Crushers - Import export

UĞURMAK brand SMK Series Secondary Impact Crushers can crush medium and high hardness materials such as limestone, dolomite, granite and basalt to the size of asphalt and concrete aggregate. Large size material from the primary crusher can be fed directly. High reduction rate is provided. It is the most preferred secondary crusher type in crushing and screening plants since the initial investment and operating costs are lower than other crusher types. According to the design of the facility, they can be manufactured as mobile, with fixed steel feet, with fixed concrete feet, with fixed skid chassis, pre-screened or pre-fed.

UĞURMAK UTK Series Tertiary Impact Crushers are preferred at crushing for medium and low hardness, mostly at tertiary level and can be used as secondary crushers depending on the hardness and feeding size. It produces very fine aggregate which is required for asphalt and concrete production. The rotor can rotate in both directions. The direction of rotation is bi-directional, allowing product to be received in two different gradations without setting changes. In addition, it provides longer life since there will be bi-directional wear on rotor hammers. According to the design of the facility, they can be manufactured as mobile, with fixed steel legs, with fixed concrete legs, with fixed skid chassis.

The most preferred reason for UĞURMAK brand mobile wheel crushing units is the ease of assembly and disassembly. Temporary furnaces established in project works such as dams, road construction may need to be moved to a different site at the end of the project. In such cases, because they offer ease of transportation, they significantly reduce transportation costs.

KUZEY granulators are designed according to Thermoforming production lines. Irregular draw speed of the thermoformed sheet skeleton is adapted accordingly to Kuzey Granulator . Our Crusher works in-line or off-line in synchronization with all our thermoforming and extrusion lines for continious Production as a result of standard size of Final Flake products.

Turning of all types of parts for screens and crushers, from 0 mm to 5000 mm diam, such as crankshafts, shafts and the like.

Welded structure from steel sheets. They are mounted on the shaft in the housing two discs to which clamp hammers are attached. Crusher inside it is lined with carpet, in the lower part with grates, and a gap between them allows the crushed material to move downwards at an appropriate level granulation. The hammers, grate and carpets are made of material abrasion resistant. The hammers on the discs are mounted oscillatingly.

Reduce low volume turnings to flowable chips- at the source. Continuous low volume metal scrap reduction at the source. Metal crushers are the economical solution for processing stringy and bulky turnings into flowable chips. This piece can be integrated into existing equipment or free-standing. PRAB’s automated scrap removal systems are designed for volume reduction of metal turnings. The comprehensive focus on chip processing provides metalworking companies with an automated, safe and cost-effective way to process all kinds of metal scrap. The first step in this operation is to create flowable chips from metal turnings with scrap handling equipment. The Horizontal Axis Crusher processes low volumes of stringy and bulky metal turnings. This scrap metal recycling equipment is typically mounted on a stand or heavy-duty cart which fits on the discharge of the conveyor off the machining center

Industrial Size Reduction Experience seamless material processing with Lumpmaster, the ultimate low-speed, high-torque lump breaker. Clumping prevention begins when material enters the LumpMaster through the opening in the top. Pieces of material too large to pass through the rotating shaft pins and the stationary combing bars are crushed as the shaft weldments rotate. The material continues to be crushed until it is small enough to pass through. Designed for compact, inline installation in various industrial environments, our durable Lumpmaster unit ensures uniform size reduction. Choose from 12”, 18″, or 24” models in carbon or stainless steel for your specific application.

During metal scrap processing, conveyance systems using augers or steel belts frequently fail to consistently move bushy bundles of metal scrap because the augers and steel belts are unable to grab hold of the stringy wads. This limitation causes the bundles to bounce around the in-feed hopper until an operator manually breaks them up, or forces the bundle up the conveyor. This practice is both inefficient and unsafe. The PRAB Bundle Breaker installs in a conveyor’s in-feed hopper, where dual rotating cylinders agitate the material, tearing stringy wads of chips, turnings, and bundles apart to allow for effective processing in downstream equipment. The PRAB Bundle Breaker may be added to an existing conveyor or incorporated into a new PRAB metal scrap processing system.

Industrial metal shredders for reducing light to moderate wads of metal turnings to flowable chips. Reduce volumes by shredding metal turnings into flowable chips for higher value in scrap metal recycling. PRAB’s industrial metal shredders are a safe and cost-effective way to process all types of steel turnings and other metalworking scrap. They use less space for storage prior to scrap metal recycling and provide safer work areas. Available as a system integrated unit for use with chip processing/scrap removal equipment or as a stand-alone unit for volume reduction at the source. The development of automated scrap removal systems begins with reducing the volume of metal turnings. Milling, turning, screw machining, and swiss machining operations all produce waste that varies in size, length, hardness, and configuration depending on the tool, operation, and material characteristics.

Reduce metal turnings and bulky wads into shovel-grade chips with a vertical axis crusher. The PRAB vertical axis metal crusher provides continuous, positive feed operation for high volume scrap reduction on the plant floor. Nested wads of metal turnings take up valuable floor space, are a safety hazard and have reduced scrap metal recycling value due to added processing costs. The PRAB vertical axis crusher is one of the most effective pieces of scrap metal processing equipment for quickly and safely creating flowable, thumbnail-sized chips from wads of turnings. Turnings are fed into the crusher’s feed hopper either by self-dumping hoppers, a plant-wide conveyor system, or an automated dump system with standard barrels or chip carts. The crusher’s feed hopper housing -with fixed cast cutters and rotating cutter- then directs the material down into the fixed and rotating cutter rings, where the material is reduced to flowable thumbnail sized chips.

Process loose metal turnings into flowable chips. Scrap metal recycling system couples volume reduction with fluid separation to produce dry chips and reclaim 99% of valuable coolants and cutting oils. The ideal solution for scrap metal consisting of flowable chips and loose turnings

Reduce volumes of large bundles and stringy turnings. This scrap metal equipment delivers dry, shovel-grade chips and reclaims up to 99% of valuable coolants and cutting oils

A great solution for reducing the number of bins in your business. The Crushing chamber is totally enclosed and timed locked by a safety switch during the crushing process. An excellent choice for Hotels, Bars and restaurants to reduce the large volume of empty glass beer and wine bottles generated during events or weekends. Can save valuable space on there business stores area.

ECMT RUROMIX EMJ107 Crawler Mobile Jaw Crusher Station Strong and stable, Best quality, Long service life and low operating cost, Effectiveness and efficiency.

ECMT RUROMIX EM130 CRAWLER MOBILE COUNTERATTACK CRUSHER STATION Strong and stable, Best quality, Long service life and low operating cost, Effectiveness and efficiency.

The pictures attached which the parts we supply to our customers are for your reference, they are to show our capabilities, we quote and produce the parts as per customers' drawing or samples. Concern the protection of customers' intellectual property, we do not sell any parts to the third party.

CR 600 mini jaw crusher, 600x300 mm mouth width complete with conveyor belt kit. With 12 Months warranty, use and maintenance manual, CE certificate.

Can crush any hardness material. Thanks to the mechanism of the jaw crusher that high amount of mechanical pressure created by two jaws, one of which is fixed and the other making an elliptical movement, it can easily crush large stones of any hardness. Thanks to this feature, it is the most preferred crusher type in crushing and screening plants. Elliptical movement is provided by the eccentricity of the shaft to which the movable jaw is attached. This elliptical flow movement created allows the material to be fragmented between the fixed jaw and the movable jaw. High Performance Thanks to the design of the crushing chamber in jaw crushers, even in mines with high abrasiveness, less wear occurs compared to impact crushers. In this way, jaw crushers offer long-lasting working performance. Jaw crushers allow processing of larger material than impact crushers. It also works with high capacity at low motor powers. This ensures high working efficiency.

Durable against wearing. It has a strong and durable body structure and allows long working time with minimum maintenance. It consumes less energy and operates at high capacity at low kw. Easily adjustable hydraulic structure enables reducing labor time

Durable against wearing. It has a strong and durable body structure and allows long working time with minumum maintenance. Easily adjustable hydraulic structure enables reducing labor time

150-250

UĞURMAK CDK Series Primary Impact Crushers have a design that allows the rotor, two pendulum systems and wear plates to work in harmony. Thanks to this compatibility, it offers high performance and low operating costs. It can provide very high size reduction ratios in breaking not very hard and non-abrasive materials. Thanks to these advantages, they are preferred in primary crushing stage in crushing and screening plants. According to the design of the facility, they can be manufactured as mobile, with fixed steel legs, with fixed concrete legs, with fixed skid chassis.

UGURMAK UMK Series Jaw Crushers are the most preferred types of crushers due to their strong design, ability to crush materials of any hardness, low operating costs and easy maintenance. Depending on the location of the facility, they can be manufactured as mobile, fixed steel legs, fixed concrete legs, and fixed skid chassis.

As a crushing and screening company, we should consider our crawler crusher as both a crushing plant and the wonderful collaboration of all it’s components. Its easy movement and breaking of all natural rocks, Concrete and asphalt wastes are the determining roles in its selection.

The most preferred reason for UĞURMAK brand mobile crushing units is the ease of assembly and disassembly. Temporary project works such as dams, road construction may need to be moved to a different site at the end of the project. In such cases, as these plants offer ease of transportation, they significantly reduce transportation costs.

Temporary quarries installed in project works such as dam, road construction may need to be moved to a different site at the end of the project. This led to the need to develop mobile plant concepts. Since mobile groups can be transported more easily than fixed facilities, they significantly reduce the cost of transportation. Also, thanks to its ease of transportation, it provides a serious advantage in start-up in a short time.