Documents processed - Import export

The Thermalert TX infrared temperature sensors are available with remote addressability, easily installed in multidrop configurations. TX Series Smart Sensors communicate over a simple loop-powered 2-wire cable using the HART (Highway Addressable Remote Transducer) protocol. This signal combines industry-standard 4-20 mA output with simultaneous digital communications. They include Raytek DataTemp® Multidrop software, providing an easy-to-use interface for configuration and monitoring. Temperatures can be archived or exported to other applications for analysis and process documentation. Smart TX sensors feature remotely adjustable temperature and output subranges, adjustable emissivity, ambient temperature check, and a user-defined alarm output. Averaging and Advanced Peak/Valley Hold algorithms are provided for accurate measurement of complex discrete processes.

Special features of the Lipp welding technology are the automated on site construction of above the ground cylindrical tanks made of various grades of duplex steel, stainless steel and black steel. Moreover, the technology also incorporates the post treatment of the weld and a visualized welding monitoring and the technical documentation of the process. Due to the flexible and mobile concept of the equipment, the installation can either be done on greenfield construction sites but also inside buildings or in places with limited access and working space.

The Datapaq® Food Tracker® temperature profiling systems are comprised of a data logger, protective thermal barrier and Insight software. With a Datapaq system, you can guarantee the quality and safety of your cooked meats, poultry, bakery products and ready-to-eat meals. Datapaq systems, designed to withstand the harshest environments, travel through the oven or freezer with the food product, making a complete record of product temperatures. You can monitor the product temperature of the entire cook/freeze cycle in either static or conveyorized ovens, as well as in steam cookers, deep fat fryers and blast freezers. For detailed information and system specifications, download the Food Tracker System brochure. Food Tracker Insight Software Use Insight software to convert raw data into meaningful information about your process, including instant reports on lethality. Document your process for increasing productivity, as well as formal documentation, such as HACCP. Features include

FireFox® 2 C – With setting process monitoring This tool is based on the proven TAURUS® C model. Here the setting process is analysed via integrated electronics using stroke and force sensors. The user can defi ne an OK window by means of a special software. A coloured LED on the tool shows the results of the setting process monitoring which can also be recorded and processed via data line. Apllications In the serial production of safety component parts as well as in automated setting processes the FireFox® C allows checking and documentation of the setting process. Advantages • High process safety • Documentation of each individual setting process • Less scrap since errors can be immediately identifi ed

Working range: Blind rivets up to Ø6.4 mm of all materials /except high strength blind rivets) and BULB-TITE® blind rivets up to Ø7.7 mm of all materials. (max. mandrel Ø 4.3 mm). Technical data: • Radio connection: WiFi 2.4/5.0 GHz and Bluetooth • setting force: 15.000 N • Weight: approx. 2.5 kg incl. battery (2.0 Ah) • Drive: Brushless motor (BLDC) • Device stroke: 25 mm Scope of delivery: • Mouthpieces: 17/32, 17/36, 17/40 and 17/45 Customer benefits: • Safe process due to setting process monitoring • Force/displacement diagram • Optionally up to 3 evaluation windows (WinTech) • Optional pressure monitoring possible • Complete documentation of the process (database) • Status and errors available in the network for maintenance purposes • Quality control takes place during production • Brushless motor, therefore extremely fast and almost wear-free • Flexible use

Programming is completely done in-house according to DIN EN 61131-3. The preferred programming languages used are either Siemens’ Step 7 or 3S’ CodeSys. The hardware depends on the application: it ranges from miniature control systems to computer solutions with connections to the office world in order to document the manufacturing process ideally. By working closely together with our customers we attain individual use of technological possibilities.

At OKSEL, we specialize in comprehensive industrial 3D scanning services, ensuring precise and efficient capture of complex geometries and surfaces. Our goal is to enhance accuracy and streamline your production processes. Industrial 3D Scanning Our comprehensive service includes: Detailed Planning: We begin with a thorough assessment and planning phase to understand your unique requirements and develop a customized 3D scanning strategy. This involves site visits, detailed project timelines, and coordination with your team to ensure a seamless process. Expert Scanning: Our skilled technicians utilize advanced 3D scanning technology to capture detailed and accurate measurements of your industrial components. We ensure each scan is precise and thoroughly documented for further processing.

The mains-driven panel meter RM-32 provides a continuous and precise measurement of irradiance with preamplified UV sensors. The integrated electronics produce a signal voltage that is transmitted to the radiometer, so that inferences are minimized. Different UV and visible spectral ranges, measuring ranges, and output signals can be selected to match the measurement task. The current irradiance is shown on a 3.5-digit digital display. The lamp state with respect to two threshold values is indicated by LEDs. Two relay contacts can be used for switching warning and failure signals. With its optional USB, RS232 or RS485 interface the RM-32 can be used to monitor ultraviolet (UV) irradiance. Control of light sources and irradiation systems Precise measurement of irradiances UV monitor for process control and documentation

Highly accurate measurement results require static scans from multiple angles, whereas mobile solutions focus on efficiency. The Z+F FlexScan® platform developed by Zoller + Fröhlich combines the advantages of static scans with the efficiency of mobile systems. The perfect complement for any time-sensitive or large-scale application: AEC, facilitiy management, process industries, heritage documentation and forensics. + Universal mounting The Z+F FlexScan® 22 is highly versatile and can be easily used with various support systems. This SLAM platform can be attached to backpacks, tripod carts, fixed tripods, and robots. Thanks to the Quick Mount System, switching between support systems can be done in just a few minutes. Furthermore, data captured with different support systems can be effortlessly registered in Z+F LaserControl®.

We make unique pieces or series on CNC milling machine in 3 axis Okuma brand. The processed materials are steel, cast iron, aluminum, stainless steel, titanium

The sterilization documentation system is used for patientrelated traceability of all medical sterilization processes. The documentation page contains all the necessary information to release the sterilization batch. One sterilizer and one documentation sheet for the day are used. Using a labeling device (Label Gun), the documentation sheet and each package can be labeled with a selfadhesive label containing the following information • Production and expiry date, •Person in charge, • The contents of the packaging, • Sterilizer and batch number. All packages on the lot and documentation pages have the same label content and lot number. After opening the sterile package in the OR, the top layer of the label can be peeled off and affixed to patient and/or operative documentation. The content of the label allows for followup on the patient's return to batchrelated documentation in the sterilization department.

Discover the easy handling of our Pressure Transmitter and Reader of the PT-RF series. The PT-RF series of pressure transmitters are an alternative solution for universal pressure measurements for fluid technology applications, which will provide benefits for system operators, maintenance personnel and repair technicians as well as for original equipment manufacturers. The advantages resulting from the use of the new technology for system operators, maintenance personnel and repair technicians are clear: Measurements can be carried very easily, without extensive training and within a few seconds at the press of a button and then documented in a reliable process. Unscrewing and re-installing pressure gauges or other measuring and display devices – practically a temporary opening of the system – is not required. Potential hazards for people, machines and the environment, for example from emitted residual oil in the test hose or leaks at the measuring point, as well as ingress of...

Test systems and inspection systems form an integral part of most of the automated solutions we employ. Each assembly process is usually followed by an inspection process so that the highest quality requirements can be satisfied. Both laboratory as well as stand alone or inline series inspection systems (EOL) have already been widely implemented by ruhlamat. Inspection results (product/process data) are documented in individual or customer-specific databases (traceability). Seamless traceability of product and process data Inline process control and monitoring Efficiency through timely trend control 100% inspection

Top security for your processes Quality is no accident. Benefit from the highest process reliability, from the idea to the development to the finished product. More than 14 years of experience, intensive know-how in the field of gas filling and qualified employees are the basis for successful applications. As a team we work to inspire you - with competence, reliability and quality. Quality management with latest technology A continuous quality management documents all processes: Your orders are managed by the ERP-system, Microsoft AX, all quality-related data will be stored in Share Point libraries for secure storage, evaluation and documentation. Almost the entire quality management is IT based. Interfaces to proprietary software developments allow external connections to quality-related data - the highest transparency for you and your processes. Documented Reliable batch traceability: consistently, from the source to the bottle. Our currently unique cylinder database saves all impor

The WARP 8 is an inline pipe measuring system for wall thickness and diameter measurement at 8 points or 4 axes. It provides all important measurement data required for manual or automated process optimization and control. In addition to the short return-of-invest time, the system offers high measurement accuracy as well as process automation and documentation functions. The static sensors allow a high resolution of the measured values in the extrusion direction. Thus, process fluctuations are precisely recorded and visible, so that effects such as short-term fluctuations in output or backpressure effects during the sawing process can be detected and eliminated. Other advantages/features: — Diameter range from 60 to 1200 mm (five sizes) — Wall thickness range from 2 up to 250 mm (depending on material) — Short ROI period — Ideal for process optimization

Phosphorus is the decisive factor for excessive algae and plant growth in water bodies, that's why continuous monitoring of this parameter is essential. The Liquiline System TP analyzer offers precise online measurement of total phosphorus and ensures highest process safety. Automatic calibration and cleaning save you operating costs while advanced diagnostics with remote access support you in providing process documentation to the authorities.

Liquiline System CA80PH offers online orthophosphate measurement for precise dosing of precipitants in wastewater treatment. As all Liquiline System analyzers, it enables plug & play of up to 4 Memosens sensors - minimizing the installation effort. Automatic calibration and cleaning and the low consumption of reagents save you operating costs. Advanced diagnostics with remote access ensure process safety and support you in providing process documentation to the authorities.

Our isothermal forging presses produce sophisticated, heavy-duty components for high-tech products. We furnish our customers with rst-class solutions including control systems for the ne-tuning of pressing speeds. Our presses are designed for high-precision applications indispensable in the aircraft/aerospace and medical engineering industries. The challenge here is to manage pressing speeds of 0.01 mm/s in controlled operation, which is ensured by our own electrical and hydraulic control engineering Siempelkamp also oers plants to be used for isothermal forging. They comprise the furnace, the feed manipulator, the forging press, the die heater, the hydraulic drive system and the entire automation technology. The plant control for isothermal forging presses monitors and documents the process parameters in compliance with the certication standards to be observed in the aircraft industry.

Liquiline System CA80COD offers constant online measurement of the chemical oxygen demand (COD). It supports you in monitoring the cleaning capacity of wastewater treatment plants and enables load-based billing for industrial dischargers. Automatic calibration and cleaning save operating costs while advanced diagnostics with remote access help to provide process documentation to authorities. The COD analyzer's software-controlled safety functions ensure the highest level of occupational safety.

It is our standard to realise each and every job with absolute perfection. For this reason, we perform a final quality check. Even in the case of regularly recurring orders, the correct standard is of course always retested. Each order includes the necessary accompanying documents along with the cylinder. These documents detail the individual processing steps and important operations. On request we will provide you a log of the work performed. The quality check entails the following steps: Inspection of the embossing using a sample from the cylinder Determination of the profile depth: Depth of the grid and the width of the web are measured with the latest technology. Final inspection of the cylinder for true-running and intact surface Proof: Print result of the cylinder is inspected on the proof press.

Engineering services and consultation After receiving the design and process-engineering documents, Hilgefort prepares the basic and/or detailed engineering services together with all the necessary static and thermal calculations, as requested by the customer. Hilgefort has been working with various engineering firms for many years and to great success. When it comes to designing pressure vessels and steam boilers or plant components for scheduled working cycles and downtimes, Hilgefort GmbH possesses extensive experience. In addition, Hilgefort also provides assembly planning, crane concepts, project management and welding consultations. With this combination, Hilgefort is able to deliver turnkey projects. Planned down to the finest detail – from start to finish “Made in Germany” enjoys an excellent reputation in international plant construction – and for good reason. Considerable engineering expertise and experience in engineering and detailed engineering play a key role in...

Decrease setup time for your process. Save material. Document continuously.

Coatmaster Inline Decrease setup time for your process. Save material. Document continuously. Advanced Thermal Optics by coatmaster The coatmaster technology (ATO) allows the thickness of the coating to be measured immediately after application. The technology operates contactless and non-destructive without dangerous emissions and is suitable for coating metal, paper, rubber, ceramics, glass, plastic and wood surfaces.