Controller - Import export

Thanks to our many years of experience in the controls sector, you can benefit from a comprehensive range of products that also includes the right solution for even the most demanding requirements. Control your cranes, machinery and installations with our wire-connected control pendants – and utilise the wide choice of configuration options. Or profit from the maximum flexibility, safety and reliability offered by our radio controls. All of our controls give you ergonomic design, convenient operation and many opportunities to tailor the solution to meet the needs of your application.

— RS 485 interface for internal Brabender fieldbus — Application software for DDW (loss-in-weight feeder), DBW (dosing belt scale) or Coriolis flow meters — internal pluggable fieldbus connection — can be controlled via the OP1, OP6 and OP16

— Congrav® CB-E installed in control box or cabinet — Supply voltage: 24VDC — control software for discontinuous dosing of gravimetric dosing devices — Operation on the Brabender fieldbus and master computer — Serial drive controller — Serial load cell — Digital signals — Integrated bus connector Operation: — Congrav® OP16-E — Congrav® OP6-E — Congrav® OP1-S

— Congrav® CB-S installed in control box or cabinet — Supply voltage: 24VDC — control software for discontinuous dosing of gravimetric dosing devices — Operation on the Brabender fieldbus and master computer — Serial drive controller — Serial load cell — Digital signals — Integrated bus connector Operation: — Congrav® OP16-E — Congrav® OP6-E

Simple operation and fully automated operation of up to four hot water or heating boilers (master/slave). Compact "plug and play" control with innovative connectivity. — Modular complete solution with cost advantage, for all single-flame-tube hot water and heating boilers — Intelligent sequence control for up to four boilers — Intuitive operation via colour touch display and function keys for quick access — Pre-configured and completely wired for quick commissioning — Integrated power supply in the compact control cabinet, e.g. for burner and pumps — Compatible with all common automation system protocols — Optional remote access via MEC Remote for maximum availability

— Connection via the Brabender fieldbus * Host computer interfaces — A maximum of 6 components — Operation of CM-E, CB-E, CB-S

— Compact component operation — Connection via a separate RS485 interface — Maximum 1 component — Operation of CM-E, CB-E — 5,7“ Color-Touch-Display

— Connection via the Brabender fieldbus — Host computer interfaces — Operation of CM-E, CB-E, CB-S — A maximum of 16 components — Recipes, diagrams, protocols

The ProMapper is the A&R table-top solution to provide state-of-the-art optical inspection according to the industry standards (ISO/ANSI), totally independent from the operator. In addition, it supplies freeform surface evaluation based on the A&R Error Map technology, making sure that no surface defect is shipped to the customer. Based on the Error Map, surface quality features like the GMC (Global Mapping Criteria) are evaluated and constitute extremely relevant inspection data for process control applications (Statistical Process Control).

The Focovision by Transmission SPV-3 is used in prescription laboratories. It is connected to your computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, easy calibration, and especially its visualization system of the semivisible marks or the upper segment line corner of the addition. This system permits an accurate positioning on the different control points without any lens marking. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it has a user friendly interface permitting an operator to learn how to perform the complete lens control (far view, prism reference point, near view, thickness, shape, etc.) with little training required. Minimal training required Very high measurement speed Flexibility (configurable procedures, easy to adapt, any toleran

The Dual LensMapper, integrated in this unit, gives a mapping of the prescription lens (freeform or conventional) and calculates FOA optical power at the reference points (FV, NV). For the freeforms, it compares the expected design to the real lens and displays an error map. A Go/NoGo decision is made, based on the error map and the list of criteria defined by the lab. Because the A&R AutoMapper is task specific, and the system has a small footprint, you can easily integrate it into the lab, either directly after the surfacing or in the final control (also suitable for checking the cut lenses). The AutoMapper is an excellent investment for a modern lab with a rapid payback! 100 % production control just after surfacing --> direct feedback on production* control of the cut lens - in case of remote edging Non contact measurement Correction of eventual R/L inversion Integrated Dual LensMapper : measurement of free form and conventional progressive lenses Control of power, cyl.

The Focovision by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it is equipped with a frame positioning device and has a user friendly interface; permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required. Positioning assistance: The FOCOVISION display provides assistance to the operator to help them position the frame and lens to be measured properly, creating a user friendly and fast process. The positioning target, displayed at every step of the procedure, and operator instructions projected

conTROL is an extremely robust EMC enclosure, which features EMC shielding without an expensive conductive gasket as standard. Continuous contact is created by means of a tooth system contour between the lid and bottom. It is ideal for every type of industrial internal mounting that requires special EMC protection. A lid with an extra-high collar edge and visually appealing bevelling is also available to protect buttons or switches on the front of the enclosure. The enclosure is water-tight and weather resistant. The interior contains fastening domes to accommodate mounting plates, supporting rails or circuit boards. Compatible cable glands are also availabe in the ROLEC product range.

FXL-CT table-top units are built for a maximum of 2 channels without preselection. They can be used to control magnetic chucks up to a total area of approx. 1.2m2. can be controlled. FXL-CT is designed as a table-top unit or to be attached to the machine wall by means of the magnetic feet on the back. The operation is carried out directly on the device.

IAI's new controller series: R-Unit R-Unit is the new generation of controllers that are coupled via module connections and are modularly interchangeable. These include the RSEL program controller for connecting up to 8 actuators (in combination with the REC EC control up to 16 actuators), the RCON position controller for up to 16 electric cylinders and the REC EC controller for motion control of up to 16 EleCylinder axes. Common to all of them are the linkable control units with identical connections, which allow a free selection and combination of connected electric actuators and their control methods. Mixed control of electric cylinders with 24 volt and 230 volt motors is also easily feasible.

The EPOS2 24/2 DC/EC is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 48 watts.

The EPOS2 Module 36/2 is an OEM positioning controller plug-in module for brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 72 watts.

The EPOS2 24/2 EC is a modular digital positioning controller. Matched with brushless EC motors with Hall sensors and encoder up to 48 watts.

The EPOS2 P 24/5 is a freely programmable positioning controller according IEC 61131-3. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.

The EPOS2 70/10 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 80 to 700 watts.

The EPOS2 24/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.

The DEC Module 24/2 (Digital EC Controller) is a 1-quadrant amplifier for controlling EC motors with Hall sensors with a maximum output of 48 watts.

The EPOS2 50/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 250 watts.

The ESCON Module 24/2 is a small-sized, powerful 4-quadrant PWM OEM servo controller for the highly efficient control of permanent magnet-activated brushed DC motors and brushless EC motors up to approximately 48 Watts.

Protherm controllers are universal configurable programmers that monitor, control and record processes running in a single furnace or simultaneously in multiple chambers. They are configurable for various types of batch and continuous furnaces. Installations are done on new or refurbished furnaces and are used for updating existing systems. FEATURES • Up to 32 PID control-loops to regulate parameters such as temperature, furnace pressure, atmosphere parameters (e.g.: carbon potential, nitriding potential and oxygen potential) • Real-time monitoring of jobs at all stages • Process parameters configured with alarm limits • Online diffusion calculation to control the process using required target values (e.g.: case depth, surface carbon content) • Up to 999 treatments/templates can be created and modified • Integration with SCADA systems • For all types of processes: nitriding, nitrocarburizing, carburizing, carbonitriding, plasma and vacuum • For compliance with CQI-9, AMS 2750 &..

Customer benefit • Consistent measurement (without interruption) • Suited to strongly distorted systems, zero crossing or phase-angle controls • I/O interface adaptable to individual requirements • Configuration and measured value acquisition via USB and Modbus interface • Acquisition of minimum and maximum values with time stamp • System analysis (harmonics and unbalance) • Synchronisable real-time clock as a time basis and operating hour counter • Graphic display with freely arranged measured value display and alarm handling • Logger for long-term recording of measured value progressions

Inherently RFI/EMC immune and most flexible in its class The joysticks of the series 842 exhibit properties, which are normally found in bigger joystick models only, even though it is a very compact finger joystick. Particularly worth mentioning is the possibility to configure the three axes independently and the option for a friction clutch in x and/or y-axis. The series is equipped with potentiometers, because potentiometers are still the best choice if EMI/RFI resistance requirements are very high. The joysticks are available with up to 3 axes, and exhibit a robust mechanical metal mechanism. This way the return properties of the x and y-axis can be changed by e.g. using a stronger or weaker spring, or by using a friction clutch.

Unique: The TRY20 offers 3 axes and is still a compact thumb joystick The joysticks of the TRY20 series are unique in their class thanks to their rotatable knob, which, as a z-axis, offers an additional third, proportional degree of freedom for controlling the application. The industrial joysticks achieve the highest level of quality in terms of mechanics, materials and workmanship. The high-quality haptics convey a secure operating feeling and enable the user to precisely control movements in several dimensions. Double (redundant) outputs are optionally available, which enable use in safety-critical applications. Variants with protection class IP40 (hardcover) and sealed variants (rubber bellows) with protection class IP54 are available. If the z-axis (the rotatable knob) is not required, the 2-axis version with protection class IP65 can be implemented as a special version.

High-quality haptics for one-dimensional control tasks The proportional rockers of the PW30 series meet the highest demands on quality and reliability for long-term use in industrial environments. With the look of a rocker switch but the sensor technology of industrial joysticks, the PW30 series combines the advantages of joysticks (for transmitting an analogue control variable) with those of toggle switches (flat design, low space requirement). In addition to two different rocker shapes, choices between potentiometric or Hall-effect sensor technology, as well as between spring return to the centre position or to the end position, are possible. Redundant versions are also available on request.