Automatic saws - Import export

Drive 7,5 kW, S 6, 400 V, 50 Hz, R.P.M. of sawblade infinitely adjustable (2.000 – 3.500 R.P.M.) Sawblade Ø 500mm, smaller blades on request Cutting range max. 215 x 120mm (height x width) Hydro pneumatic saw blade feed, Speed infinitely adjustable, linearly under the tabletop from rear to front Material fence on the table for the cutting angle Feed length limited via 4 end switch horizontal profile clamping device on the feed and discharge side Cycle spray mist device Pusher Profile feed from right to left with ball screw and servo motor Feed length from 10 to 2500 mm Feed speed max. 250 mm / sec. Repeatability +/- 0.1 mm iincl. horizontal pneumatic clamping device Reversing possible, max. Stroke length 7,300 mm Siemens S7-300 with touch screen 10“

High performance automatic circular saw for aluminum and non-ferrous metals Fully automatic operation Infinitely adjustable speed control of the saw blade engine Material and saw feeder movement through servo driven ball screw spindle 2 axis CNC control Siemens S7 with 7” touchscreen Cutting range: up to 205 mm height and up to 400 mm width Rest-piece length as short as 55 mm (depending on profile) Machine can use carbide (TCT) or PKD blades diameter 650 mm (smaller diameter upon request) Automatic kerf widening to reduce scratches Individually controllable clamping pressure Motorized material feed with servo driven ball screw Pneumatic material clamps individually adjustable Positioning of the vertical and horizontal clamps by hand-wheel Cut off lengths of up to 5000 mm are possible by reversing the material feed up to 5 times Floating material feed to reduce material abrasion Feeder length of 1000 mm Simple exchange of saw blade, accessible from the front Saw blade feed is...

Fully automatic operation Motor 7,5 KW, S6, 400V / 50 Hz, 2850 R.P.M. For the use of saw blade Ø 550 mm Big cutting range Max cutting height up to 150 mm Max cutting width up to 270 mm 90° cuts Remaining piece from 75 mm Table separation before sawblade retracts powered ball screw spindle material feeder up to 600mm Feed length up to 600mm, Multiple movement of the feeder possible up to 9,9 m

Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication of cycle time Multiple feed device – max feed 3.250mm Table separation before the saw blade retracts so the profile is not touched by the saw blade Electronic material feeder, ball screw spindle and servo motor incl. pneumatic horizontal and vertical clamps Float mounting feeder to balance bend profiles Waste piece from 85mm Reducer of clamping pressure horizontal and vertical Cycle spray mist device with level indicator and automatic stop Cut-off length from 3mm Automatic cut-out when bar is finished Technical Data: Motor up to 18,5kW, S 6 40%, 400 V, 50 Hz, 2850 R.P.M. r.p.m. infinitely adjustable Saw blade speed 3.500 – 5.800 R.P.M Saw blade Ø 400mm Profile width max 200mm height max 120mm

High-Performance automatic circular saw for aluminium and non-ferrous heavy metal Fully automatic operation Use of TCT or solid carbide blades ø 250 mm Motor 7,5KW, 400 V, 50 Hz, infinitely adjustable Blade feeder hydropneumatic Material feeder with ball screw spindle and servo motor 2-axis NC control Simatic S7-300 with 7“ touch screen Cutting range: height up to 60 mm, width up to 140 mm Manual safety cover 2x Ø 100 mm swarf extraction connector Blade feeder pneumatic hydraulic controled vertical top to down Manual blade feed adjustment to optimize the feed length Pneumatic clamps horizontal left and right of the blade Diagnosis of errors, trouble shooting Pneumatic clamps vertical left of the blade Mist spray blade lubrication (filling level controlled) 1 l tank Parts slide (Option: conveying belt) Material feeder from 2 – 650 mm with ball screw spindle and servo motor Multiple material feed possible up to 3250 mm cutting length Vertical and horizontal clamps Reducer of...

0 – 300 mm adjustable pneumatic material feed and digital display Vertical hydraulic punching unit to the right of the saw blade Power 200 KN Punching tools according to profile shape Aluminium profile – finished Cut to length Vertical punching Up to 8 profiles in one operation cycle Cycle time from 13 s / 1,63 s each piece Layout of punching tools for multiple profiles Quick change punching tools according to the profile shape Pneumatic material feed 8 profiles at once Special shaped quick change support Clamps according to profile shape – changeable Hydraulic punching unit Power 200 KN, stroke 20 mm Cycle spray mist device for each die and for the saw blade

LATERALLY MOVABLE UNDERTABLE CROSS-CUT SAW / RIP CUT SAW FULLY AUTOMATIC CIRCULAR SAW FOR POSITIONING AND CONTROLLING VIA TOUCHSCREEN WITH LENGTH MEASURING SYSTEM EXENSO COMFORT (PUSHER SYSTEM) Application : Length stop system (pusher operation), revolving table with lateral movement and sawblade inclination via servo - motor for positioning (rip cut, cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Equipment / scope of supply : - Motor rating 12 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - lateral movement of machine table 400 mm with pneumatic brake system - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Cutting height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT - sawblade 650 x 30 x T 54

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

An efficiently sharpened saw blade is essential for productive and safe work processes. Tyrolit offers an extensive range of grinding tools for various saw blades, including chain saws, circular saws, band saws, and gang saws. Our abrasives are precisely matched to different grinding machines and tooth pitches for optimal sharpening results, featuring vitrified-bonded grinding wheels and resin-bonded diamond and CBN wheels for special applications. Tyrolit’s decades of experience are evident in our tools' grit qualities and innovative bond systems, ensuring optimal cutting edge quality. Our grinding tools for automatic chain saw sharpening machines promise extended service life and perfect tooth base radius matching. We also offer resin-bonded diamond wheels for special applications and CBN tools for grinding HSS and high-alloyed steels.

SCHMIDT Zerspanungstechnik's contract manufacturing department has a well-provisioned materials warehouse and the latest automatic band saws SCHMIDT Zerspanungstechnik's contract manufacturing division is a competent partner when it comes to cutting by saw too. We stock standard materials in the most common dimensions in our materials warehouse for you. This means that we can respond to requests extremely quickly. We have two ultramodern automatic band saws that can precisely cut to size materials with a diameter of up to 450 mm. The machines are capable of cutting mitres and stack cutting too.

SCHMIDT Zerspanungstechnik's contract manufacturing department has a well-provisioned materials warehouse and the latest automatic band saws SCHMIDT Zerspanungstechnik's contract manufacturing division is a competent partner when it comes to cutting by saw too. We stock standard materials in the most common dimensions in our materials warehouse for you. This means that we can respond to requests extremely quickly. We have two ultramodern automatic band saws that can precisely cut to size materials with a diameter of up to 450 mm. The machines are capable of cutting mitres and stack cutting too.

Semiautomatic seam saw for the automatic cutting of any type of can. Features include electropneumatic operation of blades with adjustable advancement, total retraction of blades if the protective cover is opened, modular fittings for can blocking, CEstandard protection and high soundproofing. Mono or triphase motors available.

The high-performance automatic circular saws of the HCS-E series are specialists for highest cutting performance and premium quality, which quickly pay for themselves in multi-shift operation. The basis of the extreme performance is the unique, extremely stable and solid construction with perfectly matched components and state-of-the-art drive technology. The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. And what is remarkable: This system concept covers a large range of all industrial requirements, providing the highest quality at an unbeatable priceperformance ratio.

The automatic plate saw VPS60-160A is BEHRINGER's solution when it comes to fully automatic cross-cutting of large plates and blocks. The vertical arrangement of the saw band has clear advantages over the horizontal design, as the engagement length of the saw band is significantly shorter. As a result, the cross cutting plate saw offers significantly higher cutting capacities while at the same time reducing tool costs. Thanks to their robust basic design and high-performance components, the automatic plate saws of the VPS series are designed for demanding applications in the steel trade, industry and metal production. From non-ferrous metals and aluminum to simple work steels and difficult-to-cut materials such as Inconel or titanium. Their modular design allows the cross cutting plate saw to be individually adapted to the customer's application.

The HCS MULTI-FLUID is a series of carbide circular saw manufactured by Eisele. The key highlights of the HCS MULTI-FLUID series include a firm base frame that is welded, a bigger scope of cutting, an arbitrary saw blade that is accessible to ensure maximum cutting scope that can reach up to 180 mm . The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. The Multi-Fluid system is excellent for high-alloy stainless steels and tool steels, nickelbasedalloys like Inconel and Hastelloy as well as titanium alloys. Depending on the requirements, the following cooling/lubrication components can be combined in a most effective way: — Coolant nozzles for wet processing — Micro-spraying device for minimum quantity lubrication — Cooling vortex tube for dry cutting

The VMS automatic machines are designed for the ultimate handling simplicity - both for series cuts and in manual operation. The machine operation takes place using a convenient NC control. Where your operations call for frequently changing single cuts, an optional bar start detection system makes for even simpler material handling through fully automatic length positioning without the need for manual intervention. The generously dimensioned casing complies with the latest safety requirements and can be fully opened for improved access. — Material feed with flat guide and ball screw spindle for high-precision positioning — Large-dimensioned cover hoods meet highest safety standards — Easy to operate in automatic and manual operating mode — Can be combined with roller conveyors — 4 speeds as standard for machining almost any steel quality — Both coolant and micro spray system standard

The SLB bandsawing machines from BEHRINGER: A trustworthy partner for workshop and plants. Suitable for cutting tubes, profiles and solid materials made of metal and comparable plastics. Competitive pricing, precision made components, and impressive power. See for yourself. - Mitre cuts are possible from + 30° to – 45° - Scale for setting the exact angle — Clamping of the saw frame with a quickly-tension lever — Downfeed control by a hydraulic flow control valve - Automatic height-setting of the saw frame above the material — Frequency controlled sawblade drive (optional) — Exact cutting

EISELE has launched the PSU 450 that is versatile and simple when it comes to handling. For its flexibility, the automatic mitre adjustment and feed gripper are made. It can be paired with infeed magazines and disposal machine due to its structure. This product is robust and durable. Its standard sawblade is 450 mm long. he solid machine base ensures a vibration-dampened and low-noise sawing process. This achieves excellent cutting performance as well as high saw blade life.

Universal, precise and fast - these are the performance features of the PSU 450 H semi-automatic mitre saw for cutting metals. Designed for cutting profiles, pipes and solid material in metal and comparable materials, this machine is specifically designed to address the needs of locksmiths and metalworking shops. The mitre setting is equipped with convenient fixed stops at 90°, 45° and 30°. The 450 mm diameter saw blade used offers a wide cutting range - also for mitre cuts. The heart of the PSU mitre saw unit is the worm gear unit with EISELE shock-absorbing feature, produced in-house. It is heavy duty and provides for a smooth, low-vibration running of the saw, which, of course, has a positive impact on the quality of the cutting surface and the blade life.

Simple operation, robust design and precise cuts make the metal-cutting cold saws of the VMS series a reliable partner in the workshop and factory. They are real all-rounders when it comes to cutting solid materials, tubes and profiles. In addition to the automatic saw feed, the VMS 350 PV also offers pneumatic clamping of the material. The heart of the VMS circular saw unit is the worm gear unit with EISELE shock-absorbing feature, produced in-house. It is heavy duty and provides for a smooth, low-vibration running of the saw, which, of course, has a positive impact on the quality of the cutting surface, the blade life and the service life of the saw. A quick change of the saw blade is easily possible thanks to the large safety hood. The hydro-pneumatic saw feed can be adjusted infinitely.

The HBP1100 - HBP1500 / HBP1100A - HBP1500A are series of semi-automatic and automatic large bandsaws manufactured by Behringer. The large-scale universal machines from BEHRINGER can handle any job that is needed. Their expertise: Handling heavy-duty workpieces with ease and slicing through the material with extreme cutting performance. When processing long solid workpieces – rolled or rough turned – or processing large pipes, these benefits make for dramatic improvements in productivity. Round or rectangular – the results are equally impressive. In the BEHRINGER semi-automatic models, the material is positioned by eye, for instance with the aid of a line laser. For longer cut piece lengths, we recommend using a measuring device for precise positioning. The use of a feed gripper allows automatic sawing of solid material or pipes.

The automatic mitre bandsaws from BEHRINGER are saws to really get things moving. Particularly when it comes to classical series production such as cutting to fixed lengths and mitre sawing in automatic mode. And also when cutting layers and packages they make a good impression. By their excellent cutting performance and short nonproductive times, your productivity can be increased significantly. Using an NC controlled feed gripper in conjunction with an NC controlled saw frame mitre box, fully automatic mitre cuts can be performed on both sides. The PC control system provided as standard makes for extremely simple menu-prompted operation of the saw and peripheral devices. The BEHRINGER mitre bandsaws contain many useful features already in the basic price: - Convenient PC control - Fast NC-controlled mitre system - Vertical clamping unit - NC-controlled feeding gripper with 3.000 mm feeding length in single stroke - Spray mist cooling system

Semi-automatic machines for single cuts and small seriesWith automatic saw feed and quick-clamping device for the material, the semi-automatic models offer higher cutting output levels and more operating convenience than the manual saw variants. By ensuring fatigue-free working for the operator, they are also suitable for sawing small production runs: Quick-acting pneumatic / hydraulic clamping device Clamping pressure reduction available as option Variable hydro-pneumatically / hydraulically controlled setting of the saw blade feed Easy miter cutting positioning with fixed stop Easy stroke adjustment of the saw unit via 2 clamping levers Well dimensioned worm gear unit with EISELE shock-absorbing feature Quick and easy blade change

Automatic upstroking circular saw with NC Programmable Controls. Yilmaz SK450 Standard Details Designed for high-volume straight cutting of non-ferrous profiles 4 – 6 second cycle time* High precision servo motors accurate to ±0.05mm* 450mm TCT blade with 4 kW motor Servo-controlled infeed speed and saw blade stroke adjustment Horizontal and vertical pneumatic clamping of the workpiece for precise cutting Automatic retraction of stock material at end of cut to protect the surface from scratches Single or multi-bar** (bundle) cutting Computer-controlled blade lubrication system System shuts down automatically after cutting the required quantity Interlocked safety guards Windows-based industrial PC with 7’’ LCD colour touch screen HMI & USB cutting job input Internet connection possible for technical support Automatic feeder stroke from 5 – 600mm. Maximum cutting length 9990mm Automatic end of bar sensor *Depending on material **Extra-cost option

The Bomar Workline 410.280DGH is a semi-automatic mitre bandsaw and is an ideal basic model for the production of steel structures. The both-sided mitre cuts continuously adjustable within the 0–60° range, with a large, easy-to-read angular scale. This machine features also an easily movable clamping vice for mitre cuts and a full-stroke hydraulic vice with a tightening system. Bomar Workline 410.280DGH Standard Details: 2 way mitre – 60° right, 60° left Easy to read mitre scale DRO for mitre angle Long stroke hydraulic vice Powered bow raise Adjustable back off valve for optimising downfeed speed relative to material mass Control box mounted on swinging arm Simple, robust push button controls Variable blade speed 20 to 120m/min Dovetail sliding vice for mitre cutting 27mm blade width Bed height: 756mm

The Metlsaw NF range of plate saws are the premier saw for precision sawing of non-ferrous plate from 6mm – 300mm thick. Fully automatic sawing system Up to 12" thickness capacity 50 HP Arbor Motor Positioning (cut to length) tolerance to +/- 0.075mm Surface Finishes to 8 Micro-inch High speed close tolerance cutting Can eliminate/reduce secondary machining of parts Fast set up and part number memory Rapid sawing speeds Full size touchscreen operator interface PLC Controls by Rockwell Automation (AB) Easy Blade Change Available widths of 1.8M – 6M as standard

SK 450 is designed for the strait cutting operations of the large size of profiles made of PVC and aluminum by means of Ø450 mm of saw blade at 90°. It is ideal for the serial and precise slicing operations. Suitable for high-volume slicing of aluminum profiles for window manu facturing and industrial applications High precision servo motors and inter nationally recognized components Saving of time by means of servo con trolled workpiece infeed speed and saw blade stroke Horizontal and vertical clamping of the workpiece during the sawing operation Automatic table retraction feature that moves the cut material a small amount after cutting and before the blade came back down to prevent the re-cut & scratches High cutting accuracy by means of the robust mechanical structure Programmable spray saw blade lubrication system via control panel Large memory capacity for the cutting programs The machine shut down automatically after reaching the requested quantity

DC 550 SK is a full automatic sawing machine which is designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminum materials by means of double head sawing units equipped with Ø 550 mm of saw blades. Two-hand safety operation Equipped with CNC control system for precise angular adjustment Tilting range inwards 45° and outwards 22.5° Hydro-pneumatic saw feed Cutting accuracy +/- 0.1 mm 2 x pneumatic profile supports Windows based industrial PC and 15’’ LCD touch screen color monitor Facility to transfer the cutting list at ‘mdb’+'xls' format via USB and network Remote connection via internet and providing technical support Barcode printer & image print Automatic slicing feature Profile height measuring system (DC 550 SKH) The angle setting of the heads is ensured with servo control system The position setting of the moving head is en sured with servo control system STANDARD ACCESSORIES Equipped with saw blades 2 X Ø 550 mm

DC 421 PBS is a full automatic sawing machine which is designed for the strait or angular cutting operations of large size of profiles made of PVC and aluminum materials by means of double head sawing units equipped with Ø 420 mm of saw blades . Two-hand safety operation Tilting automatically to 90° and 45° in wards for both angles. Manual adjustment of intermediate angles from 90° to 45° inwards Tilting automatically 90° and 45° inwards both angles Automatic slicing feature at 90° Hydro-pneumatic saw blade feed Cutting accuracy +/- 0.2 mm Solid steel construction of the body Automatically closing safety guards Windows based industrial PC and 15’’ LCD touch screen color monitor Facility to transfer the cutting list in ‘mdb’+'xls' format via USB and network Automatic changeover mode from cut to cut without any operator input Technical support via remote connection capability Barcode printer & image print