Carbon fibres - Import export

TECHNICAL DEFINITION Levelling filler for vertical substrates and for use on ceilings for poured concrete or pre-cast slabs. Ideal for the preparation of pre-cast slabs, formwork concrete and for the renovation of textured finishes or fibreglass with a paint finish. TECHNICAL CHARACTERISTICS • Dry extract : 75% • Density : 1.86 • VOC content : less than 1g/l COMPOSITION AND APPEARANCE Water, calcium carbonate, dispersant, bactericide, fungicide, cellulosic fibres, polyacrylates, clays, acrylic dispersant. AMOUNT REQUIRED From 2 to 4 kg for the first coat. From 1.5 to 2 kg for the second coat. APPLICATION SEMIN AIRLESS EXTREM filler is sprayed using the Airless pump or rotor machine/Flat spray stator in 2 coats. The first coat must be levelled using a 60 cm blade or levelled with a straight edge. After drying, the second coat must be smoothed using a blade.

With our CNC-fiber-laying technology we can realize very complex shapes and forms for lightweight-solutions in different kinds of industries like aircraft, automotive and leisure. Please contact us!

Carbon is a composite material and differs significantly from quasiisotropic materials like steel or aluminium. As with glass fibrereinforced plastics, the material properties depend on the direction. With a density of approx. 1.6 g/cm³, the material is very light, while maintaining good rigidity and vibration behaviour. If you want to increase the rigidity of a GRP component, it is often sufficient to use a blend of glass and carbon fibres.

We offer antistatic brushes with carbon fibre or stainless steel yarn. The stainless steel yarn consists of stainless chrome-nickel-molybdenum steel. The fine stainless steel filaments are twisted to a yarn. This yarn has high resistance to abrasion, even when subjected to continuous mechanical load. The standard type AB10 is available from stock. Carbon fibres are excellent conductors, thanks to the high proportion of carbon which they contain. The variable distance between the tufts make carbon-fibre strip brushes the ideal choice for difficult static removal applications. The excellent conductivity of these brushes can also be used to allow voltages to be applied to the surface of workpieces. The standard type AB20 is available from stock.

S-Ply® is the registered name for composite leaf springs that are manufactured by Prause Durotec. The reinforcing material has a strictly parallel-oriented, non-interlaced glass or carbon fibre structure. The fibres are neither pre-stretched nor bent. In contrast to metallic materials with an isotropic structure, they are direction dependent and therefore can be aligned to suit the material structure.   Epoxy resin compounds are used as binding agents. Their special balanced composition ensures high adhesion to the glass fibre surface, resulting in optimum dynamic and electrical properties. The ratio of matrix resin and reinforcement fibres has been chosen to profit from all of the benefits offered by the raw materials selected to form the composite material.   The matrix fulfils a number of important tasks. It provides fixing for the fibre in the desired arrangement and supports it against buckling when under compressive stress.  In addition, it has good load carrying and transmissio

The tensiometers of the DCAT series are measuring instruments for force-based investigation of surface and interface properties. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25SF single-fibre tensiometer contains a high-precision weighing system with a resolution of up to 0.1 μg. This enables measurements even on single carbon or glass fibres. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 135 °C. In addition is it possible to investigate the viscoelasticity of monolayers. Furthermore, concentration series for determining the critical micelle concentration (CMC) can be automatically generated and measured. Measurements: - surface and interfacial tension - liquid density - dynamic contact angles - surface energy of solids - determination of the CMC - surface pressure - viscoelasticity of monolayers

PU composites are mainly found in the production of moulded parts resistant to bending. The skilful combination of materials puts the topic of lightweight construction into the spotlight (honeycomb technology applications). Sophisticated surface designs are supported by corresponding PU / UP resin systems. Thanks to the reduced component weight, moulded part applications are used in the automotive sector – and, with corresponding flame protection formulations, also in rail vehicle construction. Typical properties Moulded part density of 450–1100 kg/m³ Fibre proportion from 30 % Available foaming agents: usually water Reinforcing materials Glass fibre rovings Glass fibre mats and non-crimp glass fibre fabrics Carbon fibres Natural fibres (hemp, sisal, coconut etc.) Special formulations and versions Honeycomb materials for sandwich structure components Paper honeycombs Waterproof paper honeycombs (patent-pending process) Plastic honeycombs Aluminium honeycombs Systems with a large processing window Use of polyols based on renewable resources Self-parting with simultaneous good lamination properties Flame protection formulations Automotive: FMVSS 302 Rail vehicle construction: DIN 5510 (S4, SR2, ST2) Aircraft construction: FAR 25853, ABD 0031 Construction industry: DIN 4102 B2

The perfect machine to quickly and automatically return the winding material remaining on the spools to the recycling process. The spools do not suffer any damage and can therefore be used over a long period of time. Device details: ▪ Enables up to 24 braiding spools to be unwound at the same time ▪ Appropriate spools: ▫ Diameter of mandrel 23 mm (standard version) ▫ Spool outer diameter up to 100 mm ▫ Other spools with different inner and outer diameters possible ▪ Suitable for different winding materials, e.g. metal wire, plastic, natural, glass and carbon fibres

Ultra-slim model designed for elegant sailing boats Diameter: 800, 900, 1000 and 1100 mm Color: carbon fibres or any RAL color

Design for all nautical enthusiasts with a race spirit. Diameter: 800, 900, 1000 and 1100 mm Color: carbon fibres or any RAL color

For high-tech applications requiring high strength and stiffness combined with light weight, SIGRAFIL continuous carbon fiber tows are indispensable. They form the basis for high-performance composite materials such as textiles and prepregs, as well as components made of carbon fiber-reinforced plastic (CFRP). Carbon fibers are used in the automotive industry, in aerospace, in wind turbines, but also in sports equipment or mechanical engineering. By applying different types of sizing, the carbon fibers can be optimally matched to different matrix systems.

The gloves are made of 100% polyamide with carbon fibre admixture. They have excellent grip ability, are soft and flexible, and are primarily used for the protection of products against static electricity and for protection of hands against mechanical risks (dirt, scratches, abrasions). Complies with EN 6134051 with typical values <10^7 Ω resistence through the wearer to groundable point Rg. Electrostatic dissipative. The gloves comply with the relevant articles of the EN 420 + A1 and EN 388 standards, meet the requirements for antistatic features according to EN 11495, and further meet the requirements of EN 11491 for Electrostatic Properties – Specific Surface Resistance.

The primary building blocks for carbon fiber composite materials begin with Hexcel’s HexTow® carbon fiber which is the preferred carbon fiber for the world’s most advanced aerospace and industrial applications. Hexcel is the leading manufacturer of carbon fiber with more than 45 years of experience and the most qualified positions on aerospace programs. Hexcel manufactures of a broad range of high performance carbon fibers for both aerospace and industrial applications and is the leading carbon fiber supplier to U.S. military applications. We are committed to premiere customer service, technical support, and being the leader in providing global innovative carbon fiber material solutions. - HexTow® Continuous Carbon Fiber - HexTow® Chopped Carbon Fiber ** Click for more **