Chrome steel - Import export

Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

Chrome products are made from Chrome 304 Stainless Steel and are designed to dress up the vehicle, add protection, and give it an elegant look. Each item has a great fit & finish. Two tape strips of 3M strong permanent double-sided super self-adhesive sticky tape, are used for super-strong stickiness.

Ø22 or Ø27 Complete set for reefer including hinges. Galvanized or Stainless Steel

DISC DIAMETER is 660/520/420 mm. CHEWING WIDTH .228 mm TOTAL WIDTH .290 mm PALLETLING AREA .4727cm2 DISC WITH CONICAL RINK AND BOLT INTERNAL SPEED .6,9 m/secROLL DIAMETER .320 mm.ROLL WIDTH .232 mm DOUBLE ROLLER .BELT PULLEY TRANSMISSION and TWIN MOTOR 15* 15 TOTAL 30 PIECES V BELT DRIVEN MAIN MOTOR 2 PIECES 110 KV 1000 rpm .PELLET CELL 304 QUALITY STAINLESS STEEL PELLETIZING CELL SAFETY SWITCH .FIXED MAGNET .1 PIECE CHROME STEEL XT 86,day WITH DRILLING METHOD DRILLED VACUUM HARDENED AND TURNED-ISO 9002 QUALITY CERTIFIED PELLET PRESS DISC 1 SET COMPLETE ROLL.

The base material is ceramic staple fibres. Necessary for spinning the ceramic fibre is a carrier. The carrier material decomposes at 200 °C. When the material is heated up for the first time smoke development and a flaming up is noticeable. The core made from chromesteel wire Provides strength when the carrier material has decomposed. When used under stress, the carrier material determinesthe temperature limit. Available dimensions: 3 - 30 mm.

Stapler built entirely of chromed steel, shot without backlash, suitable for fixing of textiles, paper, plastic and other lightweight materials on the hardwood. Charging from below. This model is compatible with staples series 13 with lenght of 4-6-8 mm, total width of 10,65 mm, section 0,50x0,75 mm.

STEEL GRADES The standrard stock of chromed bars consists of steel grades C45 or C45E or C45R and 20MnV6 in untreated delivery condition (+AR) and 42CrMo4 in quenched and temperd delivery condition (+QT). DELIVERY CONDITIONS The solid bars subjected to chroming process are available in different delivery conditions in orde to obtain specific properties. NORMALIZATION Heat treatment consisting heating process followed by gradual cooling in controlled atmosphere. Thanks to this process the steel structure becomes more "refined" and improve its impact properties (perlitic structure). INDUCTION HARDENING The surface of the steel bar is heated by electric induction followed by fast cooling. This process leads to a high surface hardness but also to fragility and low impact values (Martensite surface structure). QUENCHING AND TEMPERING Quenching process followed by tempering. This process leads to a good hardness and resistance and it reduces its fragility in comparsion to induction...

We process the following materials: ■ chrome-nickel steel ■ various types of steel ■ non-ferrous metals ■ various aluminium alloys steel processing, stainless steel, machine engineering, tool engineering, metal processing, sheet steel processing, material 16 Mo3, Hardox, 1.4301, 1.4571, 1.4404, S355, S235, metal products, steel products, supplier construction machinery, power station, energy station, offshore equipment, pipes, steel halls, metal construction, profiles, handrails, balconies, stairs, roofing, pallet warehouse, pallet inverters, scrap conveyors, transport racks, special frames, devices, die blocks, barrel press, fork shoes, fork extensions, industrial gates, fences, customized constructions, industrial service, furnaces, playgrounds, sports fields, cladding, casing, housing, covers, noise-protection cabins, machine frames, large milled parts, conveyor technology, conveyor line, plunge pools, tank barrels and much more

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

SHIKOKU knives are made of the highest quality chrome nickel-steel, which increases their strength and corrosion resistance.Strong, stlish and effective.

Universal-jet steamer and warming device. Design: Chrome nickel steel 18/10, thermostatically adjustable from 30 – 110 °C, clock, heating with overheat protection.

lnspired by architectural design, our NAMUR cutlery series is made of high quality polished 18/10 chrome nickel-steel and stands out on any table.

Table top. Hot or cold combined in one plate. Temperature variable from – 5 °C to +110 °C. With Self-Cooling-System (refrigerant R600a). Casing chrome nickel steel 18/10, glass facing.

Sprocket steel. Ball bearing chrome steel. Screw and nut steel. Version Sprocket teeth hardened to HRC 50, electro zincplated. Ball bearing with sealing discs 2ZC3. Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. Note For tensioning roller chains. The sprocket set can be combined with all tensioning elements to form a readytoinstall chain clamp. The ball bearings are sealed both sides, permanently lubricated and maintenancefree. The sprocket can be moved on the screw and thus adapted to the chain track. With the duplex and triplex version, precision spacer sleeves ensure correct chain guidance. Rigid mounting without a tensioning element is also possible. Can also be used as an idler sprocket.

Hot or cold combiplate, GN 1/1 - GN 3/1. For flush built-in, facing made of chrome nickel steel. Digitally adjustable from - 5°C to + 140°C. Ready to plug-in. Refrigerant R600a.

Design: Carving station made of chrome nickel steel 18/10. Digital adjustable from 30 – 100 °C. Carving surface with retaining lip. Incl. heat resis tant carving board made of glass. Available with cough protection on guest side upon request.

Design: Frame structure made of anodized special light-metal-profiles, without side panels. Tray support made of chrome nickel steel 18/10. Mounted on 4 corrosion protected,ball bearing castors with distance holding rolls, 2 of them lockable.

foot plate Ø40, Ø50, Ø60mm made of steel with chrome plated surface lower surface made of PA black

Material: - seat shell: beech plywood (10 mm) - frame: tubular steel chrome-plated, Ø 20 x 1,8 mm, incl. fixed connectors

Design: Frame structure made of chrome nickel steel square tubes 25 x 25 mm, completely welded. Tray supports made of chrome nickel steel angle material. Mounted on 4 corrosion protected, ball bearing castors. 2 of them lockable. 4 distance holding bumpers. Height distance of tray supports 125 mm. Also available with stainless steel doors (stainless steel facing closed all around).

Design: Chrome nickel steel 18/10. With on-off switch and control lamp. E-Connection: 26046: 230 V – 0,6 kW. Thermostat fixed at max. 80 °C. 26053: 230 V – 0,5 kW. Continuously adjustable temperature control by thermostat.

Design: Casing chrome nickel steel 18/10. Continuously adjustable temperature control from 30 – 90 °C by loosely attached ther mostat, with casing. 2 x GN 1/1 and 3 x GN 1/1 seperately adjustable.

Design: Chrome nickel steel 18/10. Basin indirectly heated (heater underneath basin bottom). Thermostat loosely attached with built-in casing. Basin rim folded 15 mm down all around. With water supply, drain and overflow for steady connection and automatic water level control.