Results for
COLORSLED
China
Luminance efficiency Max up to 220LM/W Self-encapsulated design offers 4 optional 2700-6500K white lights With life span over 60000H NA/SG/ET/EF/EG IP process
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
Product Name: Brass Strips Coil Foil for Decoration Application: Electronic, telecommunications Width: 3mm-1220mm Material: Brass Grade: Brass Coil Cu (Min): 64.0-68.0% Model Number: C2680,C2680,C2700.etc. Place of Origin: China Processing Service: Bending, Welding, Decoiling, Cutting, Punching Shape: Strip Coil Roll Temper: O, 1/4H, 1/2H, 3/4H, H, EH, SH Alloy brand: C2680, C2600, etc Standard: JIS ASTM DIN EN ISO Surface: Mill,Polish,Bright,Hair line,Brushed,etc. Package Type: Standard export seaworthy package,or as required. Payment term: T/T,L/C etc. Port of shipment:Xiamen,China Lead time:15-30days
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
width 100mm thick 0.02mm
Request for a quoteXIAMEN NINESUN IMP. & EXP. CO., LTD
China
Processing Technology: Electrolytic Foil Base Material: Copper Insulation Materials: Epoxy Resin Certification: UL, RoHS, ISO9001, Ts16949 Transport Package: by Vacuum Packing in Cartons Specification: UL, ROHS, SGS Origin:China HS Code: 85340090 Min. Order: 100 Pieces Port: China Production Capacity:100000 Square Meters Per Month Payment Terms: L/C, T/T, D/P Type: Rigid Circuit Board Dielectric:FR-4 Material: Fiberglass Epoxy Application: Consumer Electronics Flame Retardant Properties: V0 Mechanical Rigid: Rigid
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
DBC (Direct Bonded Copper) tenique denotes a special process in which the copper foil and the al2o3 or AlN (one or both sides) are directly bonded under appropriate high temperature. The finished super-thin DBC substrate has excellent electrical isolation,high thermal conductivity, fine solderability and high bonding strength.It may be structured just lick PCB to get etched wiring and has high curreng loading capability .Therefore DBC ceramic substrates have become the base material of tuture for both the construction and the interconnection techniques of high power semiconductor electronic circuits and also have been the basis for "chip on boaed" technology which repre-sents the packaging trend in century. Specification >Metallization thickness: 25 ±10um >Nickel thickness:2~10um >Pin full strength: 4200kgf/cm2 avg. (at Φ3.0mm pin)
Request for a quoteBELIT ELEKTRONIK LTD
Turkey
Samples for shielded cables. Shield types are aluminium foil and copper braid.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Copper 102 is an oxygen-free copper with extremely high electrical conductivity and good formability. These characteristics make it particularly useful for electrical connectors. Copper 102 can be deep-drawn from the annealed temper.It is corrosion resistant in normal atmosphere and water. A thin adherent oxide film forms at elevated temperatures which prevents particle contamination and enhances glass to metal seals. The Copper 102 can be readily soldered and brazed. The absence of oxygen makes welds free of inclusions. Available Sizes: Copper 102 is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.010” (0.0127 mm to 0.254 mm) in widths up to 12.0” (304.8 mm). The material conforms to ASTM B 152 and UNS C10200. It is also available in thickness less than 0.0005” (0.0127 mm) in widths up to 4.000” (101.6 mm) maximum.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Copper alloys exhibit very high electrical and thermal conductivities, offering twice the conductivity of aluminum and thirty times the conductivity of stainless steel. Other advantageous characteristics include outstanding strength (notably copper beryllium alloys) and corrosion resistance as well as antimicrobial properties. Copper is most commonly used in electrical and electronic applications.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Phosphor Bronze A is a Copper base spring material with a good combination of strength, formability, and corrosion resistance. The material is suitable for use in certain contact springs and diaphragms. The alloy has good formability up to moderate strength. It can be soldered, silver brazed, and resistance welded. Available Sizes: Phosphor Bronze A is available from Hamilton Precision Metals as strip products in thicknesses from 0.001” to 0.020” (0.0254 mm to 0.508 mm) in widths up to 12.0” (304.8 mm). The material conforms to ASTM B 103 and UNS C51000.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Beryllium Copper 25 is a Copper base alloy with the capability of being strengthened by precipitation heat treatment. The alloy furnishes the best combination of electrical conductivity, corrosion resistance and mechanical strength necessary for numerous electronic and electromechanical devices. The alloy is quite satisfactory for fabrication with good formability and joining characteristics. Forming is readily accomplished from the annealed temper. Severe bending will be less successful from hard or heat treated tempers and requires large fold radius ratios. Beryllium Copper 25 is able to be soldered, brazed, and welded by most standard techniques. The brazing temperature must be kept under 1450º F and cycle time minimized to avoid loss of heat treated strength. Heat treating should be performed subsequent to welding to obtain uniform high strength. The alloy is not susceptible to an increase in magnetic attraction from plastic deformation during service
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Shunt Manganin is a Copper-Manganese resistance alloy used for shunts in various high current applications. The alloy has a low temperature coefficient of resistivity with peak resistance at about 50°C. The thermal EMF vs. Copper is very low. The alloy can be easily formed from the annealed temper.The maximum recommended operating temperature in air is 200°F. Available Sizes: Shunt Manganin is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005 to 0.053” (0.0127 mm to 1.346 mm) in widths up to 12.0” (304.8 mm). It is also available in foil as thin as 0.000100” (0.00254 mm) in widths of 4.0” (101.6 mm) maximum.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Cu-Ni 715 is a copper-nickel alloy that is resistant to corrosion in sea water. The alloy has good fatigue strength and relatively high thermal conductivity. This alloy is used mainly for flexible metal foil heaters. The alloy is readily formed in the annealed temper, and can be joined by the standard welding, brazing and soldering processes. Available Sizes: Cu-Ni 715 is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.010” (0.0127 mm to 0.254 mm) in widths up to 12” (304.8 mm). The material conforms to ASTM B122 and UNS C71500.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Constantan® is a copper-nickel alloy that contains specific minor amounts of additional elements to achieve precise values for the temperature coefficient of resistivity. Careful control of melting and conversion practices results in a very low level of pinholes at ultra-thin thicknesses. The alloy is used extensively for foil resistors and strain gauges. The TCR can be adjusted from the furnished cold rolled values by using a low temperature heat treatment to achieve compensation for all types of spring elements. The foil is normally supplied with 90% cold reduction and a smooth bright surface. The foil is reasonably flat at 4” wide and nearly free of pinholes. The cold rolled foil can be produced with a TCR between +10 to –35 PPM/°C. The heat treatment will shift the foil TCR to the desired value. A typical heat-treat curve for Constantan® shows decreasing resistivity but increasing TCR with increased heat-treating temperature.
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
Hamilton Precision Metals is the world leader of precision-rolled foil and ultra-light gauge strip in any alloy. This includes stainless steel foil, titanium foil, nickel foil, copper based foil, cobalt based foil, Constantan® foil, Evanohm® foil, and many other alloys. Metal foil is generally defined as strip 0.004” (0.1016 mm) and below. Cold rolling strip to these extremely thin gauges demands extensive rolling expertise to manufacture with precision and consistency. Foil in Any Alloy We offer the broadest portfolio of almost every high performance alloy made today. Additional alloys are available upon request, contact us today! Stainless Steels Nickel Based Alloys Copper Based Alloys Cobalt Based Alloys Commercially Pure Titaniums Strain Gage: Constantan®, Evanohm®, Tightest Tolerances and Thinnest Gauges in the Industry We custom roll metal foil in nearly any alloy and specialty metal to the tightest tolerances and thinnest gauges
Request for a quoteEXPERT-CABLE, LLC
Russia
Control cable with copper cores, PVC insulation/ polymer halogen free composition, inner PVC, polymer halogen free composition covering, PVC sheath, shield: copper foil or tapes, aluminium foil, armour: zinc-coated steel wieres, zinc-coated steel tapes.Application: control cables are used indoor or outdoor, and in the ground. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured
Request for a quoteEXPERT-CABLE, LLC
Russia
Power cable with copper cores, EPR insulation, PVC sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tapes, zinc-coated steel tapes, aluminium wires.Application: these cables can be used indoor or outdoor, and in the air and in the ground. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EXPERT-CABLE, LLC
Russia
Flexible cable with copper cores, PVC insulation/TPE insulation/EPR insulation/ polymer halogen free composition, inner PVC/TPE insulation/EPR insulation/ polymer halogen free composition covering, PVC sheath, shield: copper foil or wires, armour: zinc-coated steel braids, zinc-coated steel tapes.Application: flexible cables are used for the connection of movable machines and appliances, machinery and equipment to the electric grid for laying in the cable installations and industrial premises. TPE- insulated/PVC-insulated/ EPR- insulated/halogen free/ fire resisitant/ flame-retardant/ cold resistant/low smoke/ low smoke and toxic fumes/ shielded
Request for a quoteEXPERT-CABLE, LLC
Russia
Halogen free power cable with copper cores, polymer halogen free composition insulation, inner polymer halogen free composition covering,polymer halogen free composition sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tape, zinc-coated steel tapes Application: Cables are used in the public places ( kindergardens, schools, hospitals, malls and etc.) where the fire is the main treat because of the toxic fumes and the thick smoke which can make it difficuilt to evacuate the people. Fire resistant/flame-retardant/shielded/armoured)
Request for a quoteEXPERT-CABLE, LLC
Russia
Power cable with copper cores, XLPE insulation, PVC or polymer halogen free composition sheathed power cable, shield: copper foil, tape or braids, armour: zinc-coated steel wire, aluminium tape, zinc-coated steel tapes.Application: these cables are suitable for indoor and outdoor installation, in air and ground, where the cables should be flame retardant and halogen free. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free
Request for a quoteSONIKKS® ULTRASONICS TECHNOLOGY GMBH
Germany
Our 20 kHz roll seam welding heads are particularly suitable for continuous welding of thin aluminum foils or copper foils. Ultrasonic roll welding is similar to ultrasonic welding. Due to the discshaped sonotrode, however, a continuous weld can be generated without interruption. Thanks to the inductive energy coupling, the 20 kHz roll seam welding heads are maintenancefree.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For fixed installation indoors, outdoors, in ground and in waterThe structure of conductor core is single-wire and conforms to 1or 2 class flexibility according to the standard IEC 60228:2004. On fillers of insulated sheaths a round copper wire (10-12) net and copper foil is wound, which performs protective and neutral cores function. The sections of conductor cores are: 1,5-10,0mm2 Number of conductor cores: 1,5-2,5mm2 4-5-7-10-12-14-19-24. 4-6mm2 4-5-7 10mm2 4-5Label attached to wooden drum or bundle, or in case of request of the customer with inscription on top: “JSC Sakcable” cable brand, year of manufacture. Labeling of conductor cores with colors or numbers with inscription on the surface of insulated cores.
Request for a quoteResults for
Copper foils - Import exportNumber of results
23 ProductsCompany type
Category