Din connector - Import export

Adjustable Clicker Wrench with Rectangular Insert and Metal Handle. Robust clicker wrench for tightening various types of bolts on production lines or in service applications. For use with interchangeable heads with rectangular ('DIN') connector. Torque adjustment is easily adjusted by rotary knob and scale. A distinct 'click' sound signals the completion of tightening upon reaching the set torque. Key Features: Repeatability according to DIN EN ISO 6789 type II class A For interchangeable attachments with elongated corner mount ('DIN') Torque adjustment by means of rotary knob and scale Robust knurled metal handle

Preset Clicker Torque Wrench with "DIN style" rectangle insert The strong dimensioned torque spring is the very heart of this clicker wrench. With reaching the pre-set torque, the torque spring is squeezed slightly, and the hardwearing pawl is releasing the tool tang. An excellent tactile and audible impulse signals that the pre-set torque is achieved. The torque is preset and locked in with a special tool, and tamper-resistant/tamper-evident seals can be installed. Torque can be set using any torque tester or calibration device providing ± 1% accuracy or better. Key Features: - Accuracy ± 4% i.v. (within 20-100% of capacity) - Meets or exceeds ASME B107.300-2010 and EN ISO 6789 - Rectangle connector (DIN) 9×12 mm rsp. 14×18 mm - Thick-walled housing profile provides high durability - Torque adjustment via optional C.A.R.T. (p/n 819117) - Oil and chemicals resisting vinyl handle for optimal hand position. - Can be ordered preset from factory.

With its rugged housing and a stainless steel sensor element, the transducer is particularly robust and ideally suited to the harshest environments. This also means that the sensor can be installed anywhere with no effect on the measurement signal. The built-in instrumentation amplifier converts the sensor signals into noise-immune voltage signals or current signals that can be transmitted over relatively long distances. For high viscose materials, a front-level membrane M12 x 1 is available, and with this disruptive dead volumes can be expelled. The sensor has a small protected hole on the rear to allow measurement of atmospheric pressure (measurement type relative). For the absolute measurement option, the applied pressure is measured with respect to an enclosed vacuum. As an electrical connection, a DIN 43650A valve connector or an M12 x 1, 4-pin connection is available.

Epoxy fibre-glass FR4 1.50 mm Single-sided 35 µm Cu Hot air leveling (HAL-leadfree) Hole spacing 2.50 x 2.50 mm 37 x 58 soldering pads 2.20 mm Ø Hole diameter 1.00 mm Connector 31-channel DIN 41617 Size 100 x 160 mm

SRBP-paper FR2 1.50 mm Single-sided 35 µm Cu Organic soldering protection (OSP) Hole spacing 2.50 x 2.50 mm 37 x 58 soldering pads 2.20 mm Ø Hole diameter 1.00 mm Connector 31-channel DIN 41617 Size 100 x 160 mm

A complete portfolio includes all available connector types: N, DIN and 4.3-10 combines with various power rating and PIM values, power splitters by bda connectivity offer solutions to different scenarios and include extended frequency range up to 3.8GHz for future 5G application.

Milling connector set ; for quick and stable connection of two aluminium profiles without profile machining. different sizes: — Profile 30, 40, 45 — profile groove 8 or 10 material: — Steel, zinc plated Set contents: 1 milling connector 1 screw DIN 912 1 hammer nut

• Available with silver or gold contacts, die cast nickel, black or plastic shells and including non-latching versions • Suitable applications include: • Sound and video mixers • Microphones • Studio equipment (Amplifiers, Professional CD players, Mixing desks, etc) • Active loudspeakers • Industrial applications like control circuits • There is also a universal range of connectors which are available in non-latching versions for users who prefer the slightly faster disconnection that this type of connector allows.

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• A range of coloured ring locks and identification rings. • Select from a pack of twenty mixed colours or a single ring lock in blue, blue or white.

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• Fully screened and robust DIN connectors for use in instrumentation and audio applications. • Suitable applications include: • Recording equipment • Test instrumentation • Medical instrumentation • Business equipment

• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Accuracy 0.1%

• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Small dimensions • Accuracy 0.1%

• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Accuracy 0.1%

• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Minimal range: 50 °C • Accuracy 0.1%

• 3-way galvanic isolation • Spring-cage clamp connection • Power bridging terminal DIN rail bus connector • Compact design, width only 6.2mm • Accuracy 0.1% • With power supply for 2-wire transmitter

• Bridging power supply through the DIN rail bus connector (CB-Power-Bus) • Redundant power supply • Built-in over-voltage (surge) protection • Supply of up to 75 modules • Two individual power supply sources can be connected to one SINEAX VS70 module • Spring cage clamp connection

Specifications Mechanical properties Connectors DIN 7/16 or 7/8 " Overall Dimensions [Wxdxy] [mm.] 254x509x800 Weight [kg.] 22 Temperature range [° c] -10 ÷ + 50 Electrical properties Frequency range [MHz] 87.5 ÷ 108 Maximum input power [w] 2000 Insertion loss [dB] @ fo Insertion loss [dB] @ fo ± 150kHz Selectivity [dB] @ fo ± 2mhz> 24 Return loss [dB] ≥ 26 Input / output impedance 50 Ohm

Now Available Normally-Open or Normally-Closed! Clippard's EGV Series valves are an electronically piloted version of the GV series valves, ideal for large flow, low leak applications. Available in 1/8" NPT ported and manifold mount, they utilize Clippard 10 mm or 15 mm valves, and offer numerous voltage and connection options. These 2-way and 3-way valves provide 10 times more flow than Clippard's MAV series, and 2.5 times more flow than the MJV series! An externally piloted option is available for controlling lower pressures and other media. Features: • Available Normally-Open or Normally-Closed • Small, compact size, lightweight with high flow • Large variety of control voltages and connections • Electroless nickel plated brass and anodized aluminum construction for long life and corrosion resistance • Proven poppet design Medium: Compatible Gases Input Pressure: 20 to 110 psig* (150 psig max with Air Pilot or DIN Connector) Air Flow: 30 scfm @ 50 psig; 53 scfm @ 100...

Clevises produced according to customer request.

Technical Specifications Distal Connector: Din-Style Lead Cable Color: Gray Lead Cable Diameter: 4 mm Lead Cable Material: PVC Jacket Lead Color Coding: IEC Cable Length: 90 cm Lead Cable Length Limb: 90 cm Lead Cable Length V: 90 cm Lead Number: 5 Proximal Connector: Adhesive Electrode - Neonate

DIN43650 TYPE A connector for solenoid valves and electromagnets. Features up to 90% power reduction, regulated current, detecting plunger movement, protection against surge currents, etc... Ideal for pneumatic, process and hydraulic valves. Custom set parameters for best efficiency. Can be used to enhance battery life, increase switching speed, allow higher pressure or flow ratings