Chrome steel - Import export

Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

Chrome products are made from Chrome 304 Stainless Steel and are designed to dress up the vehicle, add protection, and give it an elegant look. Each item has a great fit & finish. Two tape strips of 3M strong permanent double-sided super self-adhesive sticky tape, are used for super-strong stickiness.

Ø22 or Ø27 Complete set for reefer including hinges. Galvanized or Stainless Steel

DISC DIAMETER is 660/520/420 mm. CHEWING WIDTH .228 mm TOTAL WIDTH .290 mm PALLETLING AREA .4727cm2 DISC WITH CONICAL RINK AND BOLT INTERNAL SPEED .6,9 m/secROLL DIAMETER .320 mm.ROLL WIDTH .232 mm DOUBLE ROLLER .BELT PULLEY TRANSMISSION and TWIN MOTOR 15* 15 TOTAL 30 PIECES V BELT DRIVEN MAIN MOTOR 2 PIECES 110 KV 1000 rpm .PELLET CELL 304 QUALITY STAINLESS STEEL PELLETIZING CELL SAFETY SWITCH .FIXED MAGNET .1 PIECE CHROME STEEL XT 86,day WITH DRILLING METHOD DRILLED VACUUM HARDENED AND TURNED-ISO 9002 QUALITY CERTIFIED PELLET PRESS DISC 1 SET COMPLETE ROLL.

The base material is ceramic staple fibres. Necessary for spinning the ceramic fibre is a carrier. The carrier material decomposes at 200 °C. When the material is heated up for the first time smoke development and a flaming up is noticeable. The core made from chromesteel wire Provides strength when the carrier material has decomposed. When used under stress, the carrier material determinesthe temperature limit. Available dimensions: 3 - 30 mm.

Stapler built entirely of chromed steel, shot without backlash, suitable for fixing of textiles, paper, plastic and other lightweight materials on the hardwood. Charging from below. This model is compatible with staples series 13 with lenght of 4-6-8 mm, total width of 10,65 mm, section 0,50x0,75 mm.

We process the following materials: ■ chrome-nickel steel ■ various types of steel ■ non-ferrous metals ■ various aluminium alloys steel processing, stainless steel, machine engineering, tool engineering, metal processing, sheet steel processing, material 16 Mo3, Hardox, 1.4301, 1.4571, 1.4404, S355, S235, metal products, steel products, supplier construction machinery, power station, energy station, offshore equipment, pipes, steel halls, metal construction, profiles, handrails, balconies, stairs, roofing, pallet warehouse, pallet inverters, scrap conveyors, transport racks, special frames, devices, die blocks, barrel press, fork shoes, fork extensions, industrial gates, fences, customized constructions, industrial service, furnaces, playgrounds, sports fields, cladding, casing, housing, covers, noise-protection cabins, machine frames, large milled parts, conveyor technology, conveyor line, plunge pools, tank barrels and much more

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

GN 1/1 - GN 3/1. Surface chrome nickel steel. Ready to plug-in. Refrigerant: 600a. Adjustable from -5° to +15°C.

Universal-jet steamer and warming device. Design: Chrome nickel steel 18/10, thermostatically adjustable from 30 – 110 °C, clock, heating with overheat protection.

Table top. Hot or cold combined in one plate. Temperature variable from – 5 °C to +110 °C. With Self-Cooling-System (refrigerant R600a). Casing chrome nickel steel 18/10, glass facing.

Hot or cold combiplate, GN 1/1 - GN 3/1. For flush built-in, facing made of chrome nickel steel. Digitally adjustable from - 5°C to + 140°C. Ready to plug-in. Refrigerant R600a.

Design: Carving station made of chrome nickel steel 18/10. Digital adjustable from 30 – 100 °C. Carving surface with retaining lip. Incl. heat resis tant carving board made of glass. Available with cough protection on guest side upon request.

Design: Frame structure made of anodized special light-metal-profiles, without side panels. Tray support made of chrome nickel steel 18/10. Mounted on 4 corrosion protected,ball bearing castors with distance holding rolls, 2 of them lockable.

foot plate Ø40, Ø50, Ø60mm made of steel with chrome plated surface lower surface made of PA black

Material: - seat shell: beech plywood (10 mm) - frame: tubular steel chrome-plated, Ø 20 x 1,8 mm, incl. fixed connectors

Design: Frame structure made of chrome nickel steel square tubes 25 x 25 mm, completely welded. Tray supports made of chrome nickel steel angle material. Mounted on 4 corrosion protected, ball bearing castors. 2 of them lockable. 4 distance holding bumpers. Height distance of tray supports 125 mm. Also available with stainless steel doors (stainless steel facing closed all around).

Design: Chrome nickel steel 18/10. With on-off switch and control lamp. E-Connection: 26046: 230 V – 0,6 kW. Thermostat fixed at max. 80 °C. 26053: 230 V – 0,5 kW. Continuously adjustable temperature control by thermostat.

Design: Casing chrome nickel steel 18/10. Continuously adjustable temperature control from 30 – 90 °C by loosely attached ther mostat, with casing. 2 x GN 1/1 and 3 x GN 1/1 seperately adjustable.

Design: Chrome nickel steel 18/10. Basin indirectly heated (heater underneath basin bottom). Thermostat loosely attached with built-in casing. Basin rim folded 15 mm down all around. With water supply, drain and overflow for steady connection and automatic water level control.

GLINDE luxury cutlery graces tables with its elegant curvaceous lines. This curve extends to the end of the handle finishing with a soft halo decorative shape. The collection is made of the highest quality 18/10 chrome-nickel-steel.

Design: Chrome nickel steel 18/10. Continuously adjustable temperature control from 30 – 100 °C by loosely attached thermostat, with control lamp and casing. E.-Connection: 230 V – 0,5 to 2,0 kW, ready to plug in. Thickness of plate 2 mm, setback 15 mm all around, mounting height: 115 mm. Cut-out dimensions: Length minus 25 mm, Depth minus 25 mm.