of performing all the equipment′s functions.

AD BIGGER PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. The AD BIGGER PREMIUM evaporative air conditioners, develop an air flow from 46,922 m3/h to 60,644 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 750m2 to 1,100m2. For larger surfaces more units can be installed.

AD BIG PREMIUM evaporative air conditioners for evaporative air conditioning in industrial, commercial, agricultural or livestock premises Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity. Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people. AD BIG PREMIUM evaporative air conditioners, develop an air flow from 18,140 m3/h to 36,678 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 300m2 to 615m2. For larger surfaces more units can be installed.