Cylinder gas - Import export

The user-friendly carbon dioxide disposable cylinder is the perfect accessory for creating food or carbonated drinks. The carbon dioxide cylinder consists of either 600, 1250 or 2200 grams of carbon dioxide. The carbon dioxide cylinder makes use of high-quality European carbon dioxide, The cylinder can be used in combination with a pressure regulator to assure using the right amount of carbon dioxide. Adheres to the European rules and regulations Disposable cylinders made from stainless steel Improved cylinders guaranteeing full capacity

aluminium,*powdercoated*for gas cylinders*up to 230 mm Ø*safety belt*with snap buckle*Cross holes 6,5 mm*for wall fixing*for benches up to 65 mm

Ideal for safely storing gas tanks. Welding system certified UNI EN ISO 3834-2. The tank is equipped with: Hinged door with anti-intrusion closure Galvanised roof Tanks inner hooking in chequer plate steel Modular structure Ramp access in sheet metal Safety labelling

A whipped cream dispenser is an aluminum or tempered steel dispenser, which depends on either 8gram gas cylinders, or the larger 580 gram, or 640 gram cylinders to compress the canister to immediately break up the gas into the fluids. Once at the point where the cream dispenser’s valve is opened by squeezing the switch the fluid is constrained out of the spout by the high pressing factor, increasing the air pockets in a split second to change the fluid into, for example, whipped cream. To make whipped cream you should utilize a thickening (whipping) cream. This cream has an ideal fat substance between 2736%. While charging the N20 cream charger into the canister the N20 breaks down into the fat. At the point when the switch is squeezed, it delivers the compel making the nitrous oxide extend inside the fat particle, which when combined leads to the creation of the whipped cream.

igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm Most important features: Very low weight High tensile forces Combinable with rod end bearings of the dimensional series E vibration dampening Noise dampening Available for left-hand and right-hand threads igubal® clevis joints are solid polymer made of igumid G according to DIN 71752, which can be combined with the rod end bearings of the dimensional series E as counterpiece. They consist of clevis joint, pin and circlip, or alternatively with spring loaded pin. igubal® spherical bearings application examples When to use it? When high stiffening is required When freedom from corrosion is desired When lubrication should not be used When you want to save weight When maintenance-free dry operation is desired When the easiest installation should be implemented When combinations with pneumatic cylinders and gas struts should be implemented When not to use? When temperatures above +200°C prevail When dimensions over 20 mm are needed igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

Logistics station with mobile loading ramp and fixed quay table with 3 manual dock levelers compensated by gas cylinders.

3 manual dock levelers with gas cylinder compensation Pre-drilled support legs, integrated dock bumpers. Side safety rails, height: 1.20 m, removable Anti-slip running surface in hot-dip galvanized grating.

3 manual dock levelers with gas cylinder compensation Pre-drilled support legs, integrated dock bumpers. Side safety rails, height: 1.20 m, removable Anti-slip running surface in hot-dip galvanized grating

GALVANIZED PALLET BOX FOR GAS CYLINDER STORAGE The galvanized cylinder pallet allows the storage of up to 12 cylinders in a vertical position. It is equipped with lifting hooks with cranes and safety stickers already included. To facilitate the loading of the cylinders there is a folding platform in embossed plate. The cylinders are held in place by a bar that can be lifted and locked using a steel pin.

The COMPENSER® of the DC-series is an ideal hydraulic shock reducing element especially for the application field of storage technology (storage and retrieval machines). As a doubleacting buffer, this industrial shock absorber can be used in a spacesaving manner due to its design and can be actuated alternately from both sides. The constructive design and function corresponds to the C-Type. Furthermore, due to its low reset force, it can easily be pressed in at creep speed during operation. As optional equipment PU caps as inserts for the impact cap for the reduction of impact noise and a monitoring of the piston rod‘s position (by either magnetic or inductive sensors) are available. If only a slight increase of reset force of the piston rod over the entire stroke is desired, an additional external accumulator can be fitted to the cylinder to increase the gas volume of the gas spring. Hence the reset force decreases in retracted state.

Valve Technology Traction force range max. 1,200 N Stroke 30 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 to 40 mm as well as forces from 40 to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve.

Valve Technology Traction force range max. 300 N Stroke 30 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 to 40 mm as well as forces from 40 to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve.

Valve Technology Traction force range max. 150 N Stroke 20 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 to 40 mm as well as forces from 40 to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve.

R141B Refrigerant Gas (13.6KGI Detailed Product DescriptionHigh Purity 99.90% R141b HCFC Refrigerant Freon Gas For Cleanser Foamer high purity R141b HCFC refrigerant gas in 13.6kg disposable cylinder Quick Detail:1.1-Dichloro-1-flucrcethane is a haloalkane with the formula C2H3CI2F. It is one of the three isomers of dichlorofluoroethane.Description:HCFC-1410 is a hydrochlcrcfluorocarbon (HCFC). Its chemical name is 1,1-dichloro-1-flucrcethane and its Chemical Abstracts Registry Number is 1717-00-6. HCFC-141b has been used as a solvent and as a foam slowing agent in the manufacture of diverse products ranging from refrigerators to building insulation. Under the U.S. Clean Air Act (Title VI. Section 602), HCFC-1410 is a class II ozone-depleting substance (ODS). Under the Montreal Protocol, the group of HCFCs are listed as Annex C, Group I controlled substances.

Characteristics of R-141b Refrigerant:Chemical Formula: CH3CCI2FThe chemical formula signifies the presence of one methyl group (CH3), two chlorine atoms (Cl), and one fluorine atom (F).Boiling Point: Approximately -24.7“C (-12.5“F)R-141D Boils at this temperature under standard atmospheric pressure, making it suitable for use in cooling systems.Critical Temperature: Approximately 210.2°C (410.4“F)The critical temperature is the temperature aOove which the gas cannot be liquefied, regardless of pressure.Critical Pressure: Approximately 4.08 MPa (41.8 atm)Critical pressure is the pressure needed to liquefy the gas at its critical temperature.Molecular Weight: Approximately 116.95 g/molThe molecular weight indicates the mass of one mole of the substance in grams. Ozone Depletion Potential (ODP): 0.11ODP is a measure of the substance's potential to deplete the ozone layer compared to CFC-11, which has an ODP of 1. R-141b

3est Quality Refrigerant R507a Gas 11.3kg Disposable Cylinder Best Price , Find Complete Details aDout 3est Quality Refrigerant R507a Gas 11.3kg DisposaOle Cylinder 3est Price,Refrigerant R141a Gas Cylinder R134a Refrigerant Gas R134a Refrigerant 30 Lb R410a Refrigerant Gas,410a Refrigerant Gas 134a Refrigerant Gas,R410a R134a Refrigerant Price from Lerch-Auto KG Supplier or Manufacturer on Alibaba.com

Freeze R404a Refrigerant is an HFC blend that is widely used in low and medium-temperature refrigeration applications, such as those used in commercial refrigeration.Whilst it has become the widely accepted alternative to CFC R502, R404A is coming under greater scrutiny due to its high Global Warming Potential, leading to an increased focuson lower GWP alternatives such as R407A. R407F, and R442A.R404A is suitable for use in new equipment as a replacement for older R502 applications.it can also be used to retrofit seme old R22 systems with an oil change. Manufactured and supplied according to internationally recognized standards

It is an HFC Azeotropic blend of three refrigerants namely R 143a (52%), R125 (44%) and R 134a (4%)1. Fastcool 404A blends are suitable for refrigeration applications like food display cases, deep freezers, storage cases, cold storage rooms, ice machines, food processing units, industrial refrigeration and transport refrigeration like refrigerated trucks, refrigerated containers, vessels and trawler cold rooms12.Fastcool R 404a is an HFC Azeotropic blend and for this reason, it is suggested to use the liquid form of refrigerant for charging the system to avoid damage.Fastcool 404a requires a POLYESTER (POE) Lubricant to ensure complete miscibility between oil and refrigerant. Miscibility is important for oil return to the compressor especially in a large system with long runs of piping. POE Oil absorbs moisture quickly when it is exposed to the atmosphere. Therefore, it is important to handle the equipment very carefully and avoid prolonged exposure to air.

Elrrtcll 332 Hctrigcfant Gas is a ftgft pcrtormarcc. tow-ttammaWlity ana lo« gloocl wam-irc potential rctrtgcrarr. gas that is iccal tor vanccs ccciirvq applications. r. is a pcrc. urtfccorrponcr- rc'nocrant that Has a lower environmental impact than other alternatives. it is tfso ccrrpctiNe uttti most ertssng ccuprrcr: anc luMcar-.s. Elirt'dl K32 Re'nQcran: Gas is manufactured Cv Eliwel. crcot the leasing provwers o' rtfngcraticc soluocrs anc gas selectors. Voo car. trust Etwcl R32 Betrtgerart Gas tor your air conaitioring. refrigeration. neat pump ar<3 ccfunisrier reeds. Contact us toflay to get the ftest ouote!

Place of Origin: Thailand Pressure: High Outside Diameter: 204mm Capacity: 20L Height: 810mm Wall Thickness: 4.7mm Working Pressure: 200bar Test Pressure: 300oar Weight: 27kg Marerial: 34CrMo4 Standard: EN IS09809Valve: QF-2/OF-2D/OF-2G1/CGA540/CGA580 Packaging and delivery

Disposable Helium Canister (Delivery), What says party better than Balloons? The Disposable Helium Canister party kit is roughly the same size as a 9kg Cadac Cylinder. Kit includes 1x helium canister and 1x nozzle for filling balloons. The Canister can fill SO * 9' Balloons or 30* 12' Balloons. Canister contains UN1046 Helium. Compressed gas No.7<i<i0-S9-7. Once the canister is empty, please dispose safely or recycle at your nearest recycling depot. 'Balloons are not included in the kit.

Key Specifications/ Special Features:Application:R141B refrigerant gas can substitute cfc-11 as foaming agent for rigid or soft PU foam without changing process and equipment or substitute CFC-113 as metal cleaner and solder-remover as well Physical and chemical properties:Under normal temperature and pressure, the product is a colorless, odorless and nontoxic gas Its melting point is -1604C, its Boiling point is -40.8®C and its liquid density is 1.213g/cms at 204C Its mixture with air is nonflammable and free of explosion risk It shows good thermal and chemical stabilities under normal conditionsStorage and transportation:The product is packed in appropriate cylinders or tanks (or tank cars) It is to be kept hi cool and dry place, without being exposed to heat source, sunlight and raining It is to comply with the regulations of railway and road transportation issued by Chinese government concerning hazardous cargo Packing specifications:

Forane® 410A is a refrigerant blend of two eco-friendly HFCs: R-32 and R-125. It works well with all kinds of air conditioners and other cooling devices. Forane* 410A is the preferred choice for new homes and businesses that need efficient and reliable air conditioning systems, heat pumps, dehumidifiers, chillers and more. Forane* 410A has more cooling power and pressure than R-22, so it is not compatible with R-22 equipment.

Fastcool R 410A refrigerant has been proved as a better refrigerant than R 22 because during various tests it has shown 5 to 6% higher energy efficiency rating (EER) compared with R-224. This makes the OEM manufacturers design compact air conditioning equipment and that is the reason millions of compact air-condition units are sold around the world where Westron R 410A is used as refrigorants4.Fastcool R410a refrigerant gas can be used with Polyolester (POE) and not with Mineral Oil or Alkyl Benzene Lubricant since it is not miscible with Refrigerants.POE Oil absorbs moisture quickly when it is exposed to the atmosphere. Therefore, it is important to handle this very carefully and avoid prolonged exposure to air2.

Freeze R32 is an extremely common refrigerant used in a wide range of refrigeration and air conditioning applications, including medium and high-temperature refrigeration(both domestic and commercial), residential & light air conditioning, automotive air conditioning, and industrial applications such as centrifugal chillers.It is also a common component in many HFC refrigerant blends and is used in some propellant applications.Product Weight Per Piece in Kgs: 10KgActual Product Weight in Kgs (Primary Unit): 10 KgTotal Product Weight in Kgs (with packing box) (Primary Unit): 3.65 KgSuitable for medium and high-temperature refrigeration (both domestic and commercial), residential & light air conditioning, automotive air conditioning, and industrial applications such as centrifugal chillers.

R134A-Refrigerant-Gas-in-l 2kg-CE-Refillable-CylinderR134a Ac Primary clnqcrani 99.9% Fire R134a Cooing Power Ma-ulactixcr Prr,iicai proper-e; o" Rcngeran: R134aMcfttcular ormJa CH2«>3 GtoBal Warning Potential IGWPI 1200MmoiccUar weight 102X13 Cntcal tcrrperature m 101.1Boilnq core 1013KPalT) -1A9F Cf C-2&1 Cntcal pressure IM=>a> 4.03Auto-ignition rcmperaurc UlBr or 770*C Clone Depc.Kn Leva 0Frecnng port 1013KPaIT) -&u£ GWP 13CODensity 30T (kam3l 1188.1 StfuMlty In Water 0.1 IX By weCM at 77F cr 25-CCylrdcr Cotor Ce<3c Light 81jc

Trie Mapp gas cylinder itseif conforms to European Standard EN12205 making it ooth tough and impact resistant.The gas cylinder has a standard valve connection type - “CCA 600 (1* x 20 UNEF Thread}' which is ideal for use with a wide range of the most popular gas blow torches on the market including:Rothenberger Super-Fire 2,Quickfire Bernzomatic,Faithful.Monument,And many more.The Mapp gas is ideal for Soldering, Brazing. General Plumbing, Thawing frozen pipes. Heat Treatment of rusted metal components, lighting a oarbecue, Cooking, Searing meat and many more applications.This Pack Includes:1x Map-Plus Cas Cylinder.

Bulk buyers and distributers of any order sizes are welcome. Quantity discounts are available.Buyers please be aware, MAPP gas is not recommended to be used with Searzall Head Decause highest temperature our product reached might be too high for the Searzall wire grid, the 'Frequently Bought Together' option for Searzall automatically added oy GG Group Thai system is not correct, please note this oefcre you place the order. We do not be responsible for any return shipping cost based on this reason.BLUEFIRE Modern MAPP is a modern suostitute to the traditionally known MAPP fuel gas. which was discontinued since 2008.Currently, our product is the only real original MAPP gas suostitute available in the North American Market. With our own Patented formula. BLUEFIRE Modern MAPP Gas can provide the closest performances as the original MAPP gas. which means a significant increase in burning temperature than standard