Results for
BDA CONNECTIVITY GMBH
Germany
A complete portfolio includes all available connector types: N, DIN and 4.3-10 combines with various power rating and PIM values, power splitters by bda connectivity offer solutions to different scenarios and include extended frequency range up to 3.8GHz for future 5G application.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
With its rugged housing and a stainless steel sensor element, the transducer is particularly robust and ideally suited to the harshest environments. This also means that the sensor can be installed anywhere with no effect on the measurement signal. The built-in instrumentation amplifier converts the sensor signals into noise-immune voltage signals or current signals that can be transmitted over relatively long distances. For high viscose materials, a front-level membrane M12 x 1 is available, and with this disruptive dead volumes can be expelled. The sensor has a small protected hole on the rear to allow measurement of atmospheric pressure (measurement type relative). For the absolute measurement option, the applied pressure is measured with respect to an enclosed vacuum. As an electrical connection, a DIN 43650A valve connector or an M12 x 1, 4-pin connection is available.
Request for a quoteROTH ELEKTRONIK GMBH
Germany
Epoxy fibre-glass FR4 1.50 mm Single-sided 35 µm Cu Hot air leveling (HAL-leadfree) Hole spacing 2.50 x 2.50 mm 37 x 58 soldering pads 2.20 mm Ø Hole diameter 1.00 mm Connector 31-channel DIN 41617 Size 100 x 160 mm
Request for a quoteROTH ELEKTRONIK GMBH
Germany
SRBP-paper FR2 1.50 mm Single-sided 35 µm Cu Organic soldering protection (OSP) Hole spacing 2.50 x 2.50 mm 37 x 58 soldering pads 2.20 mm Ø Hole diameter 1.00 mm Connector 31-channel DIN 41617 Size 100 x 160 mm
Request for a quoteFATH GMBH
Germany
Milling connector set ; for quick and stable connection of two aluminium profiles without profile machining. different sizes: — Profile 30, 40, 45 — profile groove 8 or 10 material: — Steel, zinc plated Set contents: 1 milling connector 1 screw DIN 912 1 hammer nut
Request for a quoteCAMILLE BAUER METRAWATT AG
Switzerland
• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Minimal range: 50 °C • Accuracy 0.1%
Request for a quoteCAMILLE BAUER METRAWATT AG
Switzerland
• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Accuracy 0.1%
Request for a quoteCAMILLE BAUER METRAWATT AG
Switzerland
• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Accuracy 0.1%
Request for a quoteCAMILLE BAUER METRAWATT AG
Switzerland
• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Accuracy 0.1% • With power supply for 2-wire transmitter
Request for a quoteCAMILLE BAUER METRAWATT AG
Switzerland
• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Small dimensions • Accuracy 0.1%
Request for a quoteCAMILLE BAUER METRAWATT AG
Switzerland
• Bridging power supply through the DIN rail bus connector (CB-Power-Bus) • Redundant power supply • Built-in over-voltage (surge) protection • Supply of up to 75 modules • Two individual power supply sources can be connected to one SINEAX VS70 module • Spring cage clamp connection
Request for a quoteONAIR MEDYA LTD
Turkey
Specifications Mechanical properties Connectors DIN 7/16 or 7/8 " Overall Dimensions [Wxdxy] [mm.] 254x509x800 Weight [kg.] 22 Temperature range [° c] -10 ÷ + 50 Electrical properties Frequency range [MHz] 87.5 ÷ 108 Maximum input power [w] 2000 Insertion loss [dB] @ fo Insertion loss [dB] @ fo ± 150kHz Selectivity [dB] @ fo ± 2mhz> 24 Return loss [dB] ≥ 26 Input / output impedance 50 Ohm
Request for a quoteCLIPPARD EUROPE SA
Belgium
Now Available Normally-Open or Normally-Closed! Clippard's EGV Series valves are an electronically piloted version of the GV series valves, ideal for large flow, low leak applications. Available in 1/8" NPT ported and manifold mount, they utilize Clippard 10 mm or 15 mm valves, and offer numerous voltage and connection options. These 2-way and 3-way valves provide 10 times more flow than Clippard's MAV series, and 2.5 times more flow than the MJV series! An externally piloted option is available for controlling lower pressures and other media. Features: • Available Normally-Open or Normally-Closed • Small, compact size, lightweight with high flow • Large variety of control voltages and connections • Electroless nickel plated brass and anodized aluminum construction for long life and corrosion resistance • Proven poppet design Medium: Compatible Gases Input Pressure: 20 to 110 psig* (150 psig max with Air Pilot or DIN Connector) Air Flow: 30 scfm @ 50 psig; 53 scfm @ 100...
Request for a quoteTAKA AMORTISOR VE YEDEK PARCA SAN. TIC. LTD. STI.
Turkey
Clevises produced according to customer request.
Request for a quoteCABLES AND SENSORS
Netherlands
Technical Specifications Distal Connector: Din-Style Lead Cable Color: Gray Lead Cable Diameter: 4 mm Lead Cable Material: PVC Jacket Lead Color Coding: IEC Cable Length: 90 cm Lead Cable Length Limb: 90 cm Lead Cable Length V: 90 cm Lead Number: 5 Proximal Connector: Adhesive Electrode - Neonate
Request for a quoteELACTIS SA
Switzerland
DIN43650 TYPE A connector for solenoid valves and electromagnets. Features up to 90% power reduction, regulated current, detecting plunger movement, protection against surge currents, etc... Ideal for pneumatic, process and hydraulic valves. Custom set parameters for best efficiency. Can be used to enhance battery life, increase switching speed, allow higher pressure or flow ratings
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Din connector - Import exportNumber of results
17 ProductsCompany type