Results for
AUTOMATION & ROBOTICS (A&R)
Belgium
The Focovision by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it is equipped with a frame positioning device and has a user friendly interface; permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required. Positioning assistance: The FOCOVISION display provides assistance to the operator to help them position the frame and lens to be measured properly, creating a user friendly and fast process. The positioning target, displayed at every step of the procedure, and operator instructions projected
Request for a quoteAUTOMATION & ROBOTICS (A&R)
Belgium
The Focovision by Transmission SPV-3 is used in prescription laboratories. It is connected to your computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, easy calibration, and especially its visualization system of the semivisible marks or the upper segment line corner of the addition. This system permits an accurate positioning on the different control points without any lens marking. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it has a user friendly interface permitting an operator to learn how to perform the complete lens control (far view, prism reference point, near view, thickness, shape, etc.) with little training required. Minimal training required Very high measurement speed Flexibility (configurable procedures, easy to adapt, any toleran
Request for a quoteAUTOMATION & ROBOTICS (A&R)
Belgium
The Dual LensMapper, integrated in this unit, gives a mapping of the prescription lens (freeform or conventional) and calculates FOA optical power at the reference points (FV, NV). For the freeforms, it compares the expected design to the real lens and displays an error map. A Go/NoGo decision is made, based on the error map and the list of criteria defined by the lab. Because the A&R AutoMapper is task specific, and the system has a small footprint, you can easily integrate it into the lab, either directly after the surfacing or in the final control (also suitable for checking the cut lenses). The AutoMapper is an excellent investment for a modern lab with a rapid payback! 100 % production control just after surfacing --> direct feedback on production* control of the cut lens - in case of remote edging Non contact measurement Correction of eventual R/L inversion Integrated Dual LensMapper : measurement of free form and conventional progressive lenses Control of power, cyl.
Request for a quoteAUTOMATION & ROBOTICS (A&R)
Belgium
The ProMapper is the A&R table-top solution to provide state-of-the-art optical inspection according to the industry standards (ISO/ANSI), totally independent from the operator. In addition, it supplies freeform surface evaluation based on the A&R Error Map technology, making sure that no surface defect is shipped to the customer. Based on the Error Map, surface quality features like the GMC (Global Mapping Criteria) are evaluated and constitute extremely relevant inspection data for process control applications (Statistical Process Control).
Request for a quoteTELEDYNE ICM
Belgium
Specifically developed for the CPSERIES, the POWERBOX control unit does not merely represent a minor component of the new system. It is actually one of the best components! ICM has designed the first ever ‘Plug & Play’ control unit for portable X-Ray generators. This outstanding innovation features two graphic Vacuum Fluorescent Displays as well as MIL-DTL 26482 connectors. Despite its light weight, it is robust and provides a multifunctional position handle as well as a highly intuitive menu. Furthermore, the POWERBOX is shockproof, safe and reliable. And this even applies to harsh, cold, warm and dusty environments. FLEXIBILITY & ROBUSTNESS Its broader power range (from 90V to 264 VAC) voltage selector ensures that this small yet robust control unit can operate from practically any main power network worldwide. Furthermore, its 0.99 power factor means that it can operate with the most commonly used sets that are available on the market.
Request for a quoteTELEDYNE ICM
Belgium
The CCU186 control unit for crawlers possesses a distinct advantage compared to existing products. In fact, all of the performances that are usually achieved with standard control units are now available in the crawler configuration. Automatic slow preheating, the progressive rise in voltage with each exposure, as well as a selection of set values are all included in the CCU186. As the CCU186 has been entirely fitted with industrial electronic components, it is perfectly suited to the often extreme conditions of automatic intra-tube control campaigns. GENERATORS All of the generators in the SITEX crawler range are automatically identified and controlled by the CCU186: the interchangeability is total and this can be instantly implemented on-site. Moreover, thanks to a conversion kit, these generators will operate in perfect sync with the SCU286 standard control unit.
Request for a quoteARODO - PREMIUM POWDER PACKAGING
Belgium
We equip all new machines with a PLC controller and internet connection, enabling our support staff to view the control panel of your machine via remote access. This way we can analyze and adjust the software remotely without a problem. We visually inspect the mechanics of the machine by web cam. Together with you, we're taking major steps toward Industry 4.0.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
TRAPChecker is an ultrasound solution designed to assess the condition of steam traps and valves. Focused Inefficient steam systems waste energy and impact product quality. TRAPChecker is an ultrasound solution focused on finding failed steam traps. It works on every style of trap and failure mode. Simple TRAPChecker is so easy to use. Simply open the box, connect the sensor, and hear the difference between a good and bad steam trap. Its vibrant colour display offers repeatable, accurate, digital measurements. Affordable As much as 40% of your steam traps could be operating in a failed state. The low entry cost of TRAPChecker and the high cost of energy, could see your investment recovered the first time you use it. The TRAPChecker detects internal turbulence by defective steam traps and passing valves. Designed to work with SDT’s RS2 Needle Contact Sensor.
Request for a quoteALX SYSTEM
Belgium
BORDER CONTROL The best way to warn against intrusion Home Border Control BORDER CONTROL The best way to warn against intrusion Context Governments are facing new threats related to the border controls. The need to secure and control country immigration is more important than ever. Today, several processes are pursuing this objective. Their high cost and requirements in term of human resources make them slow to deploy. Actual situation There are teams deallocated from their usual tasks or taken out of reserve to locally be deployed in case of emergencies, with the risk of being under numbered if multiple emergencies happened. Our solution Through the ALX system, multiple inputs can be configured to centralize and manage information flow First, drones can be deployed and managed automatically without intervention of an operator. Secondly, cameras and other equipment can be connected to the system to be processed by the Artificial Intelligence engine, for pattern detection, facial re
Request for a quoteMINEBEA INTEC BENELUX
Belgium
The freefall metal detection system Vistus ensures the reliable inspection and removal of metallic foreign bodies from any kind of food products in powder or granule form that is transported with the use of gravity through a pipe, e.g. milk powder, wheat, nuts or cornflakes. - Minimum installation height for easy integration into any application - Cost effective control of up to four search coils via one terminal - True In-Process Validation. This functionality guarantees correct performance testing
Request for a quoteCLIPPARD EUROPE SA
Belgium
Pressure Gauge, Stud Mount, 1/16" NPT, 0 to 30 psig See Catalog: Page 168
Request for a quoteCLIPPARD EUROPE SA
Belgium
Pressure Gauge, Stud Mount, 1/4” NPT, 0 to 60 psig See Catalog: Page 168
Request for a quoteCLIPPARD EUROPE SA
Belgium
Pressure Gauge, Stud Mount, 1/4” NPT, 0 to 30 psig See Catalog: Page 168
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CLIPPARD EUROPE SA
Belgium
Pressure Gauge, Stud Mount, 1/8” NPT, 0 to 60 psig See Catalog: Page 168
Request for a quoteCLIPPARD EUROPE SA
Belgium
Pressure Gauge, Stud Mount, 1/8” NPT, 0 to 30 psig See Catalog: Page 168
Request for a quoteCLIPPARD EUROPE SA
Belgium
Pressure Gauge, Stud Mount, 1/8” NPT, 0 to 160 psig See Catalog: Page 168
Request for a quoteCLIPPARD EUROPE SA
Belgium
Pressure Gauge, Stud Mount, 1/16" NPT, 0 to 60 psig See Catalog: Page 168
Request for a quoteCLIPPARD EUROPE SA
Belgium
Pressure Gauge, Stud Mount, 1/16" NPT, 0 to 160 psig See Catalog: Page 168
Request for a quoteSENTERA HVAC CONTROLS
Belgium
This control unit has two 0-10 Volt outputs to regulate the EC fans. Via the 2 tacho inputs you can directly monitor the status of the fans and their speed, if tacho signals are available on the fans. HVAC sensors or potentiometers can be connected to the unit, via Modbus RTU communication or 2 analogue inputs. The built-in 24 VDC power supply can feed the external sensors or potentiometers. The controller itself needs a supply voltage between 85 - 305 VAC. Application specific firmware is needed for the unit to function. This firmware can be downloaded via Senteraweb, our online HVAC portal, where we already made a limited number of specific firmware version available, used in typical HVAC applications like destratification. The only thing that needs to be done is to select the appropriate functionality on the solution page of our website and download the firmware. No additional programming is required. TCMF8 is also available - for AC fan speed control.
Request for a quoteSPRAYSTREAM
Belgium
The Spraystream 35i Selfsupporting is a dust suppression machine that generates a consistent stream of microdroplets to capture airborne dust particles and to prevent the escape of fugitive dust. This type of unit is an autonomous misting cannon available in mono- and 3-phase. This misting cannon is very suitable for demolition works where water or electricity is not available. This unit is compact and easily transported.
Request for a quoteSPRAYSTREAM
Belgium
The Spraystream 15i Trolley is a dust suppression machine that generates a consistent stream of microdroplets to capture airborne dust particles and to prevent the escape of fugitive dust. This misting cannon is mainly used for dust- and odoursuppression in closed spaces. As a result of the compact form and wheels this dust suppression machine is easily moved and very versatile. The cannon is also available without trolley.
Request for a quoteSPRAYSTREAM
Belgium
The Spraystream 50i – 60i – 70i is a dust suppression machine that generates a consistent stream of microdroplets to capture airborne dust particles and to prevent the escape of fugitive dust. This type belongs to the larger range of misting cannons and is mainly used for outdoor misting. The machine is available mobile but can also be mounted. This type is very suitable for demolition work. It can be used for dust- or odoursuppression.
Request for a quoteResults for
Controller - Import exportNumber of results
28 ProductsCountries
Company type