Results for
GLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing steel / POM | low-maintenance | With lubrication pockets | DIN 1494 / ISO 3547 POM-MET® is a low-maintenance composite sliding bearing with a POM coating. Initial lubrication is required. Both oil or grease lubrication are possible. Due to the lubricant pockets, relubrication intervals are significantly reduced! Suitable for all sliding movements, good load capacity, robust and resistant to dirt. Suitable for grease or oil lubrication and all kinds of movement, good load capacity, robust and insensible to dirt. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing steel / Special PTFE coated Maintenance-free dry sliding bearing | DIN 1494 / ISO 3547 TEF-MET/P is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, it is very well suited for lubricated applications (e.g. hydraulic oil lubrication). For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding- and wear behaviour, for all types of movement, high load capacity, all-round adaptable. For technical details, please visit the product page on our website!
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing Stainless steel / PTFE coated | Maintenance-free dry sliding bearing | Corrosion resistance | Chemical resistance | DIN 1494 / ISO 3547 NOX-MET® is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear behaviour, high load capacity, shock resistant, chemically resistant against acids and bases (ph-value 0-14), corrosion resistant. For technical details, please visit the product page on our website!
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
MUNICIPAL AND INDUSTRIAL APPLICATIONS WITH CHAMBER VOLUMES FROM 100 TO 7,000 M3 The LIPP UniCentralmix Digester with its central agitator is designed for industrial and municipal applications. The special feature of this tank, in addition to the central agitator, is the roof construction, with a high quality stainless steel diaphragm cover. The flexible LIPP System ensures each digester can be adapted to each individual application and customer requirements. KEY BENEFITS Energy efficient, central agitator Maximum leak tightness Flexible substrate composition High functional safety Stainless steel diaphragm roof without bolts External heating system available Production on site enables quick construction Low investment costs Low maintenance and durable High quality the world over PRODUCT SPECIFICATIONCENTRAL AGITATOR WITH BOLT LESS STAINLESS STEEL DIAPHRAGM ROOF At the heart of the LIPP UniCentralmix is a stainless steel tank (in Verinox) with a digester chamber
Request for a quoteGLT BEARINGS GMBH
Germany
Rolled composite plain bearing | Maintenance-free | Steel / graphite bronze | With embedded solid lubricants GAP-MET®/S is a maintenance-free composite plain bearing. However, oil or grease lubrication is possible. High load capacity and strength, for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance. For technical details, please visit the product page on our website!
Request for a quoteE. DOLD & SÖHNE GMBH & CO. KG
Germany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteE. DOLD & SÖHNE GMBH & CO. KG
Germany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteE. DOLD & SÖHNE GMBH & CO. KG
Germany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteE. DOLD & SÖHNE GMBH & CO. KG
Germany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteE. DOLD & SÖHNE GMBH & CO. KG
Germany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteE. DOLD & SÖHNE GMBH & CO. KG
Germany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteE. DOLD & SÖHNE GMBH & CO. KG
Germany
• EU-Test certificate according to the directive 2006/42/EG, annex IX • For safety applications up to PLe/Category 4 according to EN ISO 13849-1 • Modular and expandable system • Rugged composite version of stainless steel and plastic design • Wireless mechanical safeguarding • Combines the benefits of safety switch, solenoid locking and key transfer in a single system • Easy installation through comprehensive accessories • Protection against lock-in • Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Request for a quoteGLT BEARINGS GMBH
Germany
Rolled composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET/B is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear behaviour, for all types of movement, high load capacity, good corrosion resistance, non-magnetic. For technical details, please visit the product page on our website!
Request for a quoteMIRO GLOVES
Czech Rep.
AntiCut MAX5 this glove is created from a special composite yarn Brinix N5 with steel, polyethylene, polyamide and other ressistant fibres. Retaining fine glove features (feeling in fingers) this glove reaches outstanding values of both abrasion and cut resistence according to EN 388. This glove cannot be practically compared with the Aramid one a similar glove would be produced very hardly. The gloves do not contain any glass fibres, which break to pieces during work! These gloves are particularly suitable for assembly work, handling sheet metal, handling construction materials, etc., where there is a risk of cuts, scratches, and abrasion. Due to its construction, the glove has an excellent grip ability.
Request for a quoteUBIOTEX QUALITY LIFE S.L.
Spain
EFFECTS AND ADVANTAGES Stainless, resistant and maximum security COMPOSITION Stem Circular stainless steel monoblock with slots. Pivot Circular stainless steel monoblock with slots. Hook Stainless steel wire in a single piece. DIMENSIONS 4x4 MANTEINANCE It does not have any maintenance
Request for a quoteUBIOTEX QUALITY LIFE S.L.
Spain
EFFECTS AND ADVANTAGES Stainless, resistant and maximum security COMPOSITION Stem Circular stainless steel monoblock with slots. Pivot Circular stainless steel monoblock with slots. Hook Stainless steel wire in a single piece. DIMENSIONS 4x4 MANTEINANCE It does not have any maintenance
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HANNECARD GROUP
Belgium
As a sleeve manufacturer, Hannecard offers a variety of custom-made sleeves that will enhance the quality of your products.New roller cores in steel, stainless steel, aluminum and composite, available in lengths of up to 12m and weights of 32 tons for an extremely wide range of applications. If you are looking for a new design, our experts will be glad to help. Complete roller design for OEM, engineering offices and end users Engineering Roller maintenance, disassembly, inspection and assembly Packaging: repair and manufacturing of transport crates Corrosion protection
Request for a quoteAMETEK SPECIALTY METAL PRODUCTS
United States
HPM® 455 is a precipitation heat treatable martensitic Stainless Steel. The composition provides a good combination of corrosion resistance and heat treated strength favorable for fatigue applications. The material is well suited for demanding spring devices The alloy has reasonably good forming characteristics in the annealed temper considering that it has a hardness of RC30. A significant radius is useful when bending is necessary in a fabrication. Cold working prior to the precipitation hardening treatment can drive finish strength up to 270,000 PSI (0.2% offset yield strength). The alloy retains a good strength through 800°F (Approx. 70% of room temperature). Resistance to stress – corrosion cracking is optimized by heat treating at 950°F. The overall corrosion resistant to normal atmospheric is equal to SS 430 with no staining. The alloy can be welded by resistance and inert gas shielded techniques. It also is suitable for brazing using a flux when possible.
Request for a quotePENGG KABEL GMBH
Austria
RAILFOOT CABLE, LOOSE TUBE CONSTRUCTION, METAL-FREE, WATERTIGHT, RODENT PROTECTION, ALUMINIUM-PE-COMPOSITE-LAYER SHEATH, STEEL WIRE ARMOURING The fiber-optic railfoot cable is designed for use in telecommunication systems. It can be laid directly on the rail foot or other areas subjected to vibrations and impacts, but is also suitable for fixed laying in cable ducts, conduits or direct burial.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The Sonic Equipment NEXT S7 toolbox is a part of our entry level range of toolboxes. Its compact dimensions, width 80 cm and depth only 51 cm, make it the ideal unit to move around and store anywhere in a workshop. Removable steel worktop with composite inlay 4 shallow and 2 deep drawers 60kg telescopic ball bearing slides Total loading capacity of 400kg
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The Sonic Equipment NEXT S8 is an entry model toolbox, best suited for technicians looking for a basic to intermediate toolset. With its compact design of only 80cm in width and 51cm in depth, this toolbox is the ideal box for moving around a workshop, requiring a smaller storage space. Removable steel worktop with composite inlay 5 shallow and 2 deep drawers 60kg telescopic ball bearing slides Total loading capacity of 400kg
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The Sonic Equipment NEXT S8 is an entry model toolbox, best suited for technicians looking for a basic to intermediate toolset. With its compact design of only 80cm in width and 51cm in depth, this toolbox is the ideal box for moving around a workshop, requiring a smaller storage space. Removable steel worktop with composite inlay 5 shallow and 2 deep drawers 60kg telescopic ball bearing slides Total loading capacity of 400kg
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The Sonic Equipment NEXT S8 is an entry model toolbox, best suited for technicians looking for a basic to intermediate toolset. With its compact design of only 80cm in width and 51cm in depth, this toolbox is the ideal box for moving around a workshop, requiring a smaller storage space. Removable steel worktop with composite inlay 5 shallow and 2 deep drawers 60kg telescopic ball bearing slides Total loading capacity of 400kg
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The Sonic Equipment NEXT S8 is an entry model toolbox, best suited for technicians looking for a basic to intermediate toolset. With its compact design of only 80cm in width and 51cm in depth, this toolbox is the ideal box for moving around a workshop, requiring a smaller storage space. Removable steel worktop with composite inlay 5 shallow and 2 deep drawers 60kg telescopic ball bearing slides Total loading capacity of 400kg
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The Sonic Equipment NEXT S8 is an entry model toolbox, best suited for technicians looking for a basic to intermediate toolset. With its compact design of only 80cm in width and 51cm in depth, this toolbox is the ideal box for moving around a workshop, requiring a smaller storage space. Removable steel worktop with composite inlay 5 shallow and 2 deep drawers 60kg telescopic ball bearing slides Total loading capacity of 400kg
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The Sonic Equipment NEXT S7 toolbox is a part of our entry level range of toolboxes. Its compact dimensions, width 80 cm and depth only 51 cm, make it the ideal unit to move around and store anywhere in a workshop. Removable steel worktop with composite inlay 4 shallow and 2 deep drawers 60kg telescopic ball bearing slides Total loading capacity of 400kg
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The Sonic Equipment NEXT S7 toolbox is a part of our entry level range of toolboxes. Its compact dimensions, width 80 cm and depth only 51 cm, make it the ideal unit to move around and store anywhere in a workshop. Removable steel worktop with composite inlay 4 shallow and 2 deep drawers 60kg telescopic ball bearing slides Total loading capacity of 400kg
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Sonic Equipment offers a range of toolboxes from S7 through S15. The design focuses on usability, efficiency and style. All tool trolleys have a one-piece steel structure, an electrostatic powder coated exterior and 100% extractable drawers. All filled tool trolleys are equipped with the Sonic Foam System, SFS. Compact dimensions of the S7 trolley make it ideal for maneuvering and storing anywhere in the workshop. 80 cm wide, 90 cm high and 51 cm deep Ideal for basic and intermediate tool sets Removable steel worktop with composite inlay 4 shallow and 2 deep drawers Drawer guides with 60 load capacity kg Drawers Max. Load Capacity: 400kg Dimensions of Drawers: 4x 570x370x60mm 2x 570x370x139mm Type of Worktop: ABS Type Wheels: 4 solid wheels Ø 100mm, 2 of which are swivel with stop Bottle holder: 1 Powder coated 100% extractable drawers Guides on ball bearings Lock With Keys< /p>
Request for a quoteResults for
Composite steel - Import exportNumber of results
34 ProductsCountries
Company type
Category