Control module - Import export

— Congrav® CB-E installed in control box or cabinet — Supply voltage: 24VDC — control software for discontinuous dosing of gravimetric dosing devices — Operation on the Brabender fieldbus and master computer — Serial drive controller — Serial load cell — Digital signals — Integrated bus connector Operation: — Congrav® OP16-E — Congrav® OP6-E — Congrav® OP1-S

— Connection via the Brabender fieldbus * Host computer interfaces — A maximum of 6 components — Operation of CM-E, CB-E, CB-S

— Compact component operation — Connection via a separate RS485 interface — Maximum 1 component — Operation of CM-E, CB-E — 5,7“ Color-Touch-Display

Continuous selfsupervision. Vacuum circuit breakers equipped with the CM16 control module continuously monitors control, switching modules, functional wiring and auxiliary power supply quality. CM16 eliminates the necessity of additional trip and close coils, charging mechanisms and all related wiring supervision. The whole trip and close circuit supervision comes in single package with any Tavrida Electric VCB. CM16 allows the user to forget about scheduled trip and close wiring inspections as in the event of malfunction corresponding notification will be sent to the operator using one of the inbuilt output relays and indicated by inbuilt in CM LEDs. Low power consumption. Vacuum circuit breakers equipped with the CM16 control module need less than 42 W in charging mode – just 10% of what the best alternatives available on the market need!

The universal two-point controller is suitable for various applications due its easy handling and robust construction. However you can also use all customary industrial probes with current or voltage output with this unit.

Format 96 x 96 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 48 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 96 mm, portrait Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

The Kuhnke CIO compact I / O connects various input and output signals in a compact housing for the DIN rail. The process data are made available via the CANopen interface according to the device profile CiA 401 of the higher-level control system. The robust design makes it suitable for use in machine and apparatus construction.;Compact control cabinet module; integrierte I/Os: 16DI/16DO/4AI-I/4AI-U/4AO-I/4AO-U/6Pt100/2Thermo; CANopen fieldbus interface

The innovative recuperation module from CIC acts as an energy-saving valve and control module directly in the pneumatic circuit. Functionality : It is installed directly on the consumer - e.g. on the pneumatic cylinder or in the pneumatic control circuit. The recuperation valve with its integrated control electronics measures and regulates the air consumption and feeds used compressed air back into the working cycle for reuse. Advantages : Reduction of compressed air consumption by up to 80%. Increase in efficiency of the plant. Smart monitoring and diagnostics of the pneumatic system with numerous evaluation options and control in line with Industry 4.0. Detection of leaks and irregularities. Delivery for predictive maintenance data. Avoidance of downtimes. Simple control software and wireless transfer from PC.

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and Fieldbus controller can be integrated into any existing setup. The Fieldbus controller delivers all signals exactly where they are needed, to be combined, checked and linked. With the available Fieldbus interfaces, you are flexible, perfectly connected and you save time, costs and other resources when linking to and integrating into existing systems. Due to the integrated measuring input, the use of a Fieldbus controller module is sufficient for single-channel applications. For multi-channel applications, the system can be expanded to up to 9 measuring channels. Up to 8 bus-compatible model 9250 instrumentation amplifiers can be cascaded on the model 9251 Fieldbus controller.

The PC-based software Batch-PMS enables the operation, monitoring and control of batch-oriented and recipe-based production processes. The integrated control system makes it easy to automate weighing and process batch applications. The software Batch-PMS can be easily integrated into existing network and system infrastructures of various industries. It includes modules for process control, production management, recipe management, data management and many further options. Your benefits: — Simple and modular operating concept including multi-user operation — Easy integration into existing network and system infrastructures — Outstanding connectivity — High data safety including integrated backup functionality

control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.

The Kuhnke FIO Controller 116 is a PLC based on i.MX6 with integrated CODESYS PLC. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events. As far as mechanic properties and form factor are concerned, the controller matches the FIO I/O modules, which can be attached directly to form a mechanically and electrically homogenous unit. Using an additional extender module also the control of remote EtherCAT slaves is possible. It can be easily integrated by the number of interfaces (Industrial Ethernet, RS232, CAN) and supported systems into existing control concepts. ; Fanless ARM processor technology; To be extended with FIO modules; CODESYS V3 with EtherCAT®; Optional: CODESYS SoftMotion

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters. The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets.

Equalize airflow pressure within speaker chambers Our POREX® porous flow modulators provide precise airflow control between speaker chambers and to the exterior of the unit, thereby reducing air pulses caused by speaker movement. Allowing a freestanding speaker system to breathe freely during temperature fluctuations, our flow modulators equalize pressure within the unit. Designed for precise airflow control, our flow modulators: Protect sensitive electronic and acoustic components–POREX® porous materials repel dust, water, sweat, oils and other liquids from entering the enclosure. Can be custom developed in three-dimensional shapes for increased design flexibility. request sample ask an engineer

The integrat 80 is used for the modular temperature control with water up to 140°C in the basic version with up to six temperature control circuits to be operated completely independently of each other. The basic version can be expanded with extension columns and up to 24 temperature control modules. As an option, the temperature control circuits can be extended with the 4-way distributor vtc with flow and temperature measurement. Thus, a maximum of 96 temperature control circuits can be monitored with the vtc 4-way distribution system. In conjunction with the standard heating control system used as standard, a homogeneous temperature profile on the mould cavity surface is achieved in an extremely energy-efficient manner, as well as with constant cooling by using a motor valve. As an option, the pumps can also be operated with frequency control unit. This improves the procedural results and contributes to energy savings.

The FT-NIR spectrometer MPA III is designed to meet the demands of today’s and tomorrow’s quality control. It combines outstanding flexibility and high performance with an easy-to-operate interface. • Full line of sample presentation options for all NIR applications • Software-controlled module selection, no manual exchange required/ • Low cost of ownership thanks to high quality components with long life time • Easy calibration transfer to other Bruker lab, at-line or process spectrometers • Fully cGMP and 21 CFR Part 11 compliant, supports validation according to USP and Ph.Eur 2.2.40

IAI's new controller series: R-Unit R-Unit is the new generation of controllers that are coupled via module connections and are modularly interchangeable. These include the RSEL program controller for connecting up to 8 actuators (in combination with the REC EC control up to 16 actuators), the RCON position controller for up to 16 electric cylinders and the REC EC controller for motion control of up to 16 EleCylinder axes. Common to all of them are the linkable control units with identical connections, which allow a free selection and combination of connected electric actuators and their control methods. Mixed control of electric cylinders with 24 volt and 230 volt motors is also easily feasible.

Compur Statox 502 Control - and Common Alarm Module The All – Rounder in Gas Detection No matter if you want to detect toxic or combustible gases: This control module works with any sensor head. It provides the power supply and processes the signal. Three highly rated relays and a 4 – 20 mA output are the interfaces to peripheral instrumentation. Potential front ends may be the Statox 501 or Statox 505 transmitters with electrochemical or infrared sensors, or sensor heads with a Wheatstone bridge signal such as Statox 501 PID, catalytic or the Statox 501 LC and MC series with infrared sensors. Just by the push of a button you can program the module to handle 4 – 20 mA sink or source. Even the bridge voltage can be set to any value between 2 and 5.2 V, it even works with sensor heads of other manufacturers. So there is no restriction at all when selecting the appropriate sensor head for you application. With its two “sense” lines it can even compensate the voltage drop in the cable for very remote sensor heads or if there are extreme temperature variations. For maximum flexibility the measuring range is user programmable. You can also select the unit, no matter if it is ppb, ppm, % LEL or % volume. Easy installation The control module is mounted on a standard DIN rail. With an optional power rail you can interface the 24 V DC power and the alarm signals. This way you can program one of the modules to operate as a common alarm module. Even this function can be programmed just by push button. The application of a control module as a common alarm module is a very useful feature. It displays when any of the modules goes into Alarm 1, 2 or system alarm, and controls peripheral alarm devices. All electrical contacts are located easily accessible on the front side. The terminals for alarm signals, analog output, sensor head connection run into 6 pluggable terminal blocks. This makes not only the first installation quick and easy, but also any service event or system modification. A module can easily be removed out of its row, without interrupting its neighbors or disconnecting wires. Intuitive User Interface You want a gas detection system that needs little or no attention. No matter if setting the initial parameters or performing scheduled calibrations or proof tests: The handling shall be safe, quick and easy. The password - protected Statox 502 software structure is so clear that most menu items are self - explanatory. The “Reset” button brings you time back into the measuring mode at any time. Even if you have to interrupt your work and forget to reset, the watchdog function returns the system into the measuring mode, if no button has been pushed for a while. Functional safety paired with utmost system flexibility The Statox 502 complies with the standards DIN EN 61508 and 61511 functional safety, level SIL 2. In context with the HRC or ARE sensor heads you can create a complete gas detection system for combustible gases complying with SIL 2 standard. In larger installations signals of gas detectors often run into SIL certified process control systems, in smaller plants there is a need for a control module complying with SIL requirements. As any combination sensor head / control module forms a complete gas detection system, this system closes the gap. It is expandable without limits, and there is no restriction to the mix of sensor heads connected. Connecting other front ends The versatility of the Statox 502 does not end with gas detection. You can connect any front end providing a 4 – 20 mA analog signal or a Wheatstone bridge signal. So you can create your own compact control system for a variety of sensors with just one type control device. Accessories Useful accessories such as calibration adapters, intrinsically safe repeaters, Power supplies etc. complete the system. 205 VAC, 8 A min. make or break power >/= 12 V, 10 mA, contakte silver / nickel

Fixed gas detection system for oxygen, toxic and combustible gases This DIN – rail mounted modern control module saves space, money and installation time. One safe controller for all gases: Any combination of a sensor head plus control module is a complete gas detection system. This makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum cost and labor. Programs for all gases and measuring ranges are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button. Easy to install and easy to use The controll modules as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the module. Each Statox 501 control module has three relays for alarm 1 and 2 and system failure (115 / 230 V AC / 2 A). An analog output for recorder or process control systems is also included. Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the Statox 501! Just follow the menu! If intrinsically safe transmitters are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters. 24 V power supply as well as the signals for the common alarm module are transmitted via bus from one module to the next. All terminals are easily accessible from the front. Field proven sensors for reliable gas detection Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The remote sensor heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display. Combustible gases can be detected with a variety of catalytic beads (pellistors) or infrared technology. The sensor heads are certified "Ex d" or "Ex de" and can be connected directly to the control module, even if they are to be used in classified areas. The control module can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your individual application needs. Easy maintenance saves time and money Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas. Accessories A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a 19”-carrier, ensure an easy professional installation. -20 - +60 °C

The system consists of an intrinsically safe sensor head communicating with a control module. Up to 9 control modules can be located in a 19”-rack where each combination sensor head - control module works as an independent gas detection system. Therefore the total system can be expanded without limitation. No new units sold anymore. Compur Monitors does support all existing systems with spare parts, consumables and service now and in future! 0-1,5/0-15 ppm Diagnostic unit

• Closed luminaire body with cover • Direct light component with edge light and light-guide technology for homogenous light exit • Connection to DALI light management systems • Biodynamic light LUM CONNECT VTL (Accessories: Controller NET Module with SD card required) • Easy mounting, operating devices integrated into the luminaire • Retrofittable with TALK module for luminaires with PIR sensor

Statox 501 PID - the Allrounder PIDs (Photo – Ionisation – Detectors) detect VOCs (Volatile Organic Compounds) in the ppm range, which other sensor types are unable to monitor, like solvents and fuels. A PID sensor uses high energy ultra violet light radiation to break gas molecules into radicals, which are discharged while passing a condenser. The discharge current increases proportional to the number of molecules, i. e. the gas concentration. The standard Statox 501 PID will detect all substances with a ionization energy below 10,6 eV PIDs are normally calibrated with Isobutene. Other gases will be detected with different sensitivity. These so - called response factors must be multiplied with the displayed concentration when adjusting span. Compur Monitors will adjust your Statox 501 PID individually to your application ex works. A magnetic pin gives access to simple parameter setting and calibration menu. A multi - color LED signalises the status of the system. The Statox 501 PID voltage output signal is similar the the signal of a catalytic sensor. The Statox 501 control module displays the measured value and provides an analog output and 3 powerful relay outputs for alarm devices or pcs. Technical Data Material: Housing Interface Cast aluminum, Stainless steel

The DLC pro Lock is a software license that enables a number of features on a specific DLC pro. These allow to control the frequency of a laser for example by using a saturated absorption spectroscopy setup with a reference cell. This most popular example of frequency typically uses a modulation of the laser frequency, a de-modulation (Lock-In) for creation of the error signal and PID regulators for the generation of the error signal. All this may be achieved with a DLC pro control without further electronic modules.

The Fast Analog Linewidth Control (FALC 110) is a module for advanced laser frequency stabilization tasks, such as linewidth reduction and high-bandwidth frequency locking. Due to an optimized circuit layout, the -3 dB bandwidth of the fastest signal path reaches 100 MHz. The Mixing FALC (mFALC) additionally comprises an analog mixer for phase detection, and is designed for fast phase locking of two lasers to an external RF reference.

Our modular control packages are customized to significantly improve your carburizing/carbonitriding operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Carburizing / Carbonitriding control solution for batch furnaces supplied with a PROTHERM universal programmable controller. Optional online carbon and nitrogen diffusion and β-control modules available for even more precise control. FEATURES • Full compliance with AMS 2750, CQI-9, NFPA 86-C, NADCAP* • Precise atmosphere control (carbon potential control) • Furnace temperature control • Quench (oil) temperature control • Alarm notification and processing • Password protected interface • Real time and historical...

The SAV Plus™ is a heavy-duty position control valve that maintains a valve's position based on a desired % output set point. It is designed to work in applications where the control of a process variable (PV) is accomplished using an independent sensor. Perfect for controlling Dew-point, Carbon Potential, etc. The SAV Plus™ incorporates a standard Waukee Flo-Meter scaled to the application requirements and an electronic control valve that modulates flow based on an external signal from a control system. The external signal can be 4-20mA or may be delivered using digital communications. FEATURES • Large LCD display provides vital information such as Valve position, Alarms, and diagnostic messages • Simple and intuitive programming menus • Field programmable engineering units • Standard Modbus TCP for easy integration with control systems • Manual actuation of valve possible • Built-in Web Server for remote access to device • Calibration in state-of-art ISO/IEC 17025:2005...

Our modular control packages are customized to significantly improve your annealing / bright annealing / normalizing operations, meet industry standards requirements and ultimately provide you with precise and reliable process control. We offer compact, fully automatic modules for new installations or retrofits. Each solution consists of a cost-effective module or combination of modules delivered with state-of-the-art equipment and backed by our extensive technological expertise. Annealing / Bright annealing / Normalizing control Solution is supplied with a PROTHERM controller and either an AccuCarb® LTA probe or FurnaceDoctor® FX analyzer or with Protherm ActivePLC™, FurnaceMeter™, AtmoSense™ and UPC oxygen probes for a variety of furnace types. FEATURES • AMS 2750, CQI-9, NFPA 86-C, NADCAP* • Latest achievements in process control • Cost-effective module configurations * depending on the options chosen