Digital measuring equipment - Import export

specimen stage with analog micrometer spindles (25 x 25 mm) hand driven focussing axis electronic measuring eyepiece

Universal centring microscope to set up tool machines (for example drilling and milling machines).

The DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was developed for level measurement in waste water, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outside-diameter is only 22 mm for easy installation and back fitting in 1″ tubes or in cramped fitting conditions Features — Nominal pressure from 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0.35% (opt. 0.35 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 22 mm — highly appropriated for sewage water Optional features — drinking water certificate according to DVGW and KTW

The stainless steel probe DCL 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data are transferred in binary form. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. Features — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0.25 % FSO — output signal: RS485 with Modbus RTU protocol — diameter diameter 26.5 mm — small thermal effect small thermal effect — high accuracy excellent accuracy — reset function Optional Features — drinking water certificate according to DVGW and KTW — different kinds of cables — different kinds of seal materials

The DCT 533P is suitable for food / beverage and pharmaceutical industry as well as, for applications where a totally flush pressure port is required. The special design prevents condensation inside the pressure transmitter and thus a failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Properties can be read and qualified via IO-Link, which helps the user to assess the state of system or process. Features: — nom. pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygenic version — CIP / SIP cleaning up to 150 °C — ingress protection Ip 67 / IP 69 — diaphragm with low surface roughness Optional Features: — cooling element for media temp. up to 300 °C — different process connections

The stainless steel probe DCL 551 with RS485 in-terface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data are transferred in binary form. DCL 551 has been designed for hydrostatic level measurement in sewage as well as for viscous and pasty media. Basic element is a robust and high overpressure capable capacitive ceramic sensor. Features — Nominal pressure: from 0 ... 40 cmH2O up to 0 ... 200 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 39.5 mm — excellent long term stability — especially for sewage, viscous and pasty media Optional features: — diaphragm ceramics Al2O3 99,9%

KHM 104 BAHO Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 104 BAHO (BUILDING MATERIALS / WOOD) as in the PROFESSIONAL carrying case S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, hollow hammer electrode with steel pins, ready to operate with measuring tables for wood and building materials, 100 mm brush probe, conductive paste and red building material plug.

KHM 103 EXPERT Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 103 EXPERT S91 digital moisture measuring unit with automatic temperature compensation (ATC) and M100B precision space and temperature measuring unit, batteries, measuring cable, temperature hand sensor, shock electrode with steel pins, brush probe, special board sensor, conductive paste, building material plug complete with measuring tables for wood and building materials in the carrying case.

KHM 102 PROFESSIONAL Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 102 PROFESSIONAL S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, hollow hammer electrode with steel pins, ready to operate with measuring tables for wood in the carrying case.

KHM 101 JUNIOR Smallest unit of measure: +/- 0,5 % Temperature compensation: automatic or by way of external sensor from -50 to + 95° C by way of internal sensor from 0 to 60° C Permissible surrounding temperature: 0 to 60° C Permissible surrounding humidity: 0 to 80% (non-condensing) Electricity supply: 9 V block battery (type: JEC 6F"") included in scope of supplies battery EOL indicator: automatic, “BAT” when battery is empty KHM 101 JUNIOR S91 digital moisture measuring unit with automatic temperature compensation (ATC), battery, measuring cable, temperature hand sensor, shock electrode with steel pins, ready to operate with measuring tables for wood in the carrying case.

Digital wood moisture measuring equipment We are not only specialists for wood drying, but also your partner to contact for anything related to moisture measuring technology. Our modern, innovative company combines moisture measuring technology, control technology Our digital moisture measuring equipment with temperature compensation accurately measures: Sawn timber, chipboard, veneer, sawdust, wood chips, wood shavings, concrete, aerated concrete, tiles, screed, plaster, silica sand (sand up to a maximum of 20 %), lime plaster, concrete, paper, cardboard and also textiles and drying technology into a complete coordinated offer.

When constantly monitored and accurately analysed, this data can be used to anticipate unexpected breakdowns, to schedule preventive maintenance operations, and even to identify the weak points of production facilities and continuously improve their efficiency. No more inconvenient production shutdowns. No more preventive replacement of equipment that can operate effectively until the next maintenance campaign No more excessive and unjustifiable preventive maintenance costs.

Many materials cannot be measured tactilely, therefore non-contact thickness measurements become necessary. Especially e.g. with glowing materials, or wet processes, a continuous tactile measurement is nearly impossible. Furthermore, web speeds in plant engineering and production have increased, requiring a corresponding fast sampling rate of the measuring systems. In addition, high measuring widths are often required. Why is contact free measurement technology so perfect for this application? Can be used in any web width, Scalable measurement thicknesses from a few millimetres to several meters, Thickness and coating thickness can be measured for different materials, Vibrations of the web materials, can be compensated, Turnkey solution for mechanical engineering, Non-contact and non-destructive measurement method, Large distances to the measured object are possible, Measurement of free forms,

The QuellTech laser sensor family Q4 or Q5 used for these tasks is generally mounted on an arm of a rotational axis, to scan along the complete 360° angle of the internal surface in a sequence of strips. The Q4 sensors can also be used to control the weld seam tracking itself for rapid setup and ease of use. Even during a project, the range and scope of the Q Series sensor demonstrates the advantages of a modular system to quickly adapt to project needs, where the smallest system has provided fast analysis of pipes as small as 105mm. The low power, with standard communication protocols, enable battery powered systems to transmit wireless data to other systems for review and cloud back up.

The high-performance optoNCDT ILR2250 laser distance sensor is used whenever large measuring ranges and high accuracy are required. The optoNCDT ILR2250 can be installed at distances up to 100 m, and even up to 150 m with a reflector film. This sensor impresses when measuring dark, structured and poorly reflecting surfaces, while providing stable measurement results to millimeter accuracy. The optoNCDT ILR2250 laser distance sensor is used in transportation, logistics and conveyance technologies as well as automation and the metals industry. This is where the sensor enables reliable measurement results even when it is, e.g., installed at a safe distance from heat emitting measuring objects. In addition, difficult-to-access places via mirrors or through glass sheets can be detected.

Low load hardness tester from 1 g to 2 kg Vickers or Knoop diamond indentor manual, semi- or fully-automatic

The measuring wire ist fastened to the headstock or a special holding device, fed at the end of the base over a pulley and stretched tight with a weight (layout according to DIN 8606). The alignment tester must be placed on the carriage of the machine or a corresponding device, which can be moved in a longitudinal direction in predefined steps on the machine base. The measuring wire must be aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting line parallel to these positions. When the wire is aligned to the bearing, the value display is set to zero. The straightness deviation can now be read directly on the display for each position when both parts of the image are fitted together by moving the microscope horizontally with the integrated micrometer spindle.