Ceramic stone - Import export

Colored adhesive joint for sealing joints from 0 to 15 mm, with high resistance to abrasion and reduced water absorption. USES Seal joints between floor and wall tiles, both indoors and outdoors. Suitable for all types of ceramics and stones. Suitable for filling swimming pool joints.

Improved, single-component, deformable adhesive cement with excellent workability and adhesion, non-slip and with a long open time. USES For floor and wall coverings. Suitable for all types of ceramic or natural stone pieces. Suitable for all types of surfaces. Particularly suitable for: facade coverings, tile coverings, heated floors, high traffic floors, swimming pools, waterproofed supports, suitable for plaster or anhydrite supports.

Cement-based self-levelling mortar for low thicknesses 5-20 mm, type CT-C30-F7-A22, made with marble aggregates and special additives that give it optimum fluidity, to be used for the regularisation, repair and levelling of paving slabs. It is a product with high mechanical resistance and a good surface finish, ideal for the creation of continuous screeds. This mortar can be applied on a wide range of supports such as concrete, cement screeds, anhydrite, ceramic or natural stone, both indoors and outdoors.

Improved single-component adhesive cement with excellent workability and adhesion, reduced slip and extended open time. USES For interior and exterior floors, interior coverings. Laying and covering floors of all types of ceramic or natural stone rooms. On traditional mortar plaster supports, concrete, large-format bricks, plaster and plasterboard, anhydrite, waterproofed supports, etc. Particularly suitable for: Floors with heavy traffic, swimming pools, applications with permanent humidity and frost, suitable for plaster or anhydrite supports.

Improved single-component adhesive cement, highly deformable, with excellent workability and adherence, without slippage and with a long open time. USES For floor and wall coverings. Laying tiles and floor coverings of all types of ceramic or natural stone rooms. Suitable for all types of surfaces. Particularly suitable for laying large format ceramic tiles, facade coverings, tile overlaps, heated floors, cold rooms, high traffic floors, swimming pools, waterproofed substrates, suitable for plaster or anhydrite substrates.

Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for indoor and outdoor use, with inert fillers that give it a textured surface. USES FIXMAR PRIMER GR is an adhesion promoter suitable for improving the adhesion of any type of plaster or coating on concrete, brick, lightweight block or plaster supports, as well as on non-absorbent supports such as ceramic floor coverings. On walls and floors. Suitable for application on non-absorbent supports such as ceramic floor coverings with subsequent installation of ceramic or natural stone coverings. On porous cement, anhydrite or sand screeds, FIXMAR PRIMER GR primer acts as a fixer of dust residues, facilitating the correct adhesion of a self-leveling mortar. Acts as a pore cover.

Sorelia white clay stone is made from 100% natural ingredients. It has been manufactured in France for over 20 years. It is certified ecological by Ecocert Greenlife. Ecological, economical and effective, it cleans, degreases and removes limescale from all surfaces, in the kitchen, bathroom and garden. Sorelia white clay stone degreases: ceramic, induction, gas or electric hotplates, oven grills and doors, barbecues, plancha, dishes and pans, microwave ovens. Sorelia white clay stone descales: stainless steel and synthetic resin sinks, taps, washbasins, shower screens, shower trays and bathtubs. Sorelia white clay stone cleans the refrigerator, freezer, garden furniture, car rims and windscreen, white trainers, golf clubs. Sorelia white clay stone can be used everywhere: at home, in the garden, at work, on the boat, in the camper van or caravan.

secutex secuGrip90laminate secuGrip90 laminate is our new, selfadhesive antistick laminate that you can apply yourself. The secuGrip90 coating, which is up to 2 mm thick, features a high coefficient of friction and is extremely abrasion resistant. Application is easy The reverse side is coated with an acrylate adhesive designed to stick to a variety of smooth surfaces including Metals, glass, ceramic, stone, paper & cardboard, fabric, various plastics and soft plastics. Features of the acrylate adhesive high adhesive strength temperature and weather resistant tolerates moisture well equalises tension

The end-of-line X-ray inspection system offers maximum safety. By using X-ray technology the XRE-D detects contaminated, damaged and defective products and packagings. Besides metallic and non-metallic foreign objects it detects missing, defective or misshaped products as well as overweight or underweight. Thanks to an efficient quick conveyor belt change system the belt can be changed within two minutes. The product inspection system XRE-D X-ray inspection system detects all foreign objects, which due to their density, chemical components or mechanical dimensions absorb X-rays at a higher or lower degree than the surrounding product. During production numerous detection tasks can be safely fulfilled such as the detection of metals, glass, ceramics, stones, raw bones, PVC, Teflon, rubber, glass fibre reinforced plastics etc. In packaged or unpack-aged food (non-magnetic stainless steels and non-ferrous metals in aluminium packaged food). X-Ray inspection is an ideal solution for...

Cleaning of cooling devices, beverage and goods vending machines Cleaning of tiles, ceramics or natural stone Cleaning of construction machines and lorries, tarpaulins Cleaning of machine tools and workshop floors Advantages and benefits NSF A1 registered No classification marks according to (EG) No. 1272/2008 Free of organic solvents and phosphates Readily biodegradable Good separation behaviour Gentle to plastics, seals, rubber and sensitive metal surfaces Depending on the degree of soiling, can be diluted up to 1:10 Suitable for use with high-pressure cleaners MOSH/MOAH-free

lastic and strong adhesive and sealant on polyurethane (PUR) basis. For bondings and sealings on metals, many plastics, ceramic, wood, glass, stone, etc.. Applications: Tank and apparatus construction, Car body, freight container and vehicle construction, Ventilation and air conditioning, Pipeline and fittings construction, Energy and electrical industry, Insulating technology and in many areas of plastic technology and wherever silicone is not suitable. Properties: Can be painted over and sanded after curing, Odourless curing, Resistant to weathering and UV, Excellent aging resistance, Resistant to fresh water and saltwater, Stable, pasty and Silicone-free. A better adhesion is achieved by using suitable WEICON adhesion agents. With suitable paint coating systems (except alkyd resin paints). Available in white, grey and black.

Tyrolit table saw blades excel in professional machining of various materials, including tiles, fine stoneware, ceramics, hard stone, marble, exposed aggregate concrete, concrete blocks, and cellular concrete. We even offer a specially developed blade for cutting refractories. Tyrolit combines table saw blades and machines to create system solutions that ensure top results for all cutting operations. This variety and quality make us a valued partner in the construction industry and among professionals who demand precise results. Our table saw blades come in various designs, with SILENT options reducing noise by up to 10 dB, benefiting operator health and motivation. Tyrolit ensures perfect quality and service, offering fast delivery and all relevant blade diameters. High-quality sharpening plates are available for dry-cutting blades.

Soundproof Cork Underlayment for flooring is something that most people don't think about on a daily basis unless you are in an occupation which deals with flooring. Create high performance sound control with Rubber Cork underlayment. Corck Rubber products provide superior impact noise and foot step sound reduction. Better sound reduction than many foam products and superior compression recovery performance. The high performance recycled Rubber Cork sound control underlayment may also be used with ceramic and natural stone flooring. Usage areas Sound Insulation Cork Rubber is used for controlling noise in condominiums, apartments, multifamily dwellings, commercial buildings, and other areas where footfall and impact noise can be the cause of occupant complaints. Sound insulation cork rubbers should use in; Classrooms

Premixed self-levelling screed, based on hydraulic binders, fibro-cocked, with special polymeric extruded aggregates, with compensated shrinkage and controlled drying, ideal for the realization by hand or machine, even with plastering machines. to be applied directly on any internal and external surface, provided that it is stable and not subject to capillary ascent, suitable to receive the next Application of any paving such as ceramics, terracotta, natural stones, parquets, carpets, rubber, etc.; Suitable for the realization of screed with insertion of underfloor heating and floating scree on a resilient mattress for the acoustic insulation of footstep noises

It uses for sensitive surfaces such as natural stone, ceramic, marble, granite, and linoleum. It does not contain acid and leave any mark. The formulation is water based. It removes oil, sludge, waterbased varnish, grease, tire marks and similar stubborn dirt thoroughly. It polishes on surfaces efficient. It should be used 1/40 dilution ratio according to the stain condition. Using the brush is a recommended. The applied ares shoul be rinsed.

concrete, screed,galvanized steel, aluminum, etc. surfaces. It is highly resistant to the atmospheric conditions and can be produced as transparent or colored. It has excellent water resistance as well as high chemical and physical resistance. It is a two-component product that can be used for waterproofing as well as decoration. It is not affected by UV and weather conditions. Yellowing, fading or lifting off over time does not occur. Especially in solving insulation problems arising on the floors such as balconies, terraces, bathrooms, pools, etc., it is easily applied without defecting and damaging the existing coating. AREAS OF USAGE: • Glass, glass brick, mosaic, terrazzo tiles, • Tiles, ceramic, marble, granite, natural stone, porcelain surfaces • Travertine, pressed bricks, • PVC, aluminum, galvanized steel, wood, • Balcony, terrace, bathroom, kitchen, stone covered exteriors.

Discover MECAJET the new range of Water Jet equipments conceived by MECANUMERIC, machining and cutting by VHP soft materials, and, with addition of abrasive, hard materials. Refer to the exemples of applications : Precision engineering technical parts Electric vehicles parts Parts for subways Parts for trams Bus parts Trolleys Household appliances Lights Furniture Weather vanes Discover the new range of very high pressure Waterjet equipment MECAJET designed and manufactured by MECANUMERIC, for cutting of several materials: * Soft materials: - rubber - plastics - leathers... * And, with addition of abrasive, hard materials: - metal - ceramic - glass - stone - composite materials... The MECAJET integrate the last novelties: driving system on POWER AUTOMATION numerical control (CN7100 ISO), new long-lasting pneumatic cutting heads, axes positioning control, 3 or 5 axes head, clearance control, etc... The cutting table is equipped with a steel welded one-block frame with...

Size : 300x300mm Brand : Thach Ban Origin : Vietnam Grade : A1/ A Thickness : 9.0 +- 0.3 (mm) Surface treatment : Matt finished. Surface quality : Min 95% free from any visible defects Water Absorption : below 15% Remark : Can follow OEM purpose

Size : 300x300mm Brand : Thach Ban Origin : Vietnam Grade : A1/ A Thickness : 9.0 +- 0.3 (mm) Surface treatment : Matt finished. Surface quality : Min 95% free from any visible defects Water Absorption : below 15% Remark : Can follow OEM purpose

The BSC grinding materials are widely used in the abrasive tools manufacturing and fixed-abrasives - rougher, cutting-off and grinding; tools on a flexible base - coated abrasives, in the process of loose abrasive grains grinding. The BSC grinding materials are used: in the process of iron and nonferrous metals, carbon, glass and ceramics, stone, concrete, bricks and chamotte, wood substance, plastics, leather, rubber, and other hard, tough, brittle, alloys, and materials of natural and artificial origin treatment; in the refractory and ceramic industries as a component for moldings and antipenetration washes, in the process of crucibles for casting of non-ferrous and precious metals production, for wash troughs. Refractory products of silicon carbide abrasive materials have high thermal conductivity, heat resistance (deformation starting above 1500 C), resistance to acid slags.

Azulejos Gimenez manufacturers of quality cheap tiles. Many models of tiles for the wall and floor such as porcelian, ceramic, natural stone, marble, skirting-tiles, border-tiles, etc. Specialist in export to over 40 countries. Take a look at our online store. For any enquiries please be free to contact us.

Highly cohesive ready-made adhesive.mortar . Used in bonding stones such as ceramics, tiles,terracotta, clinker,granite and natural granite by mixing with only water in certain proportions.

Highly cohesive, flexible, ready made adhesive mortar with reduced slip feature, extended standing time after opening, and polymer additive that is used in bonding stones such as ceramics, tiles,terracotta, clinker,granite,and natural granite. Used by mixing it with water in certain propotions.

POLIFIL:  E.P.S Styrofoam granular mortar - concrete admixture  It forms a bond between styrofoam granules and cement mortar.  It creates air bubbles in the cement mortar accumulated in the gap between the granules and reduces the cement consumption.  It provides good strength due to the crystallization in the inner wall of the cement mortar surrounding the air bubbles surface. Prepared with POLİFİL, Styrofoam Granulated concrete Breathable, Does not perspiration, Moisture-proof.  It provides long-lasting concrete. Styrofoam Granulated Concrete Concrete Surface No dusting. Concrete, Concrete surface becomes hard and Strength. Styrofoam does not to the surface. There is no need to cover the screed surface with concrete. Ceramic, Tiles, Stone, Parquet Can be easily bonded. Styrofoam Concrete does not collapse under Heavy Load.