Control module - Import export

AM-OUT2R is an addressable module used to control fire automation equipment in the Tiras PRIME A system. Connects to the addressable interface and adds 2 relays 10A/230V, capable of switching the voltage of both direct and alternating current.

— Congrav® CB-E installed in control box or cabinet — Supply voltage: 24VDC — control software for discontinuous dosing of gravimetric dosing devices — Operation on the Brabender fieldbus and master computer — Serial drive controller — Serial load cell — Digital signals — Integrated bus connector Operation: — Congrav® OP16-E — Congrav® OP6-E — Congrav® OP1-S

— Connection via the Brabender fieldbus * Host computer interfaces — A maximum of 6 components — Operation of CM-E, CB-E, CB-S

— Compact component operation — Connection via a separate RS485 interface — Maximum 1 component — Operation of CM-E, CB-E — 5,7“ Color-Touch-Display

Continuous selfsupervision. Vacuum circuit breakers equipped with the CM16 control module continuously monitors control, switching modules, functional wiring and auxiliary power supply quality. CM16 eliminates the necessity of additional trip and close coils, charging mechanisms and all related wiring supervision. The whole trip and close circuit supervision comes in single package with any Tavrida Electric VCB. CM16 allows the user to forget about scheduled trip and close wiring inspections as in the event of malfunction corresponding notification will be sent to the operator using one of the inbuilt output relays and indicated by inbuilt in CM LEDs. Low power consumption. Vacuum circuit breakers equipped with the CM16 control module need less than 42 W in charging mode – just 10% of what the best alternatives available on the market need!

The universal two-point controller is suitable for various applications due its easy handling and robust construction. However you can also use all customary industrial probes with current or voltage output with this unit.

Format 96 x 96 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 48 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 96 mm, portrait Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

The Kuhnke CIO compact I / O connects various input and output signals in a compact housing for the DIN rail. The process data are made available via the CANopen interface according to the device profile CiA 401 of the higher-level control system. The robust design makes it suitable for use in machine and apparatus construction.;Compact control cabinet module; integrierte I/Os: 16DI/16DO/4AI-I/4AI-U/4AO-I/4AO-U/6Pt100/2Thermo; CANopen fieldbus interface

The innovative recuperation module from CIC acts as an energy-saving valve and control module directly in the pneumatic circuit. Functionality : It is installed directly on the consumer - e.g. on the pneumatic cylinder or in the pneumatic control circuit. The recuperation valve with its integrated control electronics measures and regulates the air consumption and feeds used compressed air back into the working cycle for reuse. Advantages : Reduction of compressed air consumption by up to 80%. Increase in efficiency of the plant. Smart monitoring and diagnostics of the pneumatic system with numerous evaluation options and control in line with Industry 4.0. Detection of leaks and irregularities. Delivery for predictive maintenance data. Avoidance of downtimes. Simple control software and wireless transfer from PC.

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and Fieldbus controller can be integrated into any existing setup. The Fieldbus controller delivers all signals exactly where they are needed, to be combined, checked and linked. With the available Fieldbus interfaces, you are flexible, perfectly connected and you save time, costs and other resources when linking to and integrating into existing systems. Due to the integrated measuring input, the use of a Fieldbus controller module is sufficient for single-channel applications. For multi-channel applications, the system can be expanded to up to 9 measuring channels. Up to 8 bus-compatible model 9250 instrumentation amplifiers can be cascaded on the model 9251 Fieldbus controller.

The servo system + torque module controls the capping head, and the cap tightness is freely set. 2. The whole machine is made of 304 stainless steel material without any dead corner. 3. The cap feeding system is adapt Cap elevator which can storage around 1000caps at a time. 4. For different size of bottle and cap, need adjust no need changeover parts excluding the capping head. 5. Avoid Liquid Shakes Out—Bottles no need to stop for capping 6. Wide Application— fast switching for various caps 7. High success rate cap loading—pick & place capping

The PC-based software Batch-PMS enables the operation, monitoring and control of batch-oriented and recipe-based production processes. The integrated control system makes it easy to automate weighing and process batch applications. The software Batch-PMS can be easily integrated into existing network and system infrastructures of various industries. It includes modules for process control, production management, recipe management, data management and many further options. Your benefits: — Simple and modular operating concept including multi-user operation — Easy integration into existing network and system infrastructures — Outstanding connectivity — High data safety including integrated backup functionality

control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.

The Kuhnke FIO Controller 116 is a PLC based on i.MX6 with integrated CODESYS PLC. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events. As far as mechanic properties and form factor are concerned, the controller matches the FIO I/O modules, which can be attached directly to form a mechanically and electrically homogenous unit. Using an additional extender module also the control of remote EtherCAT slaves is possible. It can be easily integrated by the number of interfaces (Industrial Ethernet, RS232, CAN) and supported systems into existing control concepts. ; Fanless ARM processor technology; To be extended with FIO modules; CODESYS V3 with EtherCAT®; Optional: CODESYS SoftMotion

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters. The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets.

JERRICAN provides the electrical autonomy needed to keep all types of electrical equipment running smoothly: computers, printers, terminals, industrial equipment, control equipment, etc. Fitted with intelligent rack-mountable lithium packs (individually rechargeable) and a control module, the JERRICAN stand-alone power supply unit provides unlimited power: operation possible 24/7 without interruption. It integrates electrical storage, energy conversion, interfacing and multiplexed control functions in a complete, secure, flexible and easy-to-use system.

According to ISO 1167 , ASTM D1598 and ASTM D 1599 , European pump , sensors and valves, 19inch display, report out in WORD, manual charge and discharge, automatic pressure control, pressure rate control, water circulation system, digital temperature controller,Airless system • maximum accuracy, a long service life and a user-friendly system, combined with flexibility • High-precision pressure regulation, selectively regulated input pressure in each Line • All metal components that come in contact with the medium is brass ans SS304 • Quick system calibration easily by the operator and calibration data saved in the controller modules • Convenient operation, evaluation of results and clear visualization via Labview and windows based software • Operator access to all important settings from the front panel • Each station can be individually isolated from the supply pressure for service purposes • PLC based control of the pressure channels • Pressure gauge for checking each line actual pre

maximum accuracy, a long service life and a userfriendly system, combined with flexibility Highprecision pressure regulation, selectively regulated input pressure in each Line All metal components that come in contact with the medium is brass ans SS304 Quick system calibration easily by the operator and calibration data saved in the controller modules Convenient operation, evaluation of results and clear visualization via Labview and windows based software Operator access to all important settings from the front panel Each station can be individually isolated from the supply pressure for service purposes PLC based control of the pressure channels Pressure gauge for checking each line actual pressure

The valve assures maximum water level into tanks and reservoirs and avoids overflow. The valve operate by means of a modulating float, mounted on tank, able to regulate gradual opening of the valve when water level goes down from maximum.

GM8802S-C is a compact check weigher control module with the DIN rail mount installation method. It has an OLED display. The WEINVIEW 7-inch or 10-inch touch screen is the optional selection. It is suitable for weight checking or sorting in the production process of various industries, such as logistics, chemical, food, pharmaceutical, and electronics industries, and so on.

The integrat 80 is used for the modular temperature control with water up to 140°C in the basic version with up to six temperature control circuits to be operated completely independently of each other. The basic version can be expanded with extension columns and up to 24 temperature control modules. As an option, the temperature control circuits can be extended with the 4-way distributor vtc with flow and temperature measurement. Thus, a maximum of 96 temperature control circuits can be monitored with the vtc 4-way distribution system. In conjunction with the standard heating control system used as standard, a homogeneous temperature profile on the mould cavity surface is achieved in an extremely energy-efficient manner, as well as with constant cooling by using a motor valve. As an option, the pumps can also be operated with frequency control unit. This improves the procedural results and contributes to energy savings.

FXE-M electro-permanent load lifting magnet modules can be combined with MCF control units to form modular load lifting systems. For example, a single FXE-M module with an MCF 1-channel control unit can be used on the crane of a flame-cutting machine, or 4 FXE-M modules, controlled together or individually by an MCF 4-channel control unit, can operate in a fully automatic sectional steel plant. In use on cranes, manipulators, conveyors and robots, FXE-M modules have proven themselves thousands of times over. FXE-M modules are manufactured using monoblock technology and are extremely stable. As with the other products in the FXE series, a choice can be made between different pole types in order to use the appropriate magnet module depending on the load, dimensions and surface.

The FT-NIR spectrometer MPA III is designed to meet the demands of today’s and tomorrow’s quality control. It combines outstanding flexibility and high performance with an easy-to-operate interface. • Full line of sample presentation options for all NIR applications • Software-controlled module selection, no manual exchange required/ • Low cost of ownership thanks to high quality components with long life time • Easy calibration transfer to other Bruker lab, at-line or process spectrometers • Fully cGMP and 21 CFR Part 11 compliant, supports validation according to USP and Ph.Eur 2.2.40

Corrosion resistant, light Aluminium heat exchanger Efficiency upto %107 Five different capacities for Ongas 300 (70, 95, 125, 155, 190* kW) Nine different capacities for Ongas 600 from 230 kW to 850* kW Cascade system with 16 boilers Workıng pressure 6 bar High combustion performance with low exhaust emission Different zone controls with Siemens control panel 17 modulation ration Compability with Open Therm ve BUS comunication systems Low noise level Easy to use and maintenance

IAI's new controller series: R-Unit R-Unit is the new generation of controllers that are coupled via module connections and are modularly interchangeable. These include the RSEL program controller for connecting up to 8 actuators (in combination with the REC EC control up to 16 actuators), the RCON position controller for up to 16 electric cylinders and the REC EC controller for motion control of up to 16 EleCylinder axes. Common to all of them are the linkable control units with identical connections, which allow a free selection and combination of connected electric actuators and their control methods. Mixed control of electric cylinders with 24 volt and 230 volt motors is also easily feasible.

Induction magnetometer allows to measure magnetic field isotherms of magnetization (magnetization versus magnetic field (M(H) dependences) in the fields up to 2 T and in the temperature interval from 80 to 370 K. Magnetization is measured by induction method. Specification: - temperature interval — from 80 to 370 К, - magnetic field interval — from 0,02 to 2 Т, - relative measurement accuracy of magnetization - 2 %, - maximal sample dimensions - Ø1.5 × 3.7 mm. Magnetometer (its measuring part) consists of the measuring insert, electronic module and control and data acquisition program and can be used together with the magnetocaloric measuring setup (which includes permanent magnet adjustable magnetic field source, liquid nitrogen cryostat, temperature controller, 2 digital voltmeters, control computer with corresponding interface and control boards).