Control blocks - Import export

Block control board without the plain or numbered blocks The Block Control Board is also available to purchase individually without the magnetic blocks.

The MBS hydraulic cylinders of the MZR-1019 series are lightweight cylinders where weight is of crucial importance. They were designed for the areas of mobile hydraulics, crane and aerial work platform construction. All cylinders work with low friction and are characterized by a stick-slip-free run. Lift and piston rod overhang are variable selectable. The cylinder connection is via plain bearing bushes. Connections are provided on the valve plate or a control block, which are flanged to the cylinder via welded pipes, in accordance with DIN EN 280. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the...

Kendrion offers for its CODESYS-based controllers a library with blocks for motion control functions according to PLCopen for various drive controllers. The Kuhnke Motion Control library provides a wide range of function blocks for parameterization, positioning and diagnostics of the drive. The blocks are simple and intuitive to use and support in all phases of the workflow e.g. during programming, commissioning, diagnostics and maintenance. The motion task in the control system can thus be programmed simply, quickly and thus economically. A drive with only a few lines of code is put into operation via the corresponding visualization templates. The library supports drive controllers from various well-known companies and supplies a wide range of standardized functions. The communication between the drives and the control can take place via various fieldbuses such as EtherCAT®, CAN, Modbus or RS-485. Features

What is a Hydraulic Manifold Blocks? Hydraulic manifold blocks is a hydraulic manifold block made of carbon steel or alloy aluminum. There are many chambers are intergraded inside the hydraulic manifold to meet various requirements in hydraulic systems or install hydraulic valve for modular valves, cartridge valves threaded installation . Hydraulic valve manifold is available to control the fluid direction, hydraulic pressure with hose fittings or adjusting flow rate with its designed chambers and valves. Hydraulic manifold block is easily to maintain, lower cost and standard replacement. Why Our Customers Choose FRIMA hydraulic Manifold blocks: We provide a wild range of manifold blocks for standard of CETOP, NFPF, DIN2430 & ISO4401 or Customized Design available. 100% high quality materials, heavy-duty carbon steel (Pressure Up to Max. 60Mpa(600bar, 8700psi) ) or alloy aluminum (Pressure Up to Max. 21Mpa(2100bar, 3045psi) ) .

B-DRY BM Medical heatless regeneration adsorption dryers have been designed for drying and purification of compressed air for medical applications where European Pharmacopoeia is applicable. Operation of the dryer requires two columns operated alternately. Adsorption takes place under pressure in the first column while the second column regenerates with a portion of already dried compressed air at ambient pressure. Dryers consist of an upper and lower control block, controller with LED display and two columns filled with desiccant. The third column is filled with a combination of special functional materials which reduce the concentration of certain substances down to the acceptable level. Springs in the columns make sure that the desiccant beads will not move during operation. Proven robust design enables efficient and reliable operation, fast installation and simple maintenance.

Our installation systems with integrated safety control block are suitable for installation in pressurized lines. The integrated safety control block consists of a volume flow reduction unit and a pressure reducing valve. These two components make this system become a cost-effective, very safe, and technically fast operating solution. The mounting to existing systems and machines can be completed in just a few minutes, because there are only 2 connections and mounting material is also part of the system.

Our C 1000 ES cleans oil in the main flow with the purity of a partial-flow filter. The partial-flow filtration of technical oils is the most effective and cleanest way of filtration. An ordinary main flow filter cannot remove very fine particles from the oil for kinematic and dynamic reasons, because it is exposed to the high pressure of the system. In order to combine the benefit of the main flow filter – mounting in the main flow – with our excellent filter results, we have developed the installation system C 1000 ES. By use of a control block which consists (amongst others) of a pressure reducing valve and a volume flow control, we filter in the main flow with the results, which are even accepted in space travel since many years. Also available in stainless steel or plastic coating Ultra fine filtration in the main flow up to 1 µm particle size System pressure possible up to 360 bar Constructively simple to integrate, because the control block is installed on the housing

Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 18.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

Electro Permanent Magnetic Beam with integrated Battery Group. 10 Electro Permanent Magnetic modules, elastically suspended for perfect adaptation on the Steel Plate. Safety Factor of 3. For lifting of Steelplates with max. length of 12.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

Electro Permanent Magnetic Beam with integrated Battery Group. 8 Electro Permanent Magnetic modules, elastically suspended for perfect adaptation on the Steel Plate. Safety Factor of 3. For lifting of Steelplates with max. length of 9.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

Electro Permanent Magnetic Beam with integrated Battery Group. 6 Electro Permanent Magnetic modules, elastically suspended for perfect adaptation on the Steel Plate. Safety Factor of 3. For lifting of Steelplates with max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air. Safety Factor of 3.

Keytracker’s Magnetic Block Systems are a simple key storage and vehicle identification solution, ideally suited to vehicle repair outlets, easily identifying the vehicle in a crowded yard or storage area The Block System includes: 1 Magnetic Block Control Board and 20 coloured and numbered Magnetic Blocks

The easiest and most cost effective way to get started or add to an existing Keytracker solution is with the Complete Block and Keytag System. Includes: 1 x Magnetic Block Control Board 1 x Keytag Hook Board 20 x coloured Magnetic Blocks Numbered 20 x coloured Keytags Numbered (choose the number sequence required from either: 1-20, 21-40, 61-80 or 81-100).

Overview of the main motor grab features for which we offer spare parts: Grab shells All bearings Hydraulic cylinders Control blocks Hydraulic pumps Motors Suspension

Thanks to its flexible operating concept – workshop-oriented programmability with HEIDENHAIN conversational programming or external programming – and its scope of features, it is especially suited for use on universal milling, drilling and boring machines for series and single-part production tool and die making manufacture of machines research and development prototype production and testing facilities repair departments educational and training institutes The TFT 15-inch color monitor shows a clear overview of all relevant information for programming, operating and inspecting the machine tool and control such as program blocks, comments and error messages. More information is provided through graphic support during program entry, test run and actual machining. The selectable split-screen display shows the part program blocks in one half of the screen and the graphics or the status display in the other half.

The fully ULcertified positioning system from Lenord+Bauer consists of three individual elements that can be flexibly combined as required positioning drives by the name of SeGMo, the decentralised SeGMoBox control unit for flexible fieldbus integration and the associated hybrid cable solution, including connectors, that is suitable for use with drag chains. The SeGMo drives are complete mechatronic systems with a batteryless multiturn absolute rotary encoder, gear and motor as well as integrated power and control electronics. Lenord+Bauer also offers these for standalone use. With nominal torques of up to 15 Nm, they cover the capacity range typical for secondary axes. Integrate the drives directly into your control system with the function blocks. Alternatively, you can automate up to 17 secondary axes using the decentral SeGMoBox. The box handles the power management for the connected drives and concentrates the interaction with the system control.

design, manufacture and assembly of hydraulic control blocks in single part and series production

design, manufacture and assembly of hydraulic control blocks in single part and series production

design, manufacture and assembly of hydraulic control blocks in single part and series production

design, manufacture and assembly of hydraulic control blocks in single part and series production

design, manufacture and assembly of hydraulic control blocks in single part and series production

design, manufacture and assembly of hydraulic control blocks in single part and series production

Automatic detection and activation management provides 24 hours protection. In addition of fire detection, you can activate the system manually thanks to a special system of manual activation. The most effective agent in fire extinguishing industry. Thanks to high pH formula it extinguishes fire and prevents reignition. Steel cylinders under pressure are always ready to discharge the fire extinguishing agent in case of fire. Pressure transducer on the cylinder of fire extinguishing agent provides visual control. 100 % installed and tested control block ensures safe operation of the input and output functions. Installation will be made without disturbing the workflow of your kitchen due to the flexible pipe configuration. Protective chrome cover protects nozzle from clogging by dirt and grease, providing discharge of gas without interruption. Nozzles’ cover are removing and don’t interrupt the discharge of fire extinguisher.

Line of Machine equipment for the production of wall blocks controlled by PLC automation. Machine with a powerful hydraulic configuration, is able to produce blocks into 140-150 pallets per hour. This kind of Machine produces 12 pieces of 20-th blocks in 1 cycle. The batching plant that provide the Machine by mortar is controlled semi/full automatically that’s up to client. The PARS12 blocks making machine has also the operative and quick mold changing system. It makes the machine ideal for producing different kinds of blocks. General Options Easy to install Easy commissioning and repair Pneumatic and hydraulic cylinders Efficient operation with high productivity Low investment and operating costs Easy to clean Opportunity for long-term work System simplicity Reliable emergency system

-Hydraulic Mini power packs -Hydraulic pumps, -Hydraulic Motors, Orbit Motors -Hydraulic power units and various hydraulic systems -Solenoid, Pilot, Manuel operated hydraulic directional control valves -Hand Valves -Relief, pressure, reducing, speed control valves, check valves, throttle valves -Modular and plate designed valves -Control blocks and hydraulic switch -Hydraulic Cylinders -Oil Coolers #hydraulicsystems #hydrauliccylinders #minipowerpacks #GearPumps #HydraulicMotors #HandValves