Devices testing - Import export

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

Devices testing hermeticity Devices testing electrical parameters Devices for geometry verification

In the whipped cream siphon test, some devices were tested and evaluated. The ideal cream spray bottle is made of stainless steel and has a filling volume of 500 ml. Besides cream, the preparation of other cold and hot dishes, espumas, whipped cream, foams, and delicious mousse variations should not be a problem. The scope of delivery should also include several attachments and a cleaning brush. Cream cartridges are also necessary for the cream siphon to function. The use of a cream dispenser is basically not difficult and always follows the same principle. The fresh whipped cream is poured into the cream dispenser and closed with the lid. Then the cream cartridge is activated via the device head. A soft hissing sound gives the green light and allows the nitrous oxide cartridge to be removed again. Now your cream whipping device is ready for use. The freshly whipped cream flows fluffily and easily from the dispenser and can be used individually.

In the Cataphoresis Laboratory, where the compliance of Cataphoresis Coated products with customer specifications is checked, there is an ETÜV Furnace, Mash Furnace, Impact Test Device, Precision Scale, Ph Control Equipment, Conductivity Control Equipment, Salt Test Device and various Chemistry Laboratory Equipment. The process is kept under control with periodic checks carried out by Expert Engineers.

Auxiliary Equipment is provided with the product.

Testing by means of mass flow method - Multi-channel applications possible - Different measuring ranges possible - Electronic pressure regulator - Completely remote controllable - Optionally remote controllable via ProfiNet

Lite version - 1-channel application only - Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, long-life version

Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design - Multi-channel applications possible

Overpressure or underpressure - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design

An idea over forty years old to be able to carry out static tests on resonance testing machines in the fastest possible work steps has been implemented with a new, innovative special version of the 100-time proven testing machine RUMUL TESTRONIC. The possibility to directly combine dynamic vibration tests with static tests is particularly attractive. The oscillation of fracture mechanics specimens and the subsequent breaking open of the specimens without having to switch to another testing machine is an efficient and economical application of this special device TPP.

Cover for a salt spray test facility The original plexiglass cover of this salt spray test system needed to be replaced by a new, much sturdier cover. This was designed and manufactured by TC on the basis of GRP profiles and GRP sheet material.

Based on its specifications, this device can be used in various applications. It is especially suitable for resistance measurement on insulating materials such as e.g. cable insulations, foils, textiles, surfaces, insulating liquids,etc. With a test voltage of 45 V, 100 V, 250 V and 500 V the device fulfi ls most test specifi cations such as e.g. DIN 51953, 53482 and 54345. The guard switching allows single resistance measurements in a triangle wiring. This could be e.g. a two line cable with common shield or the measurement of insulating materials on a guardring measurement cell. The selection of the measurement range is done manually or automatically. Fast subsequent measurements can be realized by the internal limit value indicator. When the measured value exceeds the limit the limit value indicator switches and activates a potential-free relay output. The megohmmeter RESISTOMAT® model 24508 is the right instrument for its use in laboratory as well as in industrial applications.

The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. Typical main areas of application therefore include: — When normal resistors prove to be too large scale — For test and calibration of resistance measurement devices — For tests on electrical temperature measuring equipment — For laboratory setup of a Wheatstone bridge — As shunt resistor for accurate current measurement — As part of standard equipment in research laboratories — For a large part of measurements in calibration laboratory. Features: — Range 10 μΩ ... 100 kΩ — Low capacitance and low inductance design — Suitable for direct current and technical frequencies — High stability < ± 0.01 % over years

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

Cygnus ultrasonic hatch cover weathertightness tester has been ABS type approved and accepted by P & I clubs. This ultrasonic hatch cover testing device is used to perform quick and effective evaluation of cargo hold hatch covers and door seals to determine water leaks and weathertightness. This ultrasonic leak detection system allows inspections to be carried out with cargo in place or in subzero temeprature, replacing traditional and unreliable methods such as hose testing. The Cygnus Hatch Sure system comprises of 2 parts a battery powered transmitter containing 19 ultrasound emitters (40 kHz) which are arranged to produce an omnidirectional sound field uniformly distributed throughout the cargo hold; and a receiver which displays the sound energy level that passes through gaps in the enclosed cargo hold to enable the location of leaks to be quickly and accurately identified.

One of the indispensable elements of the health field is the medical sector. Many devices, equipment, machines and test kits used in this sector have become indispensable elements in terms of quality health care. The importance of domestic entrepreneurs is very great in this sector, where we are 80% dependent on foreign sources. The fact that any investment to be made will reduce our country's dependence on foreign health in the field of health and play a major role in gaining strength in the economic and social field cannot be ignored. As AYBERKSAN Plastik Kalıp Sanayi, we know the importance of being in the medical sector and we are directing our investments in this direction. We respond to the needs of the medical sector with the production of molds and plastic injections for the needs in the pandemic period, test kits with sensitive content, and devices used in disease treatments.

DPFR-004 Customized Solution for friction measurement of transmission A hand-held enclosure with integrated torque transducer, start buttons and 1 display for torque andf speed. Is used to the friction torque of tapered roller bearing set or monitor. portable Safety circuit by two-hand operation Constant load independent test speed

Mobile test device for detection of the maximum torque (drag indicator mode) and for the detection of the power range (constant load) of motors in dental and dental surgical application area. arbitrary loading curves endurance test speed ​​measurement in aluminum case permanently installed Calibration disc and calibration will be in the trunk.

Customized Solution Component supply and emissions over hand-operated turret Application Quality assurance in the electronics industry. Batch testing; Test equipment for testing and optimization of weld two part housings of SMD components. Batch testing; Test device for checking and optimizing the welded connection on two-part housings of SMD components. Test device for small SMD parts Documentation of the maximum torque achieved and the tear-off angle. Documentation of the maximum achieved torque and angle of demolition.

Customized Solution The mobile testing device may be mounted directly on the wheel nuts on any wheel on the car. The height and tilt adjustment allows optimal orientation at the wheel. Additionally, it is still supported by three proximity sensors. The evaluation and control of the testing device accepts a laptop. For easy transport, the device can be disassembled in a few steps. Curve recording and analysis via notebook. The complete unit is height adjustable via a scissors system. This can also be adapted to different shaft height.

The process photometer ZPM measures the transmission of optical transparent materials like silica, glass, crystal, or plastics plates. The influence of ambient light is minimized by using a modulation technique. This is of special importance for the measurement of scattering samples. Yoke photometers measure at a fixed wavelength between 254 nm and 980 nm or with selectable wavelengths, for example, red (630 nm), green (520 nm), and blue (470 nm) for ZPM RGB. Our range includes more than 30 wavelengths; thus, the photometer can be optimally adapted to the application. Transmission data are steadily shown on the display. Measuring data can be read by a computer or PLC (optionally) manually or after being triggered. The device under test can be adjusted and fixed using the optional alignment table. We also manufacture individual yoke photometers for scattering samples or custom sizes. You can take advantage of the modular base unit and our in-house CAD-CAM production.

Test HIV 1.2 – Product code: 90-1015 The Insti Hiv Test for self-diagnostic use is a single-use, vertical scrolling, qualitative immunoassay for the detection of antibodies to Human Immunodeficiency Virus Type 1 (HIV-1) and Type 2 (HIV-2) in whole blood from lancing device. Insti Hiv Test for self-diagnostic use is intended to be used as a test to aid in the diagnosis of HIV-1 and HIV-2 infection using a small drop of blood (50μL) obtained by finger prick. Extensive research studies have shown that this test is extremely accurate when done correctly. It has a proven sensitivity (measure of reliability that the test will be positive for those with HIV infection) of 99.8%. The INSTI HIV-1 / HIV-2 Antibody Test is a qualitative, fast-scrolling, single-use in vitro test for the detection of Human Immunodeficiency Virus Type 1 and Type 2 antibodies on human whole blood collected in EDTA, blood from finger pricker, serum or EDTA plasma.

FIV Antibody + FeLV Antigen Combo (Whole Blood/Serum/Plasma) is a combined rapid cassette test, capable of separately diagnosing the presence of Feline Immunodeficiency Antibody and Feline Leukemia Virus Antigen in Feline Whole Blood, serum or plasma. FIV Antibody + FeLV Antigen Combo is a lateral flow immunochromatographic rapid cassette test using the direct (or Sandwich) method. The device has two test windows. Each test window has an invisible T (test) zone and C (control) zone. When the sample is applied to the wells (S) on the cassette, the liquid flows sideways on the surface of the test strip. If there is a sufficient amount of Feline immunodeficiency antibody or Feline leukemia virus antigen in the sample, a visible T line will be displayed in the corresponding test window. Line C should always appear after applying a sample, thus indicating that the result is valid.

Friction measurement on gear with cam recording with service case In order to reduce the frictional torque in a gearbox from the automotive industry, a measuring device that accompanies the development is required. With the DPFR-027, changes in the design can be measured directly on the product. This means that even the smallest improvements can be determined. The field of application of this test device is extremely diverse and can be easily converted to other applications. Thanks to the mobile design, tests can be carried out under different temperatures and climatic conditions. hand-held drive unit compact slim design constant load-independent test speed selectable direction of rotation and speed additional storage to eliminate lateral forces Acquisition of torque and angle of rotation Graphic recording of the test sequence Storage of the test results in Excel

System 3000 reliably protects stone crushers, waste compactors, mills and other processing plant which could be damaged by larger metal parts. The MDV/MU analysis devices of system 3000 feature, dependent on the variant,m a comfortable installation and set-up using automatic calibration, self-monitoring, reset function, pre-attenuation indication, sensitivity potentiometer and test function. Optionally, devices with multiple functions are available in the miniature control cabinet as well as robust water-tight variants for outdoor use. To increase sensitivity or range, it is also possible to connect several coils to an analysis device.

Computercontrolled (CNC) test bar milling machine with installed machining programs and special clamping devices will prepare samples for tensile tests and other specific shaped sample required tests The CNC milling machine is a tabletop unit with protective doors. Preconfigured machining programs for all common sample shapes The allround enclosure ensures safety at the workstation The milling machine is optionally fitted with pneumatic clamping devices Test samples with a maximum length of 250 mm, a maximum thickness of 50 mm can be milled as standard. Optionally thickness of 100 mm is available. Delivered with workbench Test samples milled in accordance with standard dimensions Machined areas cooling with compressed air Highquality unit components guarantee long service time