Copper braid - Import export

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).

PE-INSULATED, LOCAL TELECOMMUNICATION CABLE WITH COPPER SHIELD In all kinds of operating premises (excepted locations with special protection demands - like in fire or highly combustible premises); e.g. for local area networks of the telecom, as station communication cables and for small telephone networks of industry, traffic and public utilities.

The RF 400-AL high-frequency cable from bda connectivity is suitable for radio data transmission, WiFi and other applications of 50 Ohm technology and is specified for use up to 6 GHz (5G). The CCA inner conductor is surrounded by an insulation layer of physically foamed Cell-PE, double-laminated aluminium foil and a braid of tinned copper as the outer conductor, covered by a black PVC jacket. This ensures UV resistance and good laying properties.

AXON'CABLE offer lightweight microwave coaxial cables: they are 30% lighter than the avionics WN standard. Light and thin, they exhibit excellent mechanical and electrical performance. Advantages Excellent attenuation values, 15 dB for 100 m at 1 GHz, Temperature rating: -55°C to +180°C, Characteristic impedance: 50 Ω, In accordance with EN 4604-009 avionics KW standards. Construction Axon' lightweight coaxial cables are made with: an aluminium conductor and a Celloflon® dielectric (expanded PTFE), a silver plated copper braided shield, a reinforced aluminium braided shield and a FEP outer jacket. Can be terminated with (up to 18 GHz): SMA plug, straight or swept 90° TNC plug, straight or swept 90° N plug, straight or swept 90° N jack, straight up to 12 GHz. Applications Aircrafts, Helicopters.

Samples for shielded cables. Shield types are aluminium foil and copper braid.

50P D-sub connector assemblies, Amphenol M24308 series, copper braid shielded, crimp contacts. Amphenol's D*MA Series D-Sub Connectors are qualified to MIL-DTL-24308 and a selection of subminiature rack & panel type connectors with polarized shells. They use pin & socket machined contacts that provide high reliability & density for the connectors. With its versatile design, these high-performance connectors are used in a variety of applications where weight & dimensions are critical factors.

Halogen free power cable with copper cores, polymer halogen free composition insulation, inner polymer halogen free composition covering,polymer halogen free composition sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tape, zinc-coated steel tapes Application: Cables are used in the public places ( kindergardens, schools, hospitals, malls and etc.) where the fire is the main treat because of the toxic fumes and the thick smoke which can make it difficuilt to evacuate the people. Fire resistant/flame-retardant/shielded/armoured)

Power cable with copper cores, EPR insulation, PVC sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tapes, zinc-coated steel tapes, aluminium wires.Application: these cables can be used indoor or outdoor, and in the air and in the ground. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free)

Power cable with copper cores, XLPE insulation, PVC or polymer halogen free composition sheathed power cable, shield: copper foil, tape or braids, armour: zinc-coated steel wire, aluminium tape, zinc-coated steel tapes.Application: these cables are suitable for indoor and outdoor installation, in air and ground, where the cables should be flame retardant and halogen free. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free

Power cable with copper cores, PVC insulation, inner PVC covering, PVC sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tape, zinc-coated steel tapes.Application: PVC -insulated power cables are used for the electricity transmission and distribution in the fixed installations for operating at a nominal alternating voltage of 0,66; 1;3 and 6 kV and nominal freqiency 50Hz. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured

To be used as halogen free, flame retardant and environmentally power, control and connecting cable in electrical facilities, in fire vulnerable areas and facilities with high concentration of people and proberty values, for fixed laying and flexible applications without tensile stress and without defined cable routing. Suitable for use in dry an humid rooms. Outdoor use only with UV-protection, no laying underground. The copper braided screening prevents electrical and magnetic interference of the control cable with the environment and of the environment with the internal cable cores.c

Contured fabric tapes, braided into a tube and then flat-rolled. Made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.40 mm. Cross-section ranging from 25 mm² to 120 mm². Our flat-rolled fabric tapes are characterised by straight rectangular edges with a very high degree of dimensional accuracy and very close tolerances. There is an adjustable degree of compaction, with cross-section remaining unchanged, as well as an easy combination of different cross-sections laid on top of each other (modular system). Contured, braided copper tapes have an improved weldability in automated production processes for manufacturing of earthing straps, connectors or electrotechnical components.

Compact braided round copper flexibles made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, in hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.047 mm² to 25 mm² (bigger cross-sections upon request). Round copper braids are characterised by a very high degree of dimensional accuracy and a very high Flex life. They are absolute free from twist and support an automatic further processing. Compact braided round copper flexibles are particularly suitable for carbon brushes industry, connection technology, switches or aviation industry.

Compact braided square and rectangular copper flexibles made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated or silver-plated. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.20 mm. Cross-section ranging from 0.47 mm² to 50 mm² (further dimensions upon request). Square copper braids require less space in comparison to round copper braids with the same cross-section. There is a precise positioning owing to square or rectangular shape, which allows for failure-free and fully automated downstream manufacture. Squre or rectangular copper braids are characterised by very good Flex life, being absolute free from twist, a compact cutting surface, a very high degree of dimensional accuracy and a very long lifetime. Compact braided square and rectangular copper flexibles are particularly suitable for applications in carbon brushes industry, connection technology, switches and aviation industry.

Fabric tapes, braided into a tube and then flat-rolled (if needed). Made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.40 mm. Cross-section ranging from 0.09 mm² to 400 mm². Our flat-rolled fabric tapes are characterised by a very high degree of dimensional accuracy. Suitable for earthing straps, connectors or electrotechnical components.

High-flexible copper-based ropes, enclosed by an additional braid, made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.35 mm² to 120 mm² (bigger cross-sections upon request). Our ropes with overall braids are characterised by their good flexibility and their excellent mechanical strength. The overall braid has a vibration-reducing function and prevents unrevelling of the rope. Ropes with overall braids are mainly suitable for automotive, industrial applications and for connectors.

The angle encoders without integral bearing (modular angle encoders) ERP, ERO and ERA consist of two components—a scanning head and a graduation carrier, which must be aligned with each other during mounting. The eccentricity of the shaft as well as installation and adjustment therefore have a decisive effect on the achievable accuracy. Modular angle encoders are available with various graduation carriers. The vacuum-compatible encoders are distinguished by the following features: • Air vents • Production in a clean room • Specialized cleaning and packaging • Cable with PTFE insulation and tin-plated copper braiding

These cables with tinned copper braiding protect against electromagnetic interference and signal distortion. They are mainly used in computer and voice systems, electronic control equipment, industrial data applications. Their flexible and thin structure makes them ideal for applications in narrow areas.

These cables with tinned copper braiding protect against electromagnetic interference and signal distortion. They are mainly used in computer and voice systems, electronic control equipment, industrial data applications. Their flexible and thin structure makes them ideal for applications in narrow areas.

These cables with tinned copper braiding protect against electromagnetic interference and signal distortion. They are commonly used where a high amount of circuit integrity is needed and where interference may prevent getting proper signals such as electronic control systems, heating and air conditioning systems and power plants. They can be used in dry, moist or wet places with medium mechanical stress. In the event of a fire, thanks to their HFFR compound, they do not catch fire easily and the fire goes off itself. These cables have low smoke density and they do not produce poisonous and corrosive gases during fire.